Guest

Tandberg 7000 MXP Dual

End-of-Sale and End-of-Life Announcement for the Tandberg 7000 MXP Dual

  • Viewing Options

  • PDF (135.0 KB)
  • Feedback

EOL7839 - Amended

Cisco announces the end-of-sale and end-of-life dates for the Tandberg 7000 MXP Dual. The last day to order the affected product(s) is July 1, 2006. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available until the termination date of the contract, even if this date exceeds the Last Date of Support shown in Table 1.

Table 1. End-of-Life Milestones and Dates for the Tandberg 7000 MXP Dual

Milestone

Definition

Date

End-of-Life Announcement Date

The date the document that announces the end-of-sale and end-of-life of a product is distributed to the general public.

December 31, 2005

End-of-Sale Date

The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.

July 1, 2006

Last Ship Date:
HW

The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.

September 29, 2006

End of Routine Failure Analysis Date:
HW

The last-possible date a routine failure analysis may be performed to determine the cause of hardware product failure or defect.

July 1, 2007

End of New Service Attachment Date:
HW

For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.

July 1, 2007

End of Service Contract Renewal Date:
HW

The last date to extend or renew a service contract for the product.

September 26, 2010

Last Date of Support:
HW

The last date to receive applicable service and support for the product as entitled by active service contracts or by warranty terms and conditions. After this date, all support services for the product are unavailable, and the product becomes obsolete.

June 30, 2011

HW = Hardware OS SW = Operating System Software App. SW = Application Software

Table 2. Product Part Numbers Affected by This Announcement

End-of-Sale Product Part Number

Product Description

Replacement Product Part Number

Replacement Product Description

Additional Information

CTS-7000-114870N

114870N TANDBERG T7000 MXP - Dual 30

CTS-P52MXP-K9

Profile 52 w 6000 MXP - PHD cam 7x, Rmt Cntrl, 3 Mics

-

CTS-7000-114870P

114870P TANDBERG T7000 MXP - Dual 30

CTS-P52MXP-K9

Profile 52 w 6000 MXP - PHD cam 7x, Rmt Cntrl, 3 Mics

-

CTS-CAB-112604

112604 Audio cable phono-phono 2m

There is currently no replacement product available for this product.

-

-

CTS-CAB-113848

113848 VGA-DVI cable DVI Out, single 1.5m

See Product Migration Options section for details.

CAB-VGA-DVI-A=

-

CTS-CAB-113849

113849 VGA-DVI cable DVI Out, Dual 1.5m

See Product Migration Options section for details.

CAB-VGA-DVI-A=

-

CTS-SHARP-112622

112622 LCD 30 inch Sharp 16:9

CTS-P52MXP-K9

Profile 52 w 6000 MXP - PHD cam 7x, Rmt Cntrl, 3 Mics

-

CTS-T7000-113640N

113640N T7000 MXP - Dual 30 w/NPP, MS

CTS-P52MXP-K9

Profile 52 w 6000 MXP - PHD cam 7x, Rmt Cntrl, 3 Mics

-

CTS-T7000-113640P

113640P T7000 MXP - Dual 30 w/NPP, MS

CTS-P52MXP-K9

Profile 52 w 6000 MXP - PHD cam 7x, Rmt Cntrl, 3 Mics

-

Product Migration Options

Customers are encouraged to migrate to the Cisco TelePresence System Profile 52-inch Dual MXP. Information about this product can be found at: http://www.cisco.com/en/US/products/ps11326/index.html.
Customers may be able to use the Cisco Technology Migration Program (TMP) where applicable to trade-in eligible products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, customers should work with their Cisco Partner or Cisco account team. Cisco Partners can find additional TMP information on Partner Central at http://www.cisco.com/web/partners/incentives_and_promotions/tmp.html.
Customers may be able to continue to purchase the Tandberg 7000 MXP Dual through the Cisco Certified Refurbished Equipment program. Refurbished units may be available in limited supply for sale in certain countries on a first-come, first-served basis until the Last Date of Support has been reached. For information about the Cisco Certified Refurbished Equipment program, go to: http://www.cisco.com/go/eos.
Service prices for Cisco products are subject to change after the product End-of-Sale date.
The Cisco Takeback and Recycle program helps businesses dispose properly of surplus products that have reached their end of useful life. The program is open to all business users of Cisco equipment and its associated brands and subsidiaries. For more information, go to: http://www.cisco.com/web/about/ac227/ac228/ac231/about_cisco_takeback_recycling.html.

For More Information

For more information about the Cisco TelePresence System Profile 52-inch Dual MXP, visit http://www.cisco.com/en/US/products/ps11326/index.html, or contact your local account representative.
For more information about the Cisco End-of-Life Policy, go to: http://www.cisco.com/en/US/products/products_end-of-life_policy.html.
For more information about the Cisco Product Warranties, go to: http://www.cisco.com/en/US/products/prod_warranties_listing.html.
To subscribe to receive end-of-life/end-of-sale information, go to: http://www.cisco.com/cisco/support/notifications.html.

Subscribe for RSS Notifications for End-of-Life and End-of-Sale Notices

To subscribe to the End-of-Life and End-of-Sale RSS Feed, insert the following URL into your RSS application: http://www.cisco.com/web/feeds/products/end_of_life_rss.xml.
Any authorized translation issued by Cisco Systems or affiliates of this end-of-life Product Bulletin is intended to help customers understand the content described in the English version. This translation is the result of a commercially reasonable effort; however, if there are discrepancies between the English version and the translated document, please refer to the English version, which is considered authoritative.