The 1.4(5) firmware image within
the installation program supports the Skinny Client Control Protocol (SCCP) for
the following Cisco IP Phone models:
This firmware is compatible with Cisco Unified Communications
Manager (Cisco Unified CM) releases 8.6, 8.5, 8.0, 7.1, 7.0, 6.1, and 6.0 and
Cisco Unified CallManager 5.1 and 4.3. New device enabler, cmterm-7937-1-4-5-QED.cop.sgn, should be
installed, in order to control recording tone behavior.
For a list of Resolved Problems and Known Problems
with this firmware version, you can obtain the Firmware Release Notes in
English by clicking the following URL:
http://www.cisco.com/en/US/products/hw/phones/ps379/prod_release_notes_list.html
For all phone documentation, click
the following URL:
http://software.cisco.com/download/type.html?mdfid=281433475&flowid=5271
Before using the 1.4(5) firmware for Cisco Unified IP Conference Station
7937G with Cisco Unified Communication
Manager Releases, you need install the latest firmware on all
Cisco Unified Communication
Manager servers in the cluster. Device enabler should also be updated.
The 1.4(5) firmware for the 7937G is listed below.
Table 1: Cisco IP Conference Station 7937G
Firmware Load
Cisco
IP Phone Model |
CallManager
Version |
Supported
Protocol |
Executable
on Software Page |
MD5
hash |
7937G |
5.1,
7.1.x, and above |
SCCP |
cmterm-7937-1-4-5-7-SCCP.cop.sgn |
a46ca69a1db3ed78eb3c5ef2ba7a5f41 |
7937G |
5.1,
7.1.x, and above |
Enabler/QED |
cmterm-7937-1-4-5-QED.cop.sgn |
8985bd1f449dd11ceccfed7d48a2d7e7 |
7937G |
4.3 |
SCCP |
cmterm-7937-1-4-5-7-SCCP.exe |
fb61bc49915d118e7ae0fb83de077003 |
Perform the following procedure:
Step 1 Go to the following URL: http://software.cisco.com/download/release.html?mdfid=281433475&flowid=5271&softwareid=282074289&release=1.4(5)&relind=AVAILABLE&rellifecycle=&reltype=all
Step 2 Log in to the Download Software page.
Step 3 In the Make a
selection to continue
section, Choose Products > Voice and Unified Communications > IP
telephony.
Step 4 Choose IP Phones > Cisco Unified IP Phones 7900 Series.
Step 5 Choose your phone type.
Step 6 Choose Skinny Client Control Protocol (SCCP) Software.
Step 7 Choose 1.4(5) under the Latest Releases folder.
Step 8 Download the files listed in Table 1.
For
Cisco Unified Communication Manager Release 5.1, 7.1.x, and above, you need do
all software installations and upgrades by using the Software Upgrades menu
options. The system can upload and process only software that Cisco Systems
approved.
Note: Firmware
cmterm-7937-1-4-5-7-SCCP.exe is only used to install firmware on Cisco
Unified Communication Manager Release 4.3.
The Cisco IP Conference Station 7937G
Firmware version 1.4(5) is also supplied in zip file, as an alternative in case
a Cisco Unified Communication Manager is not available to run the executable
installer program. The name of this file is: cmterm-7937-1-4-5-7-SCCP.zip.
Please refer to "downloading the Device Enabler and firmware load" for
downloading the zip files.
After unzipping the firmware files, they
should be manually copied to the appropriate directory on the TFTP server.
Copyright 2013 Cisco Systems, Inc.
All Rights Reserved