Guest

Cisco Industrial Ethernet 3000 Series Switches

Cisco Industrial Ethernet 3000 Layer 2/Layer 3 Series Switches

Let Us Help

  • Viewing Options

  • PDF (534.4 KB)
  • Feedback

Product Overview

The Cisco® Industrial Ethernet 3000 Series (IE 3000 Series) is a family of Layer 2 and Layer 3 switches that bring Cisco’s leadership in switching to Industrial Ethernet applications with Innovative features, robust security, and superior ease of use. The Cisco IE 3000 Series features:

   Industrial design and compliance

   Tools for easy deployment, management, and replacement

   Network security based on open standards

   Integration of IT and industrial automation networks

The Cisco IE 3000 Series is an ideal product for Industrial Ethernet applications, including factory automation, energy and process control, and intelligent transportation systems (ITSs).

The Cisco IE 3000 offers:

   Design for Industrial Ethernet applications, including extended environmental, shock/vibration, and surge ratings; a complete set of power input options; convection cooling; and DIN-rail or 19” rack mounting

   Support for Power over Ethernet (PoE) up to 15.4W per port

   Support for Power over Ethernet Plus (PoE+) for the PoE+ capable devices up to 30W per port

   Easy setup and management using the Cisco Device Manager web interface and supporting tools, including Cisco Network Assistant (CNA) and Cisco Prime LMS 4.2

   Easy switch replacement using removable memory, allowing the user to replace a switch without having to reconfigure

   High availability, guaranteed determinism, and reliable security using Cisco IOS® Software

   Recommended software configurations for industrial applications that can be applied at the touch of a button

   Compliance to a wide range of Industrial Ethernet specifications covering industrial automation, ITS, substation, railway, and other markets

   Support for IEEE1588v2, a precision timing protocol with nanosecond-level precision for high-performance applications

   Improved ring resiliency with the support of Resilient Ethernet Protocol (REP)

   Transparent IT integration with the support of Layer 3 routing protocols (IP Services)

   PROFINET v2 certification, with PROFINET conformance class B compliance

   ABB Industrial IT certification

Configurations

The Cisco IE 3000 Series software, based on Cisco IOS Software, is a rich suite of intelligent services, supporting high availability, quality of service (QoS), and security features.

image_01

The Cisco IE 3000 Series includes the following products:

Table 1.       Cisco IE 3000 Switches

Description

Specification

Cisco IE-3000-4TC

image_02

  4 Ethernet 10/100 ports and 2 dual-purpose uplinks (each dual-purpose uplink port has one active port either 10/100/1000 copper or SFP fiber
  Support up to two expansion modules with various combinations  
  DC input range 18VDC-60VDC
  Layer 2 LAN Base Image

Cisco IE-3000-4TC-E

  Same as IE-3000-4TC with Layer 3 IP Services Image

Cisco IE-3000-8TC

image_03

  8 Ethernet 10/100 ports and 2 dual-purpose uplinks (each dual-purpose uplink port has one active port either 10/100/1000 copper or SFP fiber
  Support up to two expansion modules with various combinations  
  DC input range 18VDC-60VDC
  Layer 2 LAN Base Image

Cisco IE-3000-8TC-E

  Same as IE-3000-8TC with Layer 3 IP Services Image

Cisco IEM-3000-8TM=

image_04

  Expansion copper Module for Cisco IE-3000-4TC, IE-3000-8TC, IE-3000-4TC-E, and IE-3000-8TC-E switches, eight 10/100 TX ports
 

Cisco IEM-3000-8FM=

image_05

Expansion FX Fiber Module for Cisco IE-3000-4TC, IE-3000-8TC, IE-3000-4TC-E, and IE-3000-8TC-E switches, eight 100 FX ports

Cisco PWR-IE50W-AC=

  Expansion Power Module for Cisco IE-3000-4TC, IE-3000-8TC, IE-3000-4TC-E and IE-3000-8TC-E switches, supports input AC 100-240V/1.25A or Input DC 125-250V/1A, Output DC 24V/2.1A, DIN-Rail Mount, compatible with PWR-IE3000-AC

Cisco PWR-IE50W-AC-IEC=

  Expansion Power Module for Cisco IE-3000-4TC, IE-3000-8TC, IE-3000-4TC-E and IE-3000-8TC-E switches, supports Input AC 100-240V/1.25A 50-60Hz, Output DC 24V/2.1A, IEC Plug, DIN-Rail Mount

Cisco IEM-3000-4SM=

image_07

  Expansion SFP Module for IE-3000-4TC, IE-3000-8TC, IE-3000-4TC-E, and IE-3000-8TC-E switches, 4 100MB SFP ports
  Minimum IOS release 15.0(2)EY  

Cisco IEM-3000-8SM=

image_08

  Expansion SFP Module for IE-3000-4TC, IE-3000-8TC, IE-3000-4TC-E, and IE-3000-8TC-E switches, 8 100MB SFP ports
  Minimum IOS release 15.0(2)EY  

Cisco IEM-3000-4PC=

image_09

  Expansion PoE module for IE-3000-4TC, IE-3000-8TC, IE-3000-4TC-E, and IE-3000-8TC-E switches, support 4 ports 10/100 PoE/PoE+. External power source is required (44-57 VDC for PoE/ 50-57 VDC for PoE+)
  Minimum IOS release 15.0(2)EY2  

Cisco IEM-3000-4PC-4TC=

image_10

  Expansion PoE module for IE-3000-4TC, IE-3000-8TC, IE-3000-4TC-E, and IE-3000-8TC-E switches, support 4 ports 10/100 PoE/PoE+ and 4 ports non-PoE ports. External power source is required (44-57 VDC for PoE/ 50-57 VDC for PoE+)
  Minimum IOS release 15.0(2)EY2  

Cisco PWR-IE65W-PC-AC=

image_11

  AC-DC Power Module for PoE solution, Input AC 100-240V/1.4A, 50-60Hz or Input DC 125-250V/1A.     Output 54VDC/1.2 A, DIN-Rail Mount

Cisco PWR-IE65W-PC-DC=

image_12

  DC-DC Power Module for PoE solution, Input DC 18-60 V/4.3A, Output DC 54V/1.2A, DIN-Rail Mount

Industrial Ethernet Applications

The new Cisco IE 3000 Series is an ideal product for a variety of Industrial Ethernet applications:

   Industrial automation: The Cisco IE 3000 is designed to support a wide array of Industrial Ethernet protocols for automation. The Cisco IE 3000 features a programmable logic controller (PLC) form-factor design with extended environmental ratings, convection cooling, DIN-rail mounting, redundant 24VDC power input, alarm relays, and surge/noise immunity. The Cisco IE 3000 software and configuration tools allow for easy setup, optimized for Industrial Ethernet applications (for example, EtherNet/IP). Multicast control, traffic prioritization, and security features are specified in default templates recommended for these protocols.

   ITS: The Cisco IE 3000 supports ITS and other applications for outdoor video and traffic or transportation systems control. The switch supports compliance to NEMA TS-2, a variety of gigabit fiber uplinks, and AC and DC power input options, while Cisco IOS Software supports critical ITS features, including virtual LAN (VLAN), QoS, Internet Group Management Protocol (IGMP) snooping, and security access control lists (ACLs).

   Substations: The Cisco IE 3000 is fully compliant to substation automation specifications, including IEC61850 and IEEE1613. The switch supports high-speed ring recovery; fiber access and uplink ports; AC, DC, and a variety of power input options for the substation environments.

   Other applications: The Cisco IE 3000 can be deployed in railway, military, Metro Ethernet, and other applications requiring unique environmental, form factor, or power inputs in harsh environments.

Table 2 gives the features and benefits of the Cisco IE 3000 Series. Table 3 gives the hardware specifications, and Table 4 gives the power specifications. Table 5 lists the management and standards support, and Table 6 provides the safety and compliance information.

Table 2.       Features and Benefits of Cisco IE 3000 Series

Category

Feature/Benefit

Designed for industrial applications

  Extended temperature, vibration, shock and surge, and noise immunity ratings comply to specifications for automation, ITS, and substation environments.
  Compact, PLC-style form factor is ideal for deployment in industrial environments.
  DIN-rail, wall, and 19” rack mount options allow for deployments in a variety of control systems.
  Variety of power input options covers a wide range of power requirements for Industrial Ethernet applications.
  Up to 300 deployment configurations, supporting a range of access port densities, copper and fiber uplinks, fiber access ports, and power input, deliver flexibility in deployment.
  Support for SFP modules provides uplink connectivity supporting 100BASE-LX, 100BASE-FX, 1000BASE-SX, 1000BASE-LX, and 1000BASE-ZX options.
  Alarm relay contacts can be used for an external alert system.

Ease of deployment, management, and replacement

  Cisco Express Setup simplifies initial configuration with a web browser, eliminating the need for more complex terminal emulation programs.
  Cisco Smartports templates provide the option to apply a default global or interface-level macro with a recommended configuration, allowing the user to easily set up the switch in a configuration optimized for the specific application.
  Smartports templates for EtherNet/IP provide an optimized setup for these Industrial Ethernet protocols at the touch of a button.
  Swappable Flash memory is ideal for quick and easy switch replacement. Memory can be moved from one switch to another, so a switch can be replaced without the need to reconfigure software features.
  The Cisco IE 3000 can be managed by PROFINET based management tools. The IE 3000 has PROFINET v2 certification, with PROFINET conformance class B compliance.
  Simple Network Management Protocol (SNMP) (v1/v2/v3) support allows for management using traditional IT-based management tools, including CiscoWorks.
  Device Manager allows web-based switch configurations.
  DHCP port-based allocation retains the IP address on a per port basis and simplifies the end-host replacement in an industrial setting.
  HTTPS access
  Embedded Event Manager (EEM) provides real-time network event detection and on board automation
  Cisco Network Assistant (CNA) is a no-charge, Windows-based application that simplifies the administration of networks of up to 250 users. It supports the Cisco IE 3000 and a wide range of Cisco Catalyst ® intelligent switches. With CNA, users can manage Cisco Catalyst switches and launch the device managers of Cisco integrated services routers and Cisco Aironet ® WLAN access points. Configuration wizards need just a few user inputs to automatically configure the switch to optimally handle different types of traffic: control, voice, video, multicast, and high-priority data. For detailed CNA support information, please go to < http://www.cisco.com/en/US/products/ps5931/prod_release_notes_list.html>
  Cisco Prime LMS support. For detailed information, please go to < http://www.cisco.com/en/US/products/ps11200/products_device_support_tables_list.html>

Availability and scalability

  Virtual LANs (VLANs) allow for logical segmentation for a network for optimal use of bandwidth.
  802.1q trunking
  QoS classifies and prioritizes data, guaranteeing determinism for mission-critical data.
  IGMPv3 snooping provides fast client joins and leaves of multicast streams and limits bandwidth-intensive traffic to only the requestors. An additional querier allows this operation in a Layer 2 only environment.
  IGMP filtering provides multicast authentication by filtering out no subscribers and limits the number of concurrent multicast streams available per port.
  Per-port broadcast, multicast, and unicast storm control prevents faulty end stations from degrading overall systems performance.
  IEEE 802.1d Spanning Tree Protocol support for redundant backbone connections and loop-free networks simplifies network configuration and improves fault tolerance.
  EtherChannel LACP support for quick recovery and bandwidth utilization
  FlexLinks for fast recovery
  Cisco Hot Standby Router Protocol (HSRP) is supported to create redundant, failsafe routing topologies.
  Resilient Ethernet Protocol, scalable up to 130 nodes with a very fast convergence, 50ms.

Security

  IEEE 802.1x with VLAN assignment, guest VLAN, and voice VLAN allows dynamic port-based security, providing user authentication.
  Port-based ACLs for Layer 2 interfaces allow application of security policies on individual switch ports.
  MAC address filtering prevents the forwarding of any type of packet with a matching MAC address.
  Secure Shell (SSH) Protocol v2 and SNMPv3 provide network security by encrypting administrator traffic during Telnet and SNMP sessions. SSHv2 and the cryptographic version of SNMPv3 require a special cryptographic software image because of U.S. export restrictions.
  TACACS+ and RADIUS authentication enable centralized control of the switch and restrict unauthorized users from altering the configuration.
  MAC address notification allows administrators to be notified of users added to or removed from the network.
  Dynamic Host Configuration Protocol (DHCP) snooping allows administrators to help ensure consistent mapping of IP to MAC addresses. This can be used to prevent attacks that attempt to poison the DHCP binding database and to rate limit the amount of DHCP traffic that enters a switch port.
  DHCP Interface Tracker (Option 82) augments a host IP address request with the switch port ID.
  Port security secures the access to an access or 802.1q trunk port based on MAC address.
  After a specific time frame, the aging feature removes the MAC address from the switch to allow another device to connect to the same port.
  Trusted Boundary provides the ability to trust the QoS priority settings if an IP phone is present and to disable the trust setting if the IP phone is removed, thereby preventing a malicious user from overriding prioritization policies in the network.
  Up to 512 ACLs are supported, with two profiles: Security (384 Security ACL entries and 128 QoS policies) and QoS (128 Security ACL entries and 384 QoS polices).
  Cisco standard and extended IP security router ACLs define security policies on routed interfaces for control-plane and data-plane traffic.
  Dynamic ARP Inspection helps ensure user integrity by preventing malicious users from exploiting the insecure nature of the ARP protocol.
  DHCP Snooping prevents malicious users from spoofing a DHCP server and sending out bogus addresses. This feature is used by other primary security features to prevent a number of other attacks such as ARP poisoning.
  IP source guard prevents a malicious user from spoofing or taking over another user's IP address by creating a binding table between client's IP and MAC address, port, and VLAN.
  Support for private VLANs and SXP (SGT Exchange Protocol)

High-performance IP routing

  Inter-VLAN IP routing for full Layer 3 routing between 2 or more VLANs.
  Basic IP unicast routing protocols (static, Routing Information Protocol Version 1 [RIPv1], RIPv2 and RIPng).
  Advanced IP unicast routing protocols (Open Shortest Path First [OSPF], Interior Gateway Routing Protocol [IGRP], Enhanced IGRP [EIGRP], Border Gateway Protocol Version 4 [BGPv4], and Intermediate System-to-Intermediate System [IS-IS]) are supported for load balancing and constructing scalable LANs.
  Protocol Independent Multicast (PIM) for IP multicast routing is supported, including PIM sparse mode (PIM-SM), PIM dense mode (PIM-DM), and PIM sparse-dense mode.
  Cisco Express Forwarding hardware routing architecture delivers extremely high-performance IP routing.
  IPv6 routing (OSPFv6 and EIGRPv6) support in hardware for maximum performance.
  Policy-based routing (PBR) allows superior control by facilitating flow redirection regardless of the routing protocol configured.
  HSRP provides dynamic load balancing and failover for routed links; up to 32 HSRP links supported per unit.
  Support for 1000 multicast groups.
  VRF-Lite virtualization

Table 3.       Cisco IE 3000 Series Switch Hardware

Description

Specification

Performance

  Wire-speed switching, 16 Gbps switching fabric
  Forwarding rate based on 64-byte packets: 6.5 Mpps
  128 MB DRAM
  64 MB Compact Flash memory
  Configurable up to 8000 MAC addresses (Layer 2)
  Configurable up to 2000 MAC addresses (Layer 3)
  Configurable up to 256 IGMP multicast groups (Layer 2)
  Configurable up to 1000 IGMP groups and multicast routes (Layer 3)
  Configurable up to 3,000 unicast routes (Layer 3)
   Support jumbo frames up to 9018 bytes on Gigabit uplink port and mini-jumbo frame (system MTU) up to 1998 bytes on both 10/100 and 10/100/1000 ports

Connectors and cabling

  10BASE-T ports: RJ-45 connectors, two-pair Category 3, 4, or 5 unshielded twisted-pair (UTP) cabling
  100BASE-TX ports: RJ-45 connectors, two-pair Category 5 UTP cabling
  1000BASE-T ports: RJ-45 connectors, four-pair Category 5 UTP cabling
  1000BASE-SX, -LX/LH, -ZX SFP-based ports: LC fiber connectors (single/multimode fiber)
  100BASE-LX10, -FX: LC fiber connectors (single/multimode fiber)

Indicators

  Per-port status LED: Link integrity, disabled, activity, speed, full-duplex indications
  System-status LED: System, link status, link duplex, link speed, indications

Dimensions

(H x W x D)

  Cisco IE-3000-4TC, Cisco IE-3000-4TC-E: 6.0”W x 5.8”H x 4.4”D (152mm W x 147mm H x 112mm D)
  Cisco IE-3000-8TC, Cisco IE-3000-8TC-E: 6.0”W x 5.8”H x 4.4”D (152mm W x 147mm H x 112mm D)
  Cisco IEM-3000-8TM=: 3.5”W x 5.8”H x 4.4”D (89mm W x 147mm H x 112mm D)
  Cisco IEM-3000-8FM=: 3.5”W x 5.8”H x 4.4”D (89mm W x 147mm H x 112mm D)
  Cisco IEM-3000-4SM=: 3.5”W x 5.8”H x 4.4”D (89mm W x 147mm H x 112mm D)
  Cisco IEM-3000-8SM=: 3.5”W x 5.8”H x 4.4”D (89mm W x 147mm H x 112mm D)
  Cisco IEM-3000-4PC=: 3.5”W x 5.8”H x 4.4”D (89mm W x 147mm H x 112mm D)
  Cisco IEM-3000-4PC-4TC=: 3.5”W x 5.8”H x 4.4”D (89mm W x 147mm H x 112mm D)
  Cisco PWR-IE50W-AC=: 2.0”W x 5.8”H x 4.4”D (51mm W x 147mm H x 112mm D)
  Cisco PWR-IE50W-AC-IEC=: 2.0”W x 5.8”H x 4.4”D (51mm W x 147mm H x 112mm D)
  Cisco PWR-IE65W-PC-AC=: 2.6”W x 5.9”H x 4.6”D (66mm W x 150mm H x 117mm D)
  Cisco PWR-IE65W-PC-DC=: 2.6”W x 5.9”H x 4.6”D (66mm W x 150mm H x 117mm D)

Weight

  Cisco IE-3000-4TC, Cisco IE-3000-4TC-E: 4.4 lb (2.0 kg)
  Cisco IE-3000-8TC, Cisco IE-3000-8TC-E: 4.4 lb (2.0 kg)
  Cisco IEM-3000-8TM=: 2.2 lb (1.0 kg)
  Cisco IEM-3000-8FM=: 3.2 lb (1.45 kg)
  Cisco IEM-3000-4SM=: 2.5 lb (1.1 Kg)
  Cisco IEM-3000-8SM=: 3.0 lb (1.38 Kg)
  Cisco IEM-3000-4PC=: 2.4 (1.08 Kg)
  Cisco IEM-3000-4PC-4TC=: 2.5 (1.16 Kg)
  Cisco PWR-IE50W-AC=: 1.4 lb (0.65 kg)
  Cisco PWR-IE50W-AC-IEC=: 1.4 lb (0.65kg)
  Cisco PWR-IE65W-PC-DC=: 2.6 (1.18 Kg)
  Cisco PWR-IE65W-PC-AC=: 2.7 (1.24 Kg)

Environmental ranges

  Operating temperature: -40 to 167ºF (-40 to 75ºC)
  Storage temperature: -40 to 185ºF (-40 to 85ºC)
  Operating relative humidity: 10 to 95% (non-condensing)
  Operating altitude: Up to 13,000 ft (3963m)
  Storage altitude: Up to 15,000 ft (4573m)

Mean time between failure (MTBF)

  Cisco IE-3000-4TC, Cisco IE-3000-4TC-E: 363,942
  Cisco IE-3000-8TC, Cisco IE-3000-8TC-E: 329,451
  Cisco IEM-3000-8TM=: 926,999
  Cisco IEM-3000-8FM=: 264,689
  Cisco IEM-3000-4SM=: 8,887,990
  Cisco IEM-3000-8SM=: 7,732,890
  Cisco IEM-3000-4PC=: 1,494,990
  Cisco IEM-3000-4PC-4TC=: 1,291,440
  Cisco PWR-IE50W-AC=: 1,662,359
  Cisco PWR-IE50W-AC-IEC=: 1,662,359
  Cisco PWR-IE65W-PC-DC=: 2,468,430
  Cisco PWR-IE65W-PC-AC=: 2,488,401

Table 4.       Power Specifications for Cisco IE3000 Series Switch

Description

Specification

Maximum power consumption

  Cisco IE-3000-4TC, Cisco IE-3000-4TC-E: 15.1W
  Cisco IE-3000-8TC, Cisco IE-3000-8TC-E: 15.7W
  Cisco IEM-3000-8TM=: 2.8W
  Cisco IEM-3000-8FM=: 10.1W
  Cisco IEM-3000-4SM=: 7.6W
  Cisco IEM-3000-8SM=: 12.2W
  Cisco IEM-3000-4PC=: 7.3W
  Cisco IEM-3000-4PC-4TC=: 7.9W

Input voltage and currents supported

  Cisco IE-3000-4TC, Cisco IE-3000-8TC, 18-60VDC
  Cisco IEM-3000-4PC=, IEM-3000-4PC-4TC=: 44-57V input
  Cisco PWR-IE50W-AC=: 100-240VAC/1.25A or 125-250VDC/1A
  Cisco PWR-IE50W-AC-IEC=: 100-240VAC/1.25A, 50-60Hz
  Cisco PWR-IE65W-PC-DC=: 18-60VDC/4.3A  
  Cisco PWR-IE65W-PC-AC=: 100-240VAC/1.4A or 125-250V/1A  

Power rating

  Cisco IE-3000-4TC, Cisco IE-3000-4TC-E: .05KVA
  Cisco IE-3000-8TC, Cisco IE-3000-8TC-E: .05KVA

Table 5.       SFP Transceivers Support for Cisco IE 3000 Series Switch

SFP Transceivers

Specification

Industrial Temperature

100-Megabit Transceivers

  GLC-FE-100FX-RGD 100BASE-FX, 2km /MMF
  GLC-FE-100LX-RGD 100BASE-LX,10km/SMF

Industrial Temperature

Gigabit Uplink

  GLC-SX-MM-RGD 1000BASE-T 2, 220-550m/MMF
  GLC-LX-SM-RGD 1000BASE-LX/LH 550m/MMF, 10km/SMF
  GLC-ZX-SM-RGD 10000BASE-ZX 70-100km/SMF

Commercial Temperature

100-Megabit Transceivers

  GLC-FE-100FX 100BASE-FX, 2km/MMF
  GLC-FE-100LX 100BASE-LX, 10km/SMF
  GLC-FE-100EX 100BASE, 40km/SMF
  GLC-FE-100ZX 100BASE, 80km/SMF
  GLC-FE-100BX-D 10km/SMF
  GLC-FE-100BX-U 10km/SMF

Commercial Temperature

Gigabit Uplink

  GLC-SX-MM 1000BASE-SX, 220-500m/MMF
  GLC-LH-SM 1000BASE-LH, 550m/MMF, 10km/SMF
  GLC-SX-MMD 1000BASE-SX, 220-500m/MMF, DOM
  GLC-LH-SMD 1000BASE-LH, 550m/MMF, 10km/SMF, DOM
  GLC-EX-SMD 1000BASE-EX, 40km, DOM
  GLC-ZX-SMD 1000BASE-ZX, 70-100km/SMF, DOM
  GLC-BX-D 1000BASE-BX10 10km/SMF
  GLC-BX-U 1000BASE-BX10 10km/SMF
  CWDM SFP 100km/SMF
  DWDM SFP
  GLC-T GE copper SFP transceiver

Table 6.       Compliance Specifications

Description

Specification

Standard safety certifications

  UL 60950-1
  CSA C22.2 No. 60950-1
  TUV/GS to EN 60950-1
  CB to IEC 60950-1 with all country deviations
  NOM

Mechanical stability

  Shock 20g (operational), 30g (nonoperational)

Electromagnetic Emissions

  FCC Part 15 Class A
  EN 55022
  CISPR 22
  CISPR11
  VCCI Class A
  AS/NZS 3548 Class A
  CNS 13438 Class A
  KN 22 Class A

Electromagnetic Immunity

  EN 55024
  AS/NZS CISPR 24
  KN 24  
  IEC/EN 61000-4-2 (Electro Static Discharge)
  IEC/EN 61000-4-3 (Radiated Immunity)
  IEC/EN 61000-4-4 (Fast Transients)
  IEC/EN 61000-4-5 (Surge)
  IEC/EN 61000-4-6 (Conducted Immunity)
  IEC/EN 61000-4-8 (Power Frequency Magnetic Field Immunity)
  IEC/EN 61000-4-9 (Pulse Magnetic Field Immunity)
  IEC/EN 61000-4-10 (Oscillatory Magnetic Field Immunity)
  IEC/EN 61000-4-11 (AC power Voltage Immunity)
  IEC/EN 61000-4-16 (Low Frequency Conducted CM Disturbances)
  IEC/EN 61000-4-17 (Ripple on DC Input Power)
  IEC/EN 61000-4-18  (Damped Oscillatory Wave)
  IEC/EN 61000-4-29 (Voltage Dips Immunity, DC power)
  IEEE C37.90 (Surge)
  IEEE C37.90.1 (Fast Transients)
  IEEE C37.90.2 (Radiated Immunity)
  IEEE C37.90.3 (Electro Static Discharge)

Industry specifications

  EN 61131-2 Programmable Controllers (EMC/EMI, environmental, mechanical)
  IEEE 1613 Power Station and Substation Networking Devices
  IEC 61850-3 Power Station and Substation Communication Networks and Systems
  EN 61326-1 Electrical Equipment for Measurement, Control and Laboratory Use - EMC
  EN 61000-6-1 Immunity for Light Industrial Environments
  EN 61000-6-2 Immunity for Industrial Environments
  EN 61000-6-4 Emissions for Industrial Environments
  TS 61000-6-5 EMC Immunity for Power Station and Substation
  EN 50155 Railway, Electronic Equipment on Rolling Stock (EMI/EMC, environmental, mechanical)
  EN 50121-3-2 Railway, Electromagnetic Compatibility on Rolling Stock
  EN 50121-4 Railway, Emission and Immunity of Signaling and Telecommunications Apparatus
  EN 60945 Maritime Navigation and Radio-communication Equipment and Systems
  IEC 60533 Shipboard Electrical and Electronic Installation EMC
  Marine Type Approval (BV, DNV,Korean Register, Lloyd Register)
  NEMA TS-2  (EMC, environmental, mechanical)
  ABB Industrial IT certification
  ODVA Industrial EtherNet/IP support
  PROFINETv2 support
  Directive 2011/65/EU  RoHS
  IP20

Hazardous locations

  UL/CSA 60079-0, -15  (Class 1, Div 2 A-D) (requires cabinet enclosure)
  EN 60079-0, -15 ATEX Certification (Class 1, Zone 2 A-D) (requires cabinet enclosure)
  IEC 60079-0, -15  (Test report only) (requires cabinet enclosure)
  UL 508
  CSA C22.2 No. 142

Compliance Marking

  UL/CSA
  CE (Europe)
  C-Tick (Australia/New Zealand)
  KCC  (Korea)
  ANATEL (Brazil)
  China RoHS

Operating Temperature

  -40 C to +70 C (vented enclosure operating)
  -40 C to +60 C (sealed enclosure operating)
  -34 C to +75 C (fan or blower-equipped enclosure operating)
  -40 C to +85 C (IEC Environmental Type Testing, 16 hours)
  Operational altitude: Up to 13,000 ft

Storage Temperature

  -40 C to +85 C (storage temperature)
  Storage altitude: Up to 15,000 ft

Humidity

  Relative humidity: 5% to 95% non-condensing

Telco

  Common Language Equipment Identifier (CLEI) code

Warranty

  Five year limited warranty

 

Service and Support

Cisco is committed to minimizing total cost of ownership (TCO). The company offers a portfolio of technical support services to help ensure that its products operate efficiently, remain highly available, and benefit from the most up-to-date system software. The services and support programs described in Table 7 are available as part of the Cisco Desktop Switching Service and Support solution and are available directly from Cisco and through resellers.

Table 7.       Cisco Services and Support Programs

Service and Support

Features

Benefits

Advanced Services

  Cisco Total Implementation Solutions (TIS), available direct from Cisco
  Cisco Packaged TIS, available through resellers
  Cisco SMARTnet ® and SMARTnet Onsite support, available direct from Cisco
  Cisco Packaged SMARTnet support program, available through resellers
  Cisco SMB Support Assistant
  Project management
  Site survey, configuration, and deployment
  Installation, text, and cutover
  Training
  Major moves, adds, and changes
  Design review and product staging
  Access to software updates 24 hours
  Web access to technical repositories
  Telephone support through the Cisco Technical Assistance Center (TAC)
  Advance replacement of hardware parts
  Supplements existing staff
  Helps ensure that functions meet needs
  Mitigates risk
  Helps enable proactive or expedited issue resolution
  Lowers TCO by taking advantage of Cisco expertise and knowledge
  Minimizes network downtime

Ordering Information

Table 8 gives ordering information for the Cisco IE 3000 Series.

Table 8.       Ordering Information for Cisco IE 3000 Series

Description

Specification

IE-3000-4TC

  Industrial Ethernet switch
  4 Ethernet 10/100 ports and 2 dual-purpose uplinks (each dual-purpose uplink port has 1 10/100/1000 Ethernet port and 1 SFP-based Gigabit Ethernet port, 1 port active)
  Each switch supports 2 Cisco modules, 1 Cisco IEM-3000-8FM= module, or 1 Cisco IEM-3000-8TM= module and 1 Cisco IEM-3000-8FM= module
  Layer 2 LAN Base image installed

IE-3000-8TC

  Industrial Ethernet switch
  8 Ethernet 10/100 ports and 2 dual-purpose uplinks (each dual-purpose uplink port has 1 10/100/1000 Ethernet port and 1 SFP-based Gigabit Ethernet port, 1 port active)
  Each switch supports 2 Cisco IEM-3000-8TM= modules, 1 Cisco IEM-3000-8FM= module, or 1 Cisco IEM-3000-8TM= module and 1 Cisco IEM-3000-8FM= module
  Layer 2 LAN Base image installed

IE-3000-4TC-E

  Industrial Ethernet switch
  4 Ethernet 10/100 ports and 2 dual-purpose uplinks (each dual-purpose uplink port has 1 10/100/1000 Ethernet port and 1 SFP-based Gigabit Ethernet port, 1 port active)
  Each switch supports 2 Cisco modules, 1 Cisco IEM-3000-8FM= module, or 1 Cisco IEM-3000-8TM= module and 1 Cisco IEM-3000-8FM= module
  Layer 3 IP Services image installed

IE-3000-8TC-E

  Industrial Ethernet switch
  8 Ethernet 10/100 ports and 2 dual-purpose uplinks (each dual-purpose uplink port has 1 10/100/1000 Ethernet port and 1 SFP-based Gigabit Ethernet port, 1 port active)
  Each switch supports 2 Cisco IEM-3000-8TM= modules, 1 Cisco IEM-3000-8FM= module, or 1 Cisco IEM-3000-8TM= module and 1 Cisco IEM-3000-8FM= module
  Layer 3 IP Services image installed

IEM-3000-8TM=

  Expansion Copper module for Cisco IE-3000-4TC and IE-3000-8TC switches
  8 10/100 TX ports

IEM-3000-8FM=

  Expansion Fiber module for Cisco IE-3000-4TC and IE-3000-8TC switches
  8 100 FX ports

IEM-3000-4SM=

  Expansion SFP module for Cisco IE-3000-4TC and IE-3000-8TC switches
  4 100M SFP ports

IEM-3000-8SM=

  Expansion SFP module for Cisco IE-3000-4TC and IE-3000-8TC switches
  8 100M SFP ports

IEM-3000-4PC=

  Expansion PoE/PoE+ module for Cisco IE-3000-4TC and IE-3000-8TC switches
  4 10/100 PoE/PoE+ ports
  External PoE power source (44-57 VDC for PoE/ 50-57 VDC for PoE+)

IEM-3000-4PC-4TC=

   Expansion PoE/PoE+ module for Cisco IE-3000-4TC and IE-3000-8TC switches
  4 non-PoE ports and 4 10/100 PoE/PoE+ ports
  External PoE power source (44-57 VDC for PoE/ 50-57 VDC for PoE+)

PWR-IE50W-AC=

  Expansion power module for IE-3000-4TC and IE-3000-8TC switches

PWR-IE50W-AC-IEC=

  Expansion power module for IE-3000-4TC and IE-3000-8TC switches

PWR-IE65W-PC-AC=

  AC-DC, 54VDC power module to support 65 watts for PoE/PoE+ modules

PWR-IE65W-PC-DC=

  DC-DC, 54VDC power module to support 65 watts for PoE/PoE+ modules

CAB-SM-LCSC-1M

  1m-fiber single-mode LC-to-SC connectors

CAB-SM-LCSC-5M

  5m-fiber single-mode LC-to-SC connectors

CF-IE3000=

  IE 3000 Compact Flash

PWR-IE3000-CLP=

  IE 3000 Power Transformer Spare connector clip

PWR-IE3000-CNCT=

  IE 3000 Power Spare connector

LPNL-IE3000=

   IE 3000 Left Panel Spare

RPNL-IE3000=

   IE 3000 Right Panel Spare

DINCLP-IE3000=

  Din-rail clip 4 pack Spare

BMP-IE3000=

  Din-rail clip bumper 4 pack Spare

STK-RACKMNT-2955=

  Din-rail adapter for rack mounting

For more information about Cisco products, contact:

   United States and Canada: 800 553-6387

   Europe: 32 2 778 4242

   Australia: 612 9935 4107

   Other: 408 526-7209

   URL: www.cisco.com