Guest

Cisco 7800 Series Media Convergence Servers

Cisco Media Convergence Server 7825-H1

  • Viewing Options

  • PDF (103.9 KB)
  • Feedback
DATA SHEET

THIS PRODUCT IS NO LONGER BEING SOLD AND MIGHT NOT BE SUPPORTED. READ THE END-OF-LIFE NOTICE TO LEARN ABOUT POTENTIAL REPLACEMENT PRODUCTS AND INFORMATION ABOUT PRODUCT SUPPORT.

PRODUCT OVERVIEW

The Cisco ® Media Convergence Server 7825-H1 (MCS 7825-H1) is a powerful platform for the Cisco IP Communications applications. The Cisco MCS 7825-H1 occupies only 1 rack unit (RU) while providing the features most requested in a server platform at a very economical price point.

• Intel Pentium 4 3.4GHz processor, a 800MHz front side bus (FSB), and 1MB of Layer 2 cache

• PC3200 double-data-rate-1 (DDR1) 400MHz RAM

• Two gigabit network interface cards (NICs)

• Two 80GB serial advanced technology attachment (ATA) hard-disk drives configured in Redundant Array of Independent Disks (RAID) 1

• Quick-deployment third-party rail kit

• 350W power-factor-correction (PFC) power supply

• 1RU (1.75-in.) form factor

• Integrated Lights Out (ILO) remote management

SUPPORTED APPLICATIONS

The Cisco MCS 7825-H1 supports the following Cisco applications:

• Cisco CallManager-Up to 1000 IP phones per server and 4000 IP phones per cluster

• Cisco Conference Connection-Up to 60 conference ports

• Cisco Emergency Responder-Up to 12,000 IP phones

• Cisco Intelligent Contact Management (ICM) Enterprise

• Cisco ICM Hosted

• Cisco IP Contact Center (IPCC) Enterprise

• Cisco IPCC Hosted

• Cisco IPCC Express (Integrated Contact Distribution [ICD])

• Cisco IP Interactive Voice Response (IP IVR)

• Cisco IPICS

• Cisco Personal Assistant-Up to 2500 users per server

• Cisco Queue Manager

• Cisco Unity Unified Messaging-Up to 24 ports and 1000 mailboxes

KEY FEATURES AND BENEFITS

Performance

The Cisco MCS 7825-H1 is a robust, highly available server platform designed to support today's IP Communications applications. It uses a single Intel Pentium 4 3.4GHz processor with an 800MHz FSB.

Serviceability

System-Health LEDs

The Cisco MCS 7825-H1 provides system-health LEDs and unit-identification lights on the front and back of the server to make pinpointing system issues easier than ever. When an internal component fails, this indication is made on an internal-component LED (amber) and on the front panel of the Cisco MCS 7825-H1. If the item is serviceable by removing the hood, as in the case of a fan failure, the internal-health LED illuminates. If no failures have occurred, the system-health LED is green. If the failure is critical and has caused the system to shut down, the LED is red.

Redundant ROM

In the Cisco MCS 7825-H1, the ROM is divided into two logical parts. When the system boots, the primary ROM side is executed and used in server operation. During a ROM flash, the backup side is flashed. When the flash is fully completed, the backup side becomes the primary. If under rare conditions the flash does not complete safely, potentially because of a power interruption, the backup is available to boot the system. In the situation where both images are valid, the user can select which image to use at boot time.

Serviceable SATA Disk Drives

The Cisco MCS 7825-H1 is configured with two 80GB serial advanced technology attachment (SATA) "cold-pluggable" disk drives configured in a RAID 1 mirror set. The server continues to operate if either of the two disk drives fails. The SATA disk drives are accessible to the end user through openings in the front bezel of the server. If a drive fails, the end user can schedule server downtime, power down the server, and replace the failed SATA drive by simply removing it (each drive is equipped with a front latch that positively mates the drive to the server) and replacing it with an un-configured spare drive. After restarting the server, the RAID 1 firmware initiates a re-mirroring of the new drive to ensure that drive redundancy on the Cisco MCS 7825-H1 is maintained. The serial-drive technology introduced in the Cisco MCS 7825-H1 provides Cisco Systems ® customers with a highly reliable, high-performance, cost-effective solution.

DAT Tape Drive Support

The Cisco MCS 7825-H1 can support an optional 20 or 40GB external digital-audio-tape (DAT) drive. This tape drive connects through a Small Computer System Interface (SCSI) cable to an external SCSI port. The external DAT drive is orderable (part number MCS-EXT-DAT) and a PCI-based SCSI card is orderable (part number MCS-EXT-SCSI) to provide the external SCSI port. DAT support is only provided for Unity applications.

PRODUCT SPECIFICATIONS

Table 1 gives specifications of the Cisco MCS 7825-H1.

Table 1. Product Specifications of Cisco MCS 7825-H1

Features

Descriptions

Processor at Product Introduction

Processor (CPU)

Prescott Pentium 4

Processor internal clock speed

3.4GHz (or greater)

Level 2 cache

1MB

Maximum processors

1

Processors installed

1

Basic input/output system (BIOS) type

Flash memory

Memory

Memory maximum

4GB

Memory bus clock

400MHz

Memory technology

PC3200 DDR synchronous dynamic RAM (SDRAM)

Bit-error mitigation

Error Checking and Correction (ECC)

Total RAM slots

4

Memory installed

• 1GB (2 x 512) for ECS1 versions
• 2GB (2x 1GB) for CC1 and IPC1 versions
RAID Controller

Controller model

HP-integrated SATA RAID controller

Interface

Embedded to planar

Cache

64MB

Battery-backed write cache

Yes-128MB

RAID levels supported

1

Hard Disk

Hard disk installed

2 x 80GB

Hard-disk RPM

7200

Hard-disk interface type

SATA, 1.5 Gbps

Network Connectivity

Ethernet NIC

Dual onboard 10/100/1000

Connector

Two RJ-45 connectors on back of server

10BASE-T cable support

EIA Categories 3, 4, or 5 unshielded twisted-pair (UTP) (2 or 4 pair) up to 328 ft (10m)

100BASE-TX cable support

EIA Category 5 UTP (2 pair) up to 328 ft (10m)

1000BASE-T cable support

EIA category 6 UTP (recommended), Category 5E UTP, 5 UTP (2 pair) up to 328 ft (10m)

Expansion Options

PCI-X non-hot plug 133MHz, 64-bit slots

1 (full length)

PCI-X non-hot plug 100MHz, 64-bit slots

1 (half length)

Note: The Cisco 7825-H1 is not qualified for use with Cisco Unity voice cards for traditional PBX integration

Features

Benefits

Interfaces

Serial ports

1 RS-232D

Parallel ports

0

USB 2.0 ports

3 (1 at front and 2 at back of chassis)

Keyboard port

1 PS/2

Mouse port

1 PS/2

Audio ports

None

External SCSI port

None

Security
• Power-on password
• Keyboard password
• Diskette-drive control
• Disk-boot control
• Administrator's password
• Removable DVD-ROM and disk-drive assembly

Maximum input power

350W

Auto-ranging AC input

Yes

PFC

Yes

Input frequency range

47-63Hz

Operation input voltage ranges

• 90-132 VAC minimum
• 18-264 VAC maximum

Input current

• 3.3A (110 VAC)
• 1.7A (220 VAC)
Environmental

Air temperature-Server on

50 to 95°F (10 to 35°C)

Air temperature-Server off

-4 to 140°F (-20 to 60°C)

Humidity-Server on

10 to 90% (non-condensing)

Humidity-Server off

10 to 95%

BTU rating

870 BTU/hr (per 255W maximum configuration)

Sound emissions, idle

6.2 BELS (operating)

Cooling system

5 fans installed

Dimensions

Form factor

Rack-mount 1RU

Rack-mounting

Included for standard third-party rack

Weight Maximum

24.58 lb (11.15 kg)

Height

1.70 in. (4.32 cm)

Width

16.78 in. (42.62 cm)

Depth

24.0 in. (60.96 cm)

ORDERING INFORMATION

To place an order, visit the Cisco Ordering Home Page.
Table 2 gives ordering information for the Cisco Unity Unified Messaging system.

Table 2. Ordering Information for Cisco Unity Unified Messaging

Product Name

Part Number

Cisco CallManager 3.3

CALLMANAGER-3.3

Cisco CallManager 4.0

CALLMANAGER-4.0

Cisco CallManager 4.1

CALLMANAGER-4.1

Cisco Conference Connection

CCC-1.2

Cisco Emergency Responder

CER-1.2

Cisco ICM Enterprise

ICM-BUNDLE

Cisco ICM Hosted

HOSTED-BUNDLE

Cisco IPCC Enterprise

IPCE-BUNDLE

Cisco IPCC Hosted

HOSTED-BUNDLE

Cisco IPCC Express

PCX-3.Y-STANDARD. PCX-3.Y-ENHANCED, PCX-3.Y-PREMIUM

Cisco IP IVR

IPIVR-3.5=

Cisco IPICS Server Bundle for Branch Offices

CIS-7825-H1-K9

Cisco Personal Assistant

PASR-BUNDLE

Cisco Queue Manager

IPQM-3.5=

Cisco Unity Unified Messaging System

UNITY-BUNDLE

SERVER SPARES

To order spare servers reference the table below.

Table 3. Ordering Information for Spare Servers by Application

Application

Spare Part Number

Cisco CallManager

MCS-7825-H1-IPC1

Cisco Conference Connection

MCS-7825-H1-IPC1

Cisco Emergency Responder

MCS-7825-H1-IPC1

Cisco ICM Enterprise

MCS-7825-H1-CC1

Cisco ICM Hosted

MCS-7825-H1-CC1

Cisco IPCC Enterprise

MCS-7825-H1-CC1

Cisco IPCC Hosted

MCS-7825-H1-CC1

Cisco IPCC Express

MCS-7825-H1-CC1

Cisco IP IVR

MCS-7825-H1-CC1

Cisco IPICS

MCS-7825-H1-S31

Cisco MeetingPlace

MCS-7825-H1-IPC1

Cisco Queue Manager

MCS-7825-H1-CC1

Cisco Unity Unified Messaging System

MCS-7825-H1-ECS1

FIELD-REPLACEABLE SPARES

To order spare parts for the servers reference the table below.

Table 4. Ordering Information for Server Spare Parts

Spare Part Number

Description

MEM-7825-H1-512=

Spare 512MB SDRAM dual in-line memory module (DIMM) for Cisco MCS 7825-H1 server

MEM-7825-H1-1GB=

Spare 1GB SDRAM dual in-line memory module (DIMM) for Cisco MCS 7825-H1 server

HDD-7825-H1-80=

Spare 80GB SATA hard-disk drive, cold-pluggable

IDENTIFYING SERVER CPU SPEED

As the Cisco MCS 7825-H1 matures, the processor speeds will be changed as Intel retires slower processors and replaces them with faster processors. Table 5 provides the Cisco manufacturing part number that is shown on the chassis to help identify any processor speed of any individual server.

Table 5. Manufacturing Part Numbers by Processor Speed

Processor

Manufacturing Part Number Located on Server

Introduction

Intel Pentium 4 3.4GHz

74-3189-03

Initial production of server:

• MCS-7825-H1-ECS1
Intel Pentium 4 3.4 GHz

74-3908-01

Initial production of server:

• MCS-7825-H1-CC1
• MCS-7825-H1-IPC1

SERVICE AND SUPPORT

Cisco offers a wide range of services programs to accelerate customer success. These innovative services programs are delivered through a unique combination of people, processes, tools, and partners, resulting in high levels of customer satisfaction. Cisco services help you protect your network investment, optimize network operations, and prepare the network for new applications to extend network intelligence and the power of your business. For more information about Cisco services, refer to Cisco Technical Support Services or Cisco Advanced Services.

WARRANTY INFORMATION

Cisco offers a one-year limited hardware warranty on Cisco media convergence servers. For terms and conditions of this warranty, refer to  http://www.cisco.com/univercd/cc/td/doc/es_inpck/1y1cen__.htm.
Text Box:  Printed in the USA	C78-344126-03   03/08