Guest

Cisco Carrier Routing System

Cisco CRS 8-Slot Line-Card Chassis Route Processor

  • Viewing Options

  • PDF (190.3 KB)
  • Feedback
The Cisco ® CRS-1 Carrier Routing System is the industry's first carrier router offering continuous system operation, unprecedented service flexibility, and system longevity. The Cisco CRS-1 is powered by Cisco IOS ® XR Software - a unique self-healing, distributed operating system designed for always-on operation while scaling system capacity up to 92 Tbps. The innovative system architecture combines the Cisco Silicon Packet Processor, the first programmable 40-Gbps application-specific integrated circuit (ASIC), with the Cisco Service Separation Architecture for unprecedented service flexibility and speed to service. The Cisco CRS-1 marks a new era in carrier IP Communications by powering the foundation for network and service convergence today while protecting investments for decades to come.
This data sheet provides detailed product specifications for the Cisco CRS-1 8-Slot Line-Card Chassis Route Processor. For more information about the Cisco CRS-1 or other interfaces available on the Cisco CRS-1, visit: http://www.cisco.com/go/crs.

Product Specifications

Table 1. Specifications of Cisco CRS-1 8-Slot Line-Card Chassis Route Processor.

Feature

Description

Chassis Compatibility

Compatible with the Cisco CRS-1 and CRS-3 8-Slot Line-Card Chassis

Software Compatibility

Cisco IOS XR Software Release 3.00 or higher for CRS-1

Cisco IOS XR Software Release 4.0.0 or later for CRS-3

Protocols

Cisco Discovery Protocol

IPv4 and IPv6 addressing

Internet Control Message Protocol (ICMP)

Layer 3 routing protocols, including Border Gateway Protocol Version 4 (BGPv4), Open Shortest Path First Version 2 (OSPFv2), OSPFv3, Intermediate System-to-Intermediate System Protocol (IS-IS)

Multicast forwarding with support for source-based and shared distribution trees and the following protocols:

• Protocol Independent Multicast sparse mode (PIM-SM)
• Bi-directional PIM (Bidir-PIM)
• PIM Source Specific Multicast (PIM SSM)
• Automatic route processing (AutoRP)
• Internet Group Management Protocol (IGMP) versions 1,2 and 3
• Multiprotocol BGP (MBGP)
• Multicast Source Discovery Protocol (MSDP)

Multiprotocol Label Switching (MPLS)

• MPLS Label Distribution Protocol (LDP)
• Resource Reservation Protocol (RSVP)
• Diffserv Aware TE

MPLS Traffic Engineering control plane (RFCs 2702 and 2430)

Route Policy Language (RPL)

Management:

• Simple Network Management Protocol (SNMP)
• Programmatic interfaces (XML)

Security:

• Message Digest Algorithm (MD5)
• IP Security (IPSec) Protocol
• Secure Shell (SSHv2)
• Secure FTP (SFTP)
• Secure Sockets Layer (SSL)

Connectivity

• Console port (RJ-45 connector)
• Auxiliary port (RJ-45 connector)
• One 10/100/1000 Ethernet port (RJ-45 connector)
• Two 10/100/1000 Ethernet ports (1000BASE-LX Small Form-Factor Pluggable (SFP)-LC connector, 10 km) for control-plane connectivity

Memory

• 4 GB of route memory
• 64 MB of boot Flash memory
• 2 MB of NVRAM
• One 1-GB PCMCIA card (internal)
• One 40-GB hard drive

Options

• 4 GB of route memory (two 2-GB modules)
• One 1-GB PCMCIA card

Performance

One 1.2-GHz Power PC

Reliability and Availability

Software Features:

• Cisco Nonstop Forwarding (NSF)
• Hot Standby Router Protocol (HSRP) and Virtual Router Redundancy Protocol (VRRP)
• Online insertion and removal (OIR)
• MPLS Fast Reroute (FRR)

MIBs

SNMP Framework Support:

• SNMPv1
• SNMPv2c
• SNMPv3
• MIB II, including interface extensions (RFC 1213)
• SNMP-FRAMEWORK-MIB
• SNMP-TARGET-MIB
• SNMP-NOTIFICATION-MIB
• SNMP-USM-MIB
• SNMP-VACM-MIB

System Management:

• CISCO- BULK-FILE-MIB
• CISCO-CONFIG-COPY-MIB
• CISCO-CONFIG-MAN-MIB
• CISCO-FLASH-MIB
• CISCO-MEMORY-POOL-MIB
• Cisco FTP Client MIB
• Cisco Process MIB
• Cisco Syslog MIB
• CISCO-SYSTEM-MIB
• CISCO-CDP-MIB
• IF-MIB (RFC 2233/RFC 2863)

Chassis:

• ENTITY-MIB (RFC 2737)
• CISCO-entity-asset-MIB
• CISCO-entity-sensor-MIB
• CISCO-FRU-MIB (Cisco-Entity-FRU-Control-MIB)

Fabric:

• CISCO-Fabric-HFR-MIB
• CISCO-Fabric-Mcast-MIB
• CISCO-Fabric-Mcast-Appl-MIB

Routing Protocols:

• BGP4-MIB Version 1
• OSPFv1-MIB (RFC 1253)
• CISCO-IETF-IP-FORWARDING-MIB
• IP-MIB (was RFC 2011-MIB)
• TCP-MIB (RFC 2012)
• UDP-MIB
• CISCO-HSRP-EXT-MIB
• CISCO-HSRP-MIB
• CISCO-BGP-POLICU-ACCOUNTING-MIB

Quality of Service (QoS):

• MQC-MIB (Cisco Class-Based QoS MIB)
• CISCO-PING-MIB

MPLS:

• MPLS-LDP-MIB
• MPLS-LSR-MIB
• MPLS-TE-MIB

Traps:

• RFC 1157
• Authentication
• Linkup
• Linkdown
• Coldstart
• Warmstart

Network Management

• Enhanced command-line interface (CLI)
• Extensible Markup Language (XML) interface
• XML schemas
• Craft Works Interface (CWI)
• SNMP and MIB support

Programmatic interfaces

XML Schema support

Physical Dimensions

• Weight: 8.75 lb (3.96 kg)
• Height: 20.6 in. (52.2 cm)
• Width: 1.3875. (3.524 cm)
• Depth: 11.2 in. (28.4 cm)

Power

96W

Approvals and Compliance

Table 2. Compliance and Agency Approvals

Feature/Agency

Description

Safety Standards

• UL/CSA/IEC/EN 60950-1
• IEC/EN 60825 laser safety
• ACA TS001
• AS/NZS 60950
• FDA - Code of Federal Regulations laser safety

EMI

• FCC Class A
• ICES 003 Class A
• AS/NZS 3548 Class A
• CISPR 22 (EN55022) Class A
• VCCI Class A
• BSMI Class A
• IEC/EN 61000-3-2: Power Line Harmonics
• IEC/EN 61000-3-3: Voltage Fluctuations and Flicker

Immunity (Basic Standards)

• IEC/EN-61000-4-2: Electrostatic Discharge Immunity (8-kV Contact, 15-kV Air)
• IEC/EN-61000-4-3: Radiated Immunity (10 V/m)
• IEC/EN-61000-4-4: Electrical Fast Transient Immunity (2-kV Power, 1-kV Signal)
• IEC/EN-61000-4-5: Surge AC Port (4-kV CM, 2-kV DM)
• IEC/EN-61000-4-5: Signal Ports (1 kV)
• IEC/EN-61000-4-5: Surge DC Port (1 kV)
• IEC/EN-61000-4-6: Immunity to Conducted Disturbances (10 Vrms)
• IEC/EN-61000-4-8: Power Frequency Magnetic Field Immunity (30A/m)
• IEC/EN-61000-4-11: Voltage DIPS, Short Interruptions, and Voltage Variations

ETSI and EN

• EN300 386: Telecommunications Network Equipment (EMC)
• EN55022: Information Technology Equipment (Emissions)
• EN55024: Information Technology Equipment (Immunity)
• EN50082-1/EN-61000-6-1: Generic Immunity Standard

Network Equipment Building Standards (NEBS)

This product is designed to meet the following requirements (qualification in progress):

• SR-3580: NEBS Criteria Levels (Level 3)
• GR-1089-CORE: NEBS EMC and Safety
• GR-63-CORE: NEBS Physical Protection

Ordering Information

To place an order (refer to Table 3), visit: Cisco Ordering Home Page.

Table 3. Ordering Information

Product Part Number

Product Name

GLC-LH-SM(=)

Cisco Gigabit Ethernet SFP LC connector LX/LH transceiver; GLC-LH-SM

GLC-LH-SMD(=)

Cisco Gigabit Ethernet SFP LC connector LX/LH transceiver; with DOM

CRS-8-RP(=)

Cisco CRS-1 8-Slot Line-Card Chassis Route Processor

CRS-8-RP/R

Cisco CRS-1 8 Slot Line Card Chassis Redundant Route Processor

End-of-Sale and End-of-Life Announcement for the Select Cisco Gigabit Ethernet SFP Modules: http://www.cisco.com/en/US/prod/collateral/modules/ps5455/eol_c51-698060.html
To download Cisco IOS ® Software, visit: Cisco Software Center.

Service and Support

Cisco Systems ® offers numerous innovative services programs to accelerate customer success. These programs are delivered through a unique combination of people, processes, tools, and partners, resulting in high levels of customer satisfaction. Cisco services help you protect your network investment, optimize network operations, and prepare your network for new applications to extend network intelligence and the power of your business. For more information about Cisco services, visit: Cisco Technical Support Services or Cisco Advanced Services.

For More Information

For more information about the 8-slot route processor for the Cisco CRS-1, contact your local Cisco account representative or visit Cisco at: http://www.cisco.com /go/crs.