Cisco Business Edition 3000

Cisco Business Edition 3000 8.6.4 Data Sheet

  • Viewing Options

  • PDF (481.0 KB)
  • Feedback

Product Overview

The Cisco® Business Edition 3000 is a purpose-built appliance that delivers essential business-class unified communications and collaboration for small and midsize businesses with up to 300 users and 400 devices located at up to 10 sites. Hosted on a compact hardware platform as shown in Figure 1, Cisco Business Edition 3000 integrates the benefits of voice, video, mobility, messaging, applications, and voice gateway services on a single appliance. Consolidating these capabilities on a single appliance creates a cost-effective solution that is both simple to set up and easy to manage; it also lowers the total cost of ownership (TCO) and provides a smooth transition from earlier, outdated telephony systems to a new-age unified communications and collaboration solution.

Figure 1.      Cisco Business Edition 3000

Benefits, Features, and Capacity

Business Benefits

Based on highly reliable, proven Cisco technology, the Cisco Business Edition 3000 offers your business these essential features:

   Connections for all your locations, with support for up 300 users and 10 sites

   Mobility capabilities at no extra charge to keep you connected at all times

   Voicemail and Automated-Attendant to help route critical calls and messages

   PC and mobile client applications for desk-phone functions when traveling

   Point-to-point video telephony that is as easy as a phone call

   Session Initiation Protocol (SIP) trunking capabilities for cost savings

   Advanced collaboration capabilities with instant messaging (IM), presence, and meetings when using Cisco WebEx® services

IT Benefits

The Cisco Business Edition 3000 provides the following benefits:

   Simple management interface for quick moves, adds, and changes

   Available country-specific localized dial plans to speed first-time setup

   Localized language interface for selected countries

   Efficient purpose-built equipment that combines a server and voice gateway

The Cisco Business Edition 3000 appliance includes two integrated T1/E1 ports for digital trunks. The solution supports SIP trunks to service providers using Cisco Unified Border Element to build a more flexible and complete collaboration solution such as:

   Additional T1/E1 connectivity using a Cisco Integrated Services Router (ISR) Voice Gateway

   Operator attendant console using the Cisco Unified Attendant Console Compact Edition (CUAC-CE)

   Instant messaging and presence using Cisco WebEx Messenger service

   Web conferencing using Cisco WebEx Meeting service

Features and Capacity

Table 1 details system capacity and features, Table 2 outlines system features, and Table 3 highlights user features for Cisco Business Edition 3000 Version 8.6.5.

Table 1.       System Capacity



Maximum number of users or devices

  300 users (400 endpoints or devices)

Total number of sites

  10 (with single country pack)

Number of remote sites

  9 (centralized call processing)

Telephony trunking protocols

  SIP, T1/E1 Primary Rate Interface (PRI), T1/E1 channel-associated signaling (CAS), and E1 R2 and analog (foreign exchange office [FXO])

T1/E1 support

  Through built-in gateway and Cisco 2901 Integrated Services Router (for an additional 2 ports per Cisco 2901)

SIP trunk

  SIP trunk to service provider SIP network for public switched telephone network (PSTN) access using session border elements

Analog trunk (FXO)

  Support for analog trunk using Cisco SPA8800 IP Telephony Gateway with 4 FXS and 4 FXO Ports

ISDN Basic Rate Interface (BRI)

  Through Cisco Integrated Services Router


  Maximum length of voicemail: 51 minutes per user; auto-purged after 15 days
  Maximum number of ports: 12 (combined concurrent sessions to Auto-Attendant and voicemail)


  Single-level Auto-Attendant across all sites
  Single language
  Day and night service with alternate greeting
  Maximum number of ports: 12 (combined concurrent sessions to Auto-Attendant and voicemail)

Attendant console

  Supported using Cisco Unified Attendant Console Compact Edition
  Maximum number of concurrent calls based on phone model
  Internal contacts (Cisco Business Edition 3000 phone users)
  Supported features: Make call, receive call, transfers, hold, paging, and ad-hoc conferencing
  Maximum number of attendant consoles: 10

IP endpoints

  Cisco Unified IP Phone 3905, 6901, 6911, 6921, 6941, 6945, 6961, 7925G, 7942G, 7945G, 7962G, 7965G, 7975G, 8941, 8945, and 8961 models
  Cisco Unified IP Phone 7975, 7965, and 7962 models
  Support for Cisco Unified IP Phone 7916 (24-button) and Cisco Unified IP ColorKey Expansion Module (KEM)
  Cisco Unified IP Phone 8961, which supports (36-button) Cisco Unified IP Color KEM
  Cisco Unified IP Conference Station 7937
  Cisco Jabber for Windows and Mac (cloud-based with Cisco WebEx Connect® service)
  Cisco Jabber for iPhone and Android
  Cisco UC Integration for RTX (China)
  Cisco IP Communicator(7.0 or later)
  Cisco UC Integration with WebEx Connect (7.1 or later)(CUCI-Connect)


  Ad-hoc conferencing and Meet-Me conferencing through onboard hardware conference bridge
  Maximum of 24 participants systemwide for conferencing
  Maximum of 4 participants in ad-hoc conference
  Maximum of 8 participants in Meet-Me conference

Music on Hold (MoH)

  Music source options:
   Connection to external audio source using 3.5-mm plug-in jack
   Upload audio file (file type: .wav)

Supported browsers

  Internet Explorer 8, Firefox 3.0, 4.0, and 10.0, and Safari 4.0 and 5.0

Country availability

  Brazil, China*, India, Indonesia, Mexico, and Russia*
  Limited availability** for Australia, United States, and United Kingdom

Language (country pack)

  English (U.S., U.K., Australia, and India), Portuguese (Brazil), Chinese (China), Spanish (Mexico), and Russian (Russia); one language per system


Dimensions (H x W x D)

  2.77 x 14.15 x 10.87 in. (70.4 x 359.4 x 276.15 mm)

Unit weight (maximum)

  7.72 lb (3.5 kg)


  Switching type (100 to 240V) automatic
  DC input voltage: 12 VDC at 8.5A
  Power adapter: 100 to 240V, 50 to 60 Hz AC input

Mounting mechanism

  Rack-mount and wall-mount


  cUL (United States and Canada)
  CB (Europe) and CQC (China)
* Cisco WebEx Connect and WebEx ® Meeting services are not available in China or Russia.
** Please contact a Cisco representative if you are a partner interested in reselling Cisco Business Edition 3000 in a country with limited availability.

Table 2.       System Features

System Features


Automatic number identification (ANI)

  Displayed in calling-line identification (caller ID)

Ready-to-use phone

  Phone auto-registration, without the need for manual configuration involving MAC addresses
  Interactive voice response (IVR)-based phone-user association (10 concurrent registration sessions)

Call Admission Control (CAC)

  Site-based CAC (bandwidth and call-quality management across sites)

Call Queuing

  Call Queuing feature allows incoming calls to be queued and provided with appropriate treatment, such as welcome and wait announcements and MoH, when phones in a hunt list are busy or not available
  Announcements and music are customized
  Single-level announcement for callers Users can see the real-time queue status on the phone and web admin or supervisor interface
  The maximum number of queues is 100
  Options on user agent (UA) association follow: Minimum no user agent in one queue, maximum 100 user agents in one queue
  The total number of user agents supported on Business Edition 3000 is 100

PSTN class of service (CoS)

  Internal, local, national, international, and emergency services predefined and cannot be changed

Centralized system administration

  Status and performance monitoring, reporting, and alarms
  Call detail records (CDRs) report and offloading
  Bulk device export, import, and update utility
  Manual Backup utility

Survivable Remote Site Telephony (SRST) on T1/E1 interface

  SRST-enabled Cisco ISR Gateway with license and configuration enables end users to stay connected during the loss of connectivity to Cisco Business Edition 3000
  Cisco 2901 (maximum of 35 phones) supports extension-to-extension dialing using IP phones and PSTN failover dialing using a T1/E1 interface. FXO and ISDN BRI PSTN failover are not supported
  Note: Cisco 800 ISR (maximum of 4 phones) supports extension-to-extension dialing using IP phones. PSTN dialing is not supported
  Only basic PSTN phone features are supported

Dial plan

  Extension length (3 to 8 digits)
  Preconfigured dial plan with short code dialing option
  Ability to create and customize the dial plan for supported countries
  Local PSTN breakout for remote sites
  Class of restriction, block, and translation patterns
  Direct inward dialing (DID) or direct dial inward (DDI) and direct outward dialing (DOD) support

Default distinctive ringtones

  Different ringtones defaulted for type of calls, including external call or internal calls

PSTN telephony

  Support for T1 PRI, E1 PRI, T1 CAS, and E1 R2 (Mexico and Brazil) with digital signaling type and non, semi, and full compelled inter-register signaling
  Support for analog trunk using Cisco SPA8800 IP Telephony Gateway with 4 FXO Ports
  Support for FXO, ISDN BRI, additional T1/E1, and SIP trunk with Cisco ISR

SIP trunk

  RFC 2833 dual-tone multifrequency (DTMF)
  Codecs: G.729a, G.729b, and G711mu; SIP T.38 fax
  Support for SIP options (ping, delayed offer, and early offer) using advanced connection pack

SIP phone and line-side support

  Support for phones in SIP mode

Analog phones (foreign exchange station [FXS] and FXO)

  FXS and FXO: Supported by Cisco SPA8800 IP Telephony Gateway with 4 FXS and 4 FXO Ports
  Cisco VG224 Analog Voice Gateway with 24 FXS ports


  Fax Pass-Through
  T.38 Fax-Relay
  Modem Pass-Through

Media Gateway Control Protocol (MGCP) ISDN

  T1/E1 PRI and T1-CAS

Quality of service (QoS)

  Differentiated Services (DiffServ) and IP Precedence (type of service [ToS])
  802.1p (class of service [CoS])
  Voice-quality statistics

Transcoding support

  On-server digital signal processor (DSP) that supports transcoding (10 sessions)

Table 3.       User Features

User Features



  Dial by number and dial by name are supported


  This feature allows a user to join an active call

Busy lamp field (BLF)

  A speed-dial button light illuminates when the destination phone is busy

Call back

  This feature provides users with an audio and visual alert on the phone when a busy or unavailable party becomes available

Call forwarding

  Call Forward All (CFA), Busy (CFB), and No Answer (CFNA) are supported
  Call Forward to Voicemail is supported

Call park

  Directed Call Park is supported

Call pickup

  Group Call Pickup (GPickUp) and Other Group Pickup (OPickup) are supported
  Directed Call Pickup is supported

Call waiting and call retrieve per line

  Consecutive call waiting and alerting per line are supported

Calling name identification (CNID)

  CNID over Q.931 facility information element is supported

Click to Call

  Outlook using Jabber® integration is supported
  Cisco WebDialer is supported
  Jabber Client is supported


  System Directory is the only directory supported

Emergency 911 (E911) support

  Emergency calling using the PSTN gateway of the local site is supported

Extension mobility

  Native extension mobility is supported
  Extension mobility on Cisco IP Communicator is supported

Hold and resume

  This feature enables users to hold and resume their calls

idivert to voicemail

  This feature allows a user to transfer a ringing, connected, or hold calls directly to voicemail

IP phone features

  Missed calls and the option to dial using missed call records are supported
  Placed calls and the option to dial using placed call records are supported
  Received calls and the option to dial using received call records are supported
  Do not disturb (DND) is supported
  SIP RFC 2833 Inband is supported
  Dynamic Host Configuration Protocol (DHCP) is supported
  Plus (+) number dialing is supported

Multiple line appearances per phone

  Two calls per line on selected phone models are supported
  The ability to select a specified line appearance is supported
  Shared or bridged line appearance is supported
  A maximum of six lines per phone is supported on select phone models

Multiple calls per shared line

  Two calls on shared lines are supported

Multiparty conferencing

  Ad-hoc conferencing with up to four participants is supported
  The drop last conference party feature is supported
  The list all or drop any conference party feature is supported

Meet-Me conferencing

  This feature allows a user to host a Meet-Me conference for up to eight participants

Native hunt groups

  Longest-idle, broadcast, sequential, and circular hunting are supported
  This feature supports the ability to forward to Auto-Attendant or an extension after hunting

Paging (using CUAC-CE)

  One-to-one paging is supported
  One-to-many paging using a multicast network is supported


  With this feature you can make a call to the last number dialed

Reach Me Anywhere (Single Number Reach)

  This feature allows association of another phone number (example: Mobile number to line 1 of user’s desk phone). External phone number integration is supported using ISDN PRI and SIP trunk

Speed dials

  User-programmable speed dials from the Admin and User GUI are supported


  Blind, consultative transfer and direct transfer are supported


  Integrated messaging (voicemail to email) using Internet Message Access Protocol (IMAP) and Simple Mail Transfer Protocol (SMTP) is supported
  Message waiting indicator (MWI) on the phone is supported


Cisco Business Edition 3000 supports localization for both user interface functions and administration interface.

Localization is supported through country pack file installation. Country packs include the following components:

   Dial plan

   Country-specific tones

   Localization components (needed only when a language other than English is used):

     Phone user interface language

     Prompt announcements in local language

     Self-care User portal (Preferences) localization

     Administration interface localization including online help

Cisco Business Edition 3000 is preinstalled with dial plans and tones for the following countries: India and the United States.

Additional Country pack file installation is required to support the following countries: Australia, Brazil, China, Indonesia, Mexico, Russia, and United Kingdom.

Ordering Information

To place an order use the Cisco Ordering tool or contact your local Cisco representative. Visit the Cisco Partner Locator tool on the Cisco website at Partner Locator - Cisco Systems, and search on “Unified Communications”. Check the box “Search for a partner specialized in small- or commercial-sized business” to find a certified unified communications partner in your area.

For detailed order information about Cisco Business Edition 3000, please refer to ordering guide at:

Service and Support

Cisco Business Edition 3000 is supported by the Cisco Technical Assistance Center (TAC). For detailed service mapping on related products for Cisco Business Edition 3000, please refer to the ordering guide at

For More Information

For more information about Cisco Business Edition 3000, please visit:

For more information about Cisco’s complete solution offerings for small and midsize businesses, please visit:

Cisco channel partners and resellers looking for ordering information should refer to the Cisco Business Edition 3000 Ordering Guide available with login on the Cisco partner site at: