Guest

Cisco 1800 Series Integrated Services Routers

End-of-Sale and End-of-Life Announcement for the Selected Cisco 1800 Series Fixed Wireless Routers and HWIC Access Point (ETSI Compliant)

  • Viewing Options

  • PDF (105.5 KB)
  • Feedback

EOL6784 - Amended

Cisco announces the end-of-sale and end-of life dates for the Selected Cisco 1800 Series Fixed Wireless Routers and HWIC Access Point (ETSI Compliant). The last day to order the affected product(s) is April 1, 2009. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available until the termination date of the contract, even if this date exceeds the Last Date of Support shown in Table 1.

Table 1. End-of-Life Milestones and Dates for the Selected Cisco 1800 Series Fixed Wireless Routers and HWIC Access Point (ETSI Compliant)

Milestone

Definition

Date

End-of-Sale Date

The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.

April 1, 2009

End of SW Maintenance Releases Date: HW

The last date that Cisco Engineering may release any final software maintenance releases or bug fixes. After this date, Cisco Engineering will no longer develop, repair, maintain, or test the product software.

April 1, 2010

End of Routine Failure Analysis Date: HW

The last-possible date a routine failure analysis may be performed to determine the cause of product failure or defect.

November 13, 2010

End of New Service Attachment Date: HW

For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.

November 13, 2010

End of Service Contract Renewal Date: HW

The last date to extend or renew a service contract for the product.

February 8, 2014

Last Date of Support: HW

The last date to receive service and support for the product. After this date, all support services for the product are unavailable, and the product becomes obsolete.

November 12, 2014


HW = Hardware OS SW = Operating System Software App. SW = Application Software

Table 2. Product Part Numbers Affected by This Announcement

End-of-Sale Product Part Number

Product Description

Replacement Product Part Number

Replacement Product Description

Additional Information

CISCO1801W-AG-E/K9

ADSL/POTS Router with 802.11a+g ETSI Compliant and Security

AIR-AP1131AG-E-K9

802.11a, .11g AP, Int Radios, Ants, ETSI Cnfg

--

CISCO1801W-AG-E/K9

ADSL/POTS Router with 802.11a+g ETSI Compliant and Security

CISCO1801/K9

ADSL/POTS Router with Firewall/IDS and IPSEC 3DES

--

CISCO1801WM-AGE/K9

ADSL over POTs, Annex M Wireless Security Router

AIR-AP1131AG-E-K9

802.11a, .11g AP, Int Radios, Ants, ETSI Cnfg

--

CISCO1801WM-AGE/K9

ADSL over POTs, Annex M Wireless Security Router

CISCO1801-M/K9

CISCO1801 Security Router with Annex M

--

CISCO1802W-AG-E/K9

ADSL/ISDN Router with 802.11a+g ETSI Compliant and Security

AIR-AP1131AG-E-K9

802.11a, .11g AP, Int Radios, Ants, ETSI Cnfg

--

CISCO1802W-AG-E/K9

ADSL/ISDN Router with 802.11a+g ETSI Compliant and Security

CISCO1802/K9

ADSL/ISDN Router with Firewall/IDS and IPSEC 3DES

--

CISCO1803W-AG-E/K9

G.SHDSL Router with 802.11a+g ETSI Compliant and Security

CISCO888GW-GN-E-K9

Cisco 888 G.SHDSL Sec Router w/ 3G B/U 802.11n ETSI Comp

--

CISCO1803W-AG-E/K9

G.SHDSL Router with 802.11a+g ETSI Compliant and Security

CISCO888W-GN-E-K9

Cisco888 G.SHDSL Sec Router ISDN B/U 802.11n ETSI Comp

--

CISCO1812W-AG-E/K9

Security Router with 802.11a+g ETSI Compliant and ISDN S/T

CISCO892W-AGN-E-K9

Cisco 892 GigaE SecRouter w/ 802.11n a/b/g ETSI Comp

--

HWIC-AP-AG-E

AP HWIC, 2 radios( 2.4/5Ghz Radios for 802.11 a/b/g) Europe

AIR-AP1131AG-E-K9

802.11a, .11g AP, Int Radios, Ants, ETSI Cnfg

--

HWIC-AP-AG-E=

AP HWIC, 2 radios( 2.4/5Ghz Radios for 802.11 a/b/g) Europe

AIR-AP1131AG-E-K9

802.11a, .11g AP, Int Radios, Ants, ETSI Cnfg

--

Product Migration Options

Table 2 lists the wireless dual radio routers (802.11 a/g) that no longer meet new European-market requirements.
For the Cisco 1800 Series Integrated Services Router with product identification number (CISCO1801W-AG-E/K9/ CISCO1801WM-AGE/K9/ CISCO1802W-AG-E/K9), customers are encouraged to migrate to the Cisco routers (CISCO1801/K9/ CISCO1801-M/K9/ CISCO1802/K9) respectively plus the stand alone wireless access point AIR-AP1131AG-E-K9. Information about the products can be found at: http://www.cisco.com/en/US/products/ps5853/index.html and http://www.cisco.com/en/US/products/ps6087/
For the Cisco 1800 Series Integrated Services Router with product identification number CISCO1803W-AG-E/K9, customers are encouraged to migrate to the Cisco 888 Wireless Integrated Services Router (PID CISCO888GW-GN-E-K9 or CISCO888W-GN-E-K9). Information about this product can be found at: http://www.cisco.com/en/US/products/ps9566/index.html
For the Cisco 1800 Series Integrated Services Router with product identification number CISCO1812W-AG-E/K9, customers are encouraged to migrate to the Cisco 892W Integrated Services Router (PID CISCO892W-AGN-E-K9). Information about this product can be found at: http://www.cisco.com/en/US/prod/collateral/routers/ps380/data_sheet_c78-519930.html.
Customers can use the Cisco Technology Migration Plan (TMP) to trade in products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, go to: http://www.cisco.com/go/tradein/. The Cisco TMP application requires all users to have a Cisco.com user ID.
Customers may be able to continue to purchase the Selected Cisco 1800 Series Fixed Wireless Routers and HWIC Access Point (ETSI Compliant) through the Cisco Certified Refurbished Equipment program. Refurbished units may be available in limited supply for sale in certain countries on a first-come, first-served basis until the Last Date of Support has been reached. For information about the Cisco Certified Refurbished Equipment program, go to: www.cisco.com/go/eos
Service prices for Cisco products are subject to change after the product End of Sale date.

For More Information

For more information about the Cisco End-of-Life Policy, go to:
http://www.cisco.com/en/US/products/prod_end_of_life.html
To subscribe to receive end-of-life/end-of-sale information, go to:
http://www.cisco.com/cgi-bin/Support/FieldNoticeTool/field-notice