Guest

Cisco AnyConnect Secure Mobility Client

Cisco Video Surveillance 8-Port Encoder Data Sheet

  • Viewing Options

  • PDF (285.1 KB)
  • Feedback

Product Overview

Cisco® Video Surveillance Encoders are standalone devices that can be used to convert analog video sources into digital formats so they can be integrated into a networked, IP-based video surveillance system. The 8-port model (CIVS-SENC-8P) supports eight analog video inputs and can be stacked, wall mounted, or rack-mounted. A power supply is included.

Figure 1. Cisco Video Surveillance 8-Port Encoder

Protocols Supported

The 8-port encoder supports a single video stream per port. The stream can be compressed in H.264, MPEG-4, or MJPEG formats and can be configured with different resolutions, frame rates, and bit rates.

PTZ Interface

The encoder provides an RS-485 interface to allow for connection to PTZ control units supporting the Pelco-D protocol, in order to control PTZ functions in an external camera or PTZ mount.

Digital Inputs/ Outputs

The encoder has eight digital outputs and eight digital inputs to connect to and from external sensors.

Web Interface

The encoders support Internet Explorer® 8.0 for remote setup and administration.

Video Management

The encoder connects to Cisco Video Surveillance Manager Version 6.3.2 and later.

Product Specifications

Features and Benefits

Features include the following:

Up to D1 resolution per port

Up to 30 frames per second (FPS) at D1 resolution (180 FPS maximum across all ports/channels)

H.264, MPEG-4, and MJPEG compression options

Up to five privacy mask windows per port

Up to three motion detection windows per port

Table 1 lists product specifications for the Cisco Video Surveillance 8-Port Encoder.

Table 1. Product Specifications

General

Analog Video Input Ports

8

Digital Alarm Inputs

8 (maximum voltage 12V; maximum sync 100mA)

Digital Alarm Outputs

8

Security

Password-protected administrative interface;
HTTPS access to the administrative interface

Certifications/Ratings/Patents

CE, FCC Class B, C-Tick
UL/cUL listed

Electrical

Port

RJ-45 connector for 100/1000 BASE-TX
Auto MDI/MDI-X

Cable Type

Cat5 or better

Power Input

12 VDC/24 VAC (power supply included)

Power Consumption

24W (max)

Environmental

Operational Temperature

50 to 122F (10 to 50C)

Operational Humidity

20% to 80%, noncondensing

Physical

Dimensions (LxWxH)

189 x 153 x 49.3 mm

Weight

837g

Video & Audio

Video Encoding

H.264, MPEG-4, and MJPEG (for both PAL and NTSC)

Video Streams

Single stream per port

Audio In

RCA connector
G.711 audio encoding (64 Kbps)
μ-Law or A-Law mode selectable
Audio input (up to 1V RMS)
Supports two-way audio (per channel)
Supports audio mute

Audio Out

Terminal block x 8
Supports two-way audio (per channel)
Mono output

PTZ Serial Interface

RS-485 Half-Duplex, supporting Pelco-D protocol


Available Resolutions

The following are definitions of resolutions used in the table.

D1: 720 x 480 (NTSC), 720 x 576 (PAL)

4CIF: 704 x 480 (NTSC), 704 x 576 (PAL)

CIF: 352 x 240 (NTSC), 352 x 288 (PAL)

Table 2 lists the supported video stream configurations on the Cisco Video Surveillance 8 Port Encoder.

Table 2. Stream Configurations

Stream

Maximum resolution

Maximum frame rate (fps), bit rate (Kbps), or quality/intra-frame period (S)

H.264

D1

30 fps
2000 Kbps
1S

MPEG-4

D1

30 fps
2000 Kbps
1S

MJPEG

D1

30 fps
Good

Table 3 shows the minimum PC client requirements.

Table 3. Minimum PC Client Requirements

Processor

Intel® Core® 2 Duo microprocessor, 2.6 GHz

Operating System

Microsoft® Windows® 7

Memory

2 GB RAM

Network Interface Card

100 megabits (or greater)

Monitor

Minimum of 1024 x 768 resolution, 16- or 32-bit pixel color resolution

Browser

Internet Explorer® 8.0, QuickTime 6.5 and later

Warranty Information

Find warranty information on Cisco.com at the Product Warranties page.

Ordering Information

Availability

The Cisco Video Surveillance 8-Port Encoder is available through Cisco Advanced Technology Provider (ATP) program partners. Table 4 lists ordering information.

Table 4. Ordering Information

Product Name

Part Number

Cisco Video Surveillance 8-Port Encoder (standalone)

CIVS-SENC-8P


Cisco Services

Cisco offers a wide range of services programs to accelerate customer success. These innovative programs are delivered through a unique combination of people, processes, tools, and partners, resulting in high levels of customer satisfaction. Cisco services help you to protect your network investment, optimize network operations and prepare your network for new applications to extend network intelligence and the power of your business. For more information about Cisco Services, see Cisco Technical Support Services or Cisco Advanced Services.

For More Information

For more information about the Cisco Video Surveillance Encoder products, visit http://www.cisco.com or contact your local account representative.Text Box: Printed in USA	C78-710149-00	06/12