Guest

Cisco Carrier Routing System

Cisco CRS-3 1-Port 100 Gigabit Ethernet Interface Module

  • Viewing Options

  • PDF (355.0 KB)
  • Feedback

The Cisco® CRS-3 Carrier Routing System offers industry-leading performance, advanced services intelligence, environmentally conscious design, and system longevity. The Cisco CRS-3 is powered by the Cisco QuantumFlow Array – a chipset architecture based on multidimensional engineering and Cisco IOS® XR Software, a unique self-healing, distributed operating system.

Packet-based data communications are being replaced by video and rich media traversing the IP Next-Generation Network (NGN) in multiple directions, straining the architectural foundations of both public and private networks serving businesses and consumers. As part of the medianet, a media-aware Cisco IP NGN, the Cisco CRS-3 delivers continuous, always-on operations and scales easily from numerous single-chassis form factors to a massive multi-chassis system. Its design provides an industry-leading efficiency consuming lowest power, cooling and rack-space resources for an intelligent service-rich bandwidth capacity. The CRS-3 builds on the CRS-1 being backward and forward compatible, protecting existing and future investments for decades to come.

This data sheet provides detailed product specifications for the Cisco CRS-3 1-Port 100 Gigabit Ethernet Interface Module (product number 1X100GBE). For more information about the Cisco CRS Family or about other available interfaces, visit: http://www.cisco.com/go/crs.

Figure 1.      Cisco CRS-3 1-Port 100 Gigabit Ethernet Interface Module

 


Product Specifications

Table 1 gives specifications of the Cisco CRS-3 1 port 100 Gigabit Ethernet Interface Module.

Table 1.       Product Specifications

Feature

Description

Chassis compatibility

  Compatible with all current Cisco CRS-3 line-card chassis
  Compatible with all current Cisco CRS-1 line-card chassis with 140G fabric cards
  Requires Cisco 140G Modular Services Card or 140G Forwarding Processor Card for operation

Software compatibility

Cisco IOS XR Software Release 4.0.0 or later

Port density

One port of 100 Gigabit Ethernet per PLIM slot

Ethernet

  IEEE 802.3ba compliant
  100GE PHY Monitoring
  Encapsulations: ARPA, IEEE 802.2/SAP, IEEE 802.3/SNAP
  IEEE 802.x flow control
  802.1q VLAN support, jumbo frames
  IEEE 802.1p tagging
  Source/destination MAC accounting and VLAN accounting
  Full-duplex operation
  802.1Q VLAN termination
  Per-port byte and packet counters for policy drops; oversubscription drops; cyclic redundancy check (CRC) error drops; packet sizes; and unicast, multicast, and broadcast packets
  Per-VLAN byte and packet counters for policy drops; oversubscription drops; and unicast, multicast, and broadcast packets
  Per-port byte counters for good bytes and dropped bytes

Performance

  100-Gbps line-rate throughput
  Maximum number of IM per chassis: 4 slot (4), 8 slot (8), 16 slot (16)

Reliability and availability

  Line-card online insertion and removal (OIR) support without system impact.

Network management

  Cisco IOS XR Software command-line interface (CLI)
  Simple Network Management Protocol (SNMP)
  Extensible Markup Language (XML) interface
  CraftWorks Interface (CWI)
  Cisco Active Network Abstraction (ANA)

Physical dimensions

  Occupies one-half slot on a Cisco CRS-3 and CRS-1 chassis
  Weight: 7.17 lbs (3.24 kg)
  Height: 20.6 in. (52.2 cm)
  Depth: 11.2 in. (28.4 cm)
  Width: 1.8 in. (4.49 cm)

Power

150 Watts

Environmental conditions

  Storage temperature: –40 to 70°C (–40 to 158°F)
  Operating temperature:
   Normal: 5 to 40°C (41 to 104°F)
   Short-term: –5 to 50°C (23 to 122°F)
  Relative humidity:
   Normal: 5 to 85%
   Short-term: 5 to 90% but not to exceed 0.024 kg water/kg of dry air

Short-term refers to a period of not more than 96 consecutive hours and a total of not more than 15 days in 1 year. (This refers to a total of 360 hours in any given year, but no more than 15 occurrences during that 1-year period.)

 


Approvals and Compliance

Table 2 gives standards compliance information for the Cisco CRS-3 1-Port 100 Gigabit Ethernet Interface Module.

Table 2.       Compliance and Agency Approvals

Feature

Description

Safety Standards

  UL/CSA/IEC/EN 60950-1
  AS/NZS 60950.1
  IEC/EN 60825 Laser Safety
  FDA—Code of Federal Regulations Laser Safety

EMI

  FCC Class A
  ICES 003 Class A
  AS/NZS CISPR 22 Class A
  CISPR 22 (EN55022) Class A
  VCCI Class A
  IEC/EN 61000-3-2: Power Line Harmonics
  IEC/EN 61000-3-3: Voltage Fluctuations and Flicker

Immunity (Basic Standards)

  IEC/EN-61000-4-2: Electrostatic Discharge Immunity (8-kV contact, 15-kV air)
  IEC/EN-61000-4-3: Radiated Immunity (10V/m)
  IEC/EN-61000-4-4: Electrical Fast Transient Immunity (2-kV power, 1-kV signal)
  IEC/EN-61000-4-5: Surge AC Port (4-kV CM, 2-kV DM)
  IEC/EN-61000-4-5: Signal Ports (1 kV)
  IEC/EN-61000-4-5: Surge DC Port (1 kV)
  IEC/EN-61000-4-6: Immunity to Conducted Disturbances (10 Vrms)
IEC/EN-61000-4-8: Power Frequency Magnetic Field Immunity (30A/m)
  IEC/EN-61000-4-11: Voltage Dips, Short Interruptions, and Voltage Variations

ETSI and EN

  EN300 386: Telecommunications Network Equipment (EMC)
EN55022: Information Technology Equipment (Emissions)
EN55024: Information Technology Equipment (Immunity)
  EN50082-1/EN-61000-6-1: Generic Immunity Standard

Network Equipment Building

Standards (NEBS)

This product is designed to meet the following requirements (qualification in progress):

  SR-3580: NEBS Criteria Levels (Level 3)
  GR-1089-CORE: NEBS EMC and Safety
  GR-63-CORE: NEBS Physical Protection

Additional Specifications

Table 3.       Additional Specifications

100 Gigabit Ethernet CFP Optics

Maximum Distance

100 Gigabit Ethernet long-reach over 4 WDM Lanes (LR4) Optics (single-mode fiber)

6.2 mi (10 km)

Ordering Information

To place an order, contact your local Cisco representative or visit the Cisco Ordering Home Page. Use the ordering information in Table 4.

Table 4.       Ordering Information

Product Part Number

Product Name

1X100GBE

Cisco CRS-3 1-port 100 Gigabit Ethernet Interface Module

CFP-100G-LR4

Cisco 100 Gigabit Ethernet LR4 (10 km) Optics

 


Cisco Services

Cisco Services make networks, applications, and the people who use them work better together.

Today, the network is a strategic platform in a world that demands better integration between people, information, and ideas. The network works better when services, together with products, create solutions aligned with business needs and opportunities.

The unique Cisco Lifecycle approach to services defines the requisite activities at each phase of the network lifecycle to help ensure service excellence. With a collaborative delivery methodology that joins the forces of Cisco, our skilled network of partners, and our customers, we achieve the best results.

For More Information

For more information about the Cisco CRS-3 1-Port 100 Gigabit Ethernet Interface Module, contact your local Cisco representative or visit: http://www.cisco.com/go/crs.