End-of-Sale and End-of-Life Announcement for the Cisco Optostar II 1310nm Transmitters Select Optical Power Options

Available Languages

Download Options

PDF (174.8 KB)
View with Adobe Reader on a variety of devices

Updated:July 13, 2017

Document ID:1499966651513225

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

EOL11934

Cisco announces the end-of-sale and end-of-life dates for the Cisco Optostar II 1310nm Transmitters Select Optical Power Options. The last day to order the affected product(s) is January 12, 2018. Customers with active service contracts or active warranties will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the
end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active service contracts or active product warranties, support will be available for the shown dates as stated in the applicable service contracts or product warranty terms and conditions.

Table 1. End-of-Life Milestones and Dates for the Cisco Optostar II 1310nm Transmitters Select Optical Power Options

Milestone	Definition	Date
End-of-Life Announcement Date	The date the document that announces the end-of-sale and end-of-life of a product is distributed to the general public.	July 14, 2017
End-of-Sale Date: HW	The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.	January 12, 2018
Last Ship Date: HW	The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.	April 12, 2018
End of SW Maintenance Releases Date: HW	The last date that Cisco Engineering may release any final software maintenance releases or bug fixes. After this date, Cisco Engineering will no longer develop, repair, maintain, or test the product software.	January 12, 2019
End of Routine Failure Analysis Date: HW	The last-possible date a routine failure analysis may be performed to determine the cause of hardware product failure or defect.	January 12, 2019
End of New Service Attachment Date: HW	For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.	January 12, 2019
End of Service Contract Renewal Date: HW	The last date to extend or renew a service contract for the product.	April 9, 2022
Last Date of Support: HW	The last date to receive applicable service and support for the product as entitled by active service contracts or by warranty terms and conditions. After this date, all support services for the product are unavailable, and the product becomes obsolete^**. Warranty duration is based on product ship dates; refer to warranty terms and conditions for details.	January 31, 2023

HW = Hardware OS SW = Operating System Software App. SW = Application Software

Table 2. Product Part Numbers Affected by This Announcement

End-of-Sale Product Part Number	Product Description	Replacement Product Part Number	Replacement Product Description	Additional Information
4060002	OptoStar II 1310nm, Fwd Transmitter, 1GHz, 6dBm, SC/APC	4060006	OptoStar II 1310nm, Fwd Transmitter, 1GHz, 10dBm, SC/APC	-
4060003	OptoStar II 1310nm, Fwd Transmitter, 1GHz, 7dBm, SC/APC	4060006	OptoStar II 1310nm, Fwd Transmitter, 1GHz, 10dBm, SC/APC	-
4060004	OptoStar II 1310nm, Fwd Transmitter, 1GHz, 8dBm, SC/APC	4060006	OptoStar II 1310nm, Fwd Transmitter, 1GHz, 10dBm, SC/APC	-
4060005	OptoStar II 1310nm, Fwd Transmitter, 1GHz, 9dBm, SC/APC	4060006	OptoStar II 1310nm, Fwd Transmitter, 1GHz, 10dBm, SC/APC	-
4060007	OptoStar II 1310nm, Fwd Transmitter, 1GHz, 11dBm, SC/APC	4060009	OptoStar II 1310nm, Fwd Transmitter, 1GHz, 13dBm, SC/APC	-
4060008	OptoStar II 1310nm, Fwd Transmitter, 1GHz, 12dBm, SC/APC	4060009	OptoStar II 1310nm, Fwd Transmitter, 1GHz, 13dBm, SC/APC	-
4068038	OptoStar II Fwd Driver Amp, 1GHz	There is currently no replacement product available for this product.	-	-
4068039	OptoStar II RF Switch, 1GHz	There is currently no replacement product available for this product.	-	-
OS-II-F-T	OptoStar II Fiber Tray	There is currently no replacement product available for this product.	-	-
OS-II-M-B-P	OptoStar II Module Blank Panel	There is currently no replacement product available for this product.	-	-
OS-II-R-R-C	OptoStar II Reverse Receives Combiner	There is currently no replacement product available for this product.	-	-

Product Migration Options

Select power options of the Cisco Optostar II 1310 Transmitter products are being discontinued. The alternative for these discontinued power options will be the 10 dBm and 13 dBm Transmitters. These 2 power options will remain orderable until further notice.

Customers may be able to use the Cisco Technology Migration Program (TMP) where applicable to trade-in eligible products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, customers should work with their Cisco Partner or Cisco account team. Cisco Partners can find additional TMP information on Partner Central at: https://www.cisco.com/web/partners/incentives_and_promotions/tmp.html.

Customers may be able to continue to purchase the Cisco Optostar II 1310nm Transmitters Select Optical Power Options through the Cisco Certified Refurbished Equipment program. Refurbished units may be available in limited supply for sale in certain countries on a first-come, first-served basis until the Last Date of Support has been reached. For information about the Cisco Certified Refurbished Equipment program, go to: https://www.cisco.com/go/eos.

Service prices for Cisco products are subject to change after the product End-of-Sale date.

The Cisco Takeback and Recycle program helps businesses properly dispose of surplus products that have reached their end of useful life. The program is open to all business users of Cisco equipment and its associated brands and subsidiaries. For more information, go to: https://www.cisco.com/web/about/ac227/ac228/ac231/about_cisco_takeback_recycling.html.

For More Information

For more information about the Cisco End-of-Life Policy, go to: https://www.cisco.com/en/US/products/products_end-of-life_policy.html.

^**For more information about the Cisco Product Warranties, go to: https://www.cisco.com/en/US/products/prod_warranties_listing.html.

To subscribe to receive end-of-life/end-of-sale information, go to: https://www.cisco.com/cisco/support/notifications.html.

Subscribe for RSS Notifications for End-of-Life and End-of-Sale Notices

To subscribe to the End-of-Life and End-of-Sale RSS Feed, insert the following URL into your RSS application: https://www.cisco.com/web/feeds/products/end_of_life_rss.xml.

Any authorized translation issued by Cisco Systems or affiliates of this end-of-life Product Bulletin is intended to help customers understand the content described in the English version. This translation is the result of a commercially reasonable effort; however, if there are discrepancies between the English version and the translated document, please refer to the English version, which is considered authoritative.

Was this Document Helpful?

Feedback