PDF(35.0 KB) View with Adobe Reader on a variety of devices
Updated:December 16, 2005
Document ID:1518507980144354
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Product Bulletin No. EOL1007
Cisco Systems
® announces the end-of-sale and end-of life dates for the Cisco
® MDS 9500 Series 1900W DC, 2500W DC, and 4000W AC/DC Power Supplies. The last day to order the affected products is June 16, 2006. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) until June 15, 2011. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product. Table 2 lists the product part numbers affected by this announcement.
Table 1. End-of-Life Milestones and Dates for the Cisco MDS 9500 Series 1900W DC, 2500W DC, 4000W AC/DC Power Supplies.
Milestone
Definition
Date
End-of-Life Announcement Date
The date the document that announces the end of sale and end of life of a product is distributed to the general public.
December 16, 2005
End-of-Sale Date
The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.
June 16, 2006
Last Shipment Date
The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.
June 16, 2006
End of Routine Failure Analysis Date
The last-possible date a routine failure analysis may be performed to determine the cause of product failure or defect.
June 16, 2007
End of New Service Attachment Date
For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.
June 16, 2007
End of Service Contract Renewal Date
The last date to extend or renew a service contract for the product.
September 11, 2010
Last Date of Support
The last date to receive service and support for the product. After this date, all support services for the product are unavailable, and the product becomes obsolete.
June 15, 2011
Table 2. Product Part Numbers Affected by This Announcement
End-of-Sale Product Part Number
Product Description
DS-CAC-4000W-INT
4000W AC Power Supply International
DS-CAC-4000W-INT=
4000W AC Power Supply International, Spare
DS-CAC-4000W-US
4000W AC Power Supply for US
DS-CAC-4000W-US=
4000W AC Power Supply for US, Spare
DS-CDC-1900W
1900W DC Power Supply
DS-CDC-1900W=
1900W DC Power Supply
DS-CDC-2500W
2500W DC Power Supply
DS-CDC-2500W=
2500W DC Power Supply, Spare
DS-CDC-4000W-INT
4000Watt DC Power Supply for US (cable attached)
DS-CDC-4000W-INT=
4000Watt DC Power Supply for US (cable attached)
DS-CDC-4000W-US
4000Watt DC Power Supply for US (cable attached)
DS-CDC-4000W-US=
4000Watt DC Power Supply for US (cable attached)
PRODUCT MIGRATION OPTIONS
There is no replacement product for the 1900W DC, 2500W DC, US and International 4000W DC, US and International 4000W AC power supplies at this time.
Cisco does not offer trade-in credits or a trade-in program.
Feedback