Guest

Cisco TelePresence System Edge MXP Series

End-of-Sale and End-of-Life Announcement for the Cisco TelePresence System Edge 75/95 MXP

  • Viewing Options

  • PDF (132.3 KB)
  • Feedback

EOL8856 - Amended

Cisco announces the end-of-sale and end-of-life dates for the Cisco TelePresence System Edge 75/95 MXP. The last day to order the affected product(s) is May 14, 2013. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available under the terms and conditions of customers' service contract.

Table 1. End-of-Life Milestones and Dates for the Cisco TelePresence System Edge 75/95 MXP

Milestone

Definition

Date

End-of-Life Announcement Date

The date the document that announces the end-of-sale and end-of-life of a product is distributed to the general public.

November 13, 2012

End-of-Sale Date

The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.

May 14, 2013

Last Ship Date:
HW

The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.

August 12, 2013

End of SW Maintenance Releases Date:
HW

The last date that Cisco Engineering may release any final software maintenance releases or bug fixes. After this date, Cisco Engineering will no longer develop, repair, maintain, or test the product software.

May 14, 2014

End of Routine Failure Analysis Date:
HW

The last-possible date a routine failure analysis may be performed to determine the cause of hardware product failure or defect.

May 14, 2014

End of New Service Attachment Date:
HW

For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.

May 14, 2014

End of Service Contract Renewal Date:
HW

The last date to extend or renew a service contract for the product.

August 9, 2017

Last Date of Support:
HW

The last date to receive applicable service and support for the product as entitled by active service contracts or by warranty terms and conditions. After this date, all support services for the product are unavailable, and the product becomes obsolete.

May 31, 2018

HW = Hardware OS SW = Operating System Software App. SW = Application Software

Table 2. Product Part Numbers Affected by This Announcement

End-of-Sale Product Part Number

Product Description

Replacement Product Part Number

Replacement Product Description

Additional Information

BRKT-EDG-WMK=

Bracket Wallmount for the Edge

There is currently no replacement product available for this product.

-

-

CAB-P3000-PHD-1M=

HD Camera Cable 1meter

There is currently no replacement product available for this product.

-

-

CAB-P3000-PHD-2M=

HD Camera Cable 2m

There is currently no replacement product available for this product.

-

-

CAB-P3000-PHD-5M=

HD Camera Cable 3000 5m

There is currently no replacement product available for this product.

-

-

CAB-P6000-PHD-1M=

HD Camera Cable 1meter

There is currently no replacement product available for this product.

-

-

CAB-P6000-PHD-2M=

HD Camera cable 6000, 2m

There is currently no replacement product available for this product.

-

-

CAB-P6000-PHD-5M=

PRECISIONHD TO C6000 CAMERA CABLE, 5M

There is currently no replacement product available for this product.

-

-

CAB-PHD-EXTR=

MXP PHDCam Extension Cable w/repeater -6.5m-PSU not included

There is currently no replacement product available for this product.

-

-

CAB-PHD-KIT=

MXP PHDCamCable Kit-3 ext.cables/repeaters, PSU, 19.5m total

There is currently no replacement product available for this product.

-

-

CTS-EDGE75-K9

Edge75MXP Incl mic, NPP, 128 kbps ISDN/768 kbps IP, PHD Cam

CTS-SX20-PHD12X-K9

SX20 Quick Set HD, NPP, 12xPHDCam, 1 mic, remote cntrl

-

CTS-EDGE75-K9

Edge75MXP Incl mic, NPP, 128 kbps ISDN/768 kbps IP, PHD Cam

CTS-SX20-PHD4X-K9

SX20 Quick Set HD, NPP, 4x PHDCam, 1 mic, remote cntrl

-

CTS-EDGE75-K9=

Edge 75 Spare

There is currently no replacement product available for this product.

-

-

CTS-EDGE75-WP-K9

Edge 75 MXP - PAL, Encrypted, NPP, PrecisionHD Cam

There is currently no replacement product available for this product.

-

-

CTS-EDGE85-BW1

NOT USED

There is currently no replacement product available for this product.

-

-

CTS-EDGE85-BW1=

Edge 85 MXP IP only to 384 kbps ISDN/1.1 Mbps IP

There is currently no replacement product available for this product.

-

-

CTS-EDGE95-BW1

NOT USED

There is currently no replacement product available for this product.

-

-

CTS-EDGE95-BW1=

Edge 95 MXP IP only to 512 kbps ISDN/2 Mbps IP

There is currently no replacement product available for this product.

-

-

CTS-EDGE95-K9

Edge95MXP w/ 1 mic, NPP, MS, 512kbps ISDN 2 Mbps IP, PHDCam

CTS-SX20-PHD12X-K9

SX20 Quick Set HD, NPP, 12xPHDCam, 1 mic, remote cntrl

-

CTS-EDGE95-K9

Edge95MXP w/ 1 mic, NPP, MS, 512kbps ISDN 2 Mbps IP, PHDCam

CTS-SX20-PHD4X-K9

SX20 Quick Set HD, NPP, 4x PHDCam, 1 mic, remote cntrl

-

CTS-EDGE95-K9=

Edge 95 MXP Spare

There is currently no replacement product available for this product.

-

-

CTS-EDGE95-WP-K9

Edge 95 MXP - PAL, Encrypted, NPP, MS, PrecisionHD Cam

There is currently no replacement product available for this product.

-

-

CTS-EDGEXX-K9

Edge Series Codec

There is currently no replacement product available for this product.

-

-

CTS-EDGEXX-K9-

EdgeXX MXP Unit - Buried Option

There is currently no replacement product available for this product.

-

-

CTS-EDGEXX-K9=

Spare CTS-EDGEXX-K9=

There is currently no replacement product available for this product.

-

-

CTS-EDGEXX-UPGKIT

Wall Mount Kit/Cables/Adapters

There is currently no replacement product available for this product.

-

-

CTS-EDGEXX-UPGKIT=

Wall Mount Kit w/brackets, cables, adapters

There is currently no replacement product available for this product.

-

-

CTS-EDGEXX=

EDGE Series CODEC Non Encrypted Version Spare

There is currently no replacement product available for this product.

-

-

CTS-NTSC

NTSC Option

There is currently no replacement product available for this product.

-

-

CTS-PAL

PAL Option

There is currently no replacement product available for this product.

-

-

CTS-PAL=

PAL Option

There is currently no replacement product available for this product.

-

-

CTS-PHD

PrecisionHD Camera, 2m cable - Codec SN Req

There is currently no replacement product available for this product.

-

-

CTS-PHD-S

PrecisionHD Camera w/ 2mcable, codec S/N Req

There is currently no replacement product available for this product.

-

-

CTS-PHD-S=

Precision HD Camera Silver

There is currently no replacement product available for this product.

-

-

CTS-PHD=

PrecisionHD Camera, 2m cable - Codec SN Req

There is currently no replacement product available for this product.

-

-

CTS-RMT-TRC4

Remote Control IV

There is currently no replacement product available for this product.

-

-

CTS-RMT-TRC4=

Remote Control IV

There is currently no replacement product available for this product.

-

-

L-95-85-MS

Order L-MXP-PAK for E-delivery of Edg95/85MXP NPP Upgrde to MS

There is currently no replacement product available for this product.

-

-

L-95-85-NPP

Order L-MXP-PAK for E-deliveryof Edg 95/85MXP STANDARD to NPP

There is currently no replacement product available for this product.

-

-

L-EDG75-BW1

Order L-MXP-PAK for E-delivryEdg75MXPIP128kbpsISDN/768kbps IP

There is currently no replacement product available for this product.

-

-

L-EDG75-BW2

Order L-MXP-PAK for 512kbps ISDN/2Mbps IP - No MS

There is currently no replacement product available for this product.

-

-

L-EDG75-NPP

Order L-MXP-PAK for E-delivery of Edg75 MXP STANDARD to NPP

There is currently no replacement product available for this product.

-

-

L-EDG85TO95

Order L-MXP-PAK for E-delivery of Edge 85 MXP to Edge 95 MXP

There is currently no replacement product available for this product.

-

-

L-EDG95-BW1

Order L-MXP-PAK for E-delivery of 512 kbps ISDN/2 Mbps IP

There is currently no replacement product available for this product.

-

-

LIC-EDG75

Edge 75MXP product id

There is currently no replacement product available for this product.

-

-

LIC-EDG75-BW1

Edge 75 MXP 128 kbps ISDN/768 kbps IP Option

There is currently no replacement product available for this product.

-

-

LIC-EDG75-BW2

512kbps ISDN/2Mbps IP - No MS

There is currently no replacement product available for this product.

-

-

LIC-EDG75-NPP

Edge 75 MXP Natural Presenter Package (NPP) Option

There is currently no replacement product available for this product.

-

-

LIC-EDG95

Edge 95MXP Product ID License

There is currently no replacement product available for this product.

-

-

LIC-EDG95-BW1

Edge 95 MXP IP only to 512 kbps ISDN/2 Mbps IP

There is currently no replacement product available for this product.

-

-

LIC-EDG95-MS

Edge 95 MXP MultiSite (MS) Option (Requires NPP)

There is currently no replacement product available for this product.

-

-

LIC-EDG95-NPP

Edge 95 MXP Natural Presenter Package (NPP) Option

There is currently no replacement product available for this product.

-

-

PHD-KIT

Precision HD Camera Option Kit

There is currently no replacement product available for this product.

-

-

PHD-KIT=

Upgrade Kit -Wave Cam on an integrated system to PHD Camera

There is currently no replacement product available for this product.

-

-

Product Migration Options

Customers using IP are encouraged to migrate to the Cisco TelePresence SX20 Quick Set. Customers using ISDN are encouraged to migrate to Cisco TelePresence SX20 Quick Set and Cisco TelePresence ISDN Link. Information about these products can be found at http://www.cisco.com/en/US/products/ps12153/index.html and http://www.cisco.com/en/US/products/ps12504/index.html.
Customers may be able to use the Cisco Technology Migration Program (TMP) where applicable to trade-in eligible products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, customers should work with their Cisco Partner or Cisco account team. Cisco Partners can find additional TMP information on Partner Central at http://www.cisco.com/web/partners/incentives_and_promotions/tmp.html.
Customers may be able to continue to purchase the Cisco TelePresence System Edge 75/95 MXP through the Cisco Certified Refurbished Equipment program. Refurbished units may be available in limited supply for sale in certain countries on a first-come, first-served basis until the Last Date of Support has been reached. For information about the Cisco Certified Refurbished Equipment program, go to: http://www.cisco.com/go/eos.
Service prices for Cisco products are subject to change after the product End-of-Sale date.
The Cisco Takeback and Recycle program helps businesses dispose properly of surplus products that have reached their end of useful life. The program is open to all business users of Cisco equipment and its associated brands and subsidiaries. For more information, go to: http://www.cisco.com/web/about/ac227/ac228/ac231/about_cisco_takeback_recycling.html

For More Information

For more information about the Cisco TelePresence SX20 Quick Set and Cisco TelePresence ISDN Link, visit http://www.cisco.com/en/US/products/ps12153/index.html, or contact your local account representative.
For more information about the Cisco End-of-Life Policy, go to: http://www.cisco.com/en/US/products/products_end-of-life_policy.html.
For more information about the Cisco Product Warranties, go to: http://www.cisco.com/en/US/products/prod_warranties_listing.html.
To subscribe to receive end-of-life/end-of-sale information, go to: http://www.cisco.com/cisco/support/notifications.html.

Subscribe for RSS Notifications for End-of-Life and End-of-Sale Notices

To subscribe to the End-of-Life and End-of-Sale RSS Feed, insert the following URL into your RSS application: http://www.cisco.com/web/feeds/products/end_of_life_rss.xml.
Any authorized translation issued by Cisco Systems or affiliates of this end-of-life Product Bulletin is intended to help customers understand the content described in the English version. This translation is the result of a commercially reasonable effort; however, if there are discrepancies between the English version and the translated document, please refer to the English version, which is considered authoritative.