This document provides installation instructions for Unified CCE 12.5(1) ES94. It also contains a list of Unified CCE issues resolved by this engineering special. Review all installation information before installing the product. Failure to install this engineering special as described can result in inconsistent Unified CCE behavior.
This document contains these sections:
In the Product
Alert Tool, you can set up profiles to receive email notification of new
Field Notices, Product Alerts, or End of Sale information for your selected
products.
The Product
Alert Tool is available at https://www.cisco.com/cisco/support/notifications.html.
The ova for finesse 12.6.1 was changed. During upgrade from 12.5 to 12.6, finesse is upgraded first and ICM is upgraded later. When finesse is upgraded to 12.6 and ICM is still in 12.5, the VM validation in cceadmin will fail. This is because the finesse VM properties would have been changed but the validation rules in cceadmin will still have values of 12.5 finesse. This ES contains the support in 12.5 ICM for Finesse 12.6.1 changes.
12.5(1)
This section lists the Unified CCE components on which you can and cannot install this engineering special.
You can install Unified CCE 12.5(1) ES94 on these Unified CCE components:
AW
o Step 1:
In <ICM HOME>\tomcat\config\server.xml make sure the entry for
<Connector> entry for APJ protocol is as below
< Connector port="8009" protocol="AJP/1.3" redirectPort="8443" address="127.0.0.1" maxPostSize="5242880" secretRequired="false" allowedRequestAttributesPattern=".*" />.
If the highlighted entry is missing, then add the entry in server.xml.
o Step 2:
§ Download the 32 bit tomcat installer zip
from http://archive.apache.org/dist/tomcat/tomcat-9/.
Download the same version that is displayed when version.bat was run.
§ Unzip the installer to a temp folder.
§ Copy tomcat-util-scan.jar from the <temp>\apache-tomcat-9.0.xx\lib location
to <ICM HOME>\tomcat\lib.
§ Using the ICM/CCE Service Control, start Apache
Tomcat 9 service.
Note: Remove patches in the reverse order of their installation. For example, if you installed patches 3, then 5, then 10 for a product, you must uninstall patches 10, 5, and 3, in that order, to remove the patches from that product.
This section provides a list of significant Unified CCE defects resolved by this engineering special. It contains these subsections:
Note: You can view more information on and track individual Unified CCE defects using the Cisco Bug Search tool, located at: https://bst.cloudapps.cisco.com/bugsearch/search?null.
This section lists caveats specifically resolved by Unified CCE 12.5(1) ES94.
Caveats in this section are ordered by UNIFIED CCE component, severity, and
then identifier.
Identifier |
Severity |
Component |
Headline |
CSCwa30854 |
3 |
ova |
VM
validation in cceadmin will fail when ICM in 12.5
and Finesse in 12.6 |
Caveats are ordered by severity then defect number.
Defect Number: CSCwa30854
Component: ova
Severity: 3
Headline: VM validation in cceadmin will fail when ICM in 12.5 and Finesse in 12.6
$$IGNORE
Symptom: VM validation in cceadmin will fail when
ICM in 12.5 and Finesse in 12.6 1)ICM is in 12.5 2)Finesse is in 12.6 3)Run
PCCE Fresh Install wizard and check the VM Validation
Conditions: VM validation in cceadmin will fail
when ICM in 12.5 and Finesse in 12.6
Workaround: None
You can access current Cisco documentation on the Support pages at the following sites:
To provide comments about this document, send an email message to the following address:
contactcenterproducts_docfeedback@cisco.com
We appreciate your comments.
Cisco.com is a starting point for all technical assistance. Customers and partners can obtain documentation, troubleshooting tips, and sample configurations from online tools. For Cisco.com registered users, additional troubleshooting tools are available from the TAC site.
Cisco.com provides a broad range of features and services to help customers and partners streamline business processes and improve productivity. Through Cisco.com, you can find information about Cisco and our networking solutions, services, and programs. You can also resolve technical issues with online technical support and download software packages. Valuable online skill assessment, training, and certification programs are also available.
Customers and partners can self-register on Cisco.com to obtain additional personalized information and services. Registered users can order products, check on the status of an order, access technical support, and view benefits specific to their relationships with Cisco.
The Cisco TAC site is available to all customers who need technical assistance with a Cisco product or technology that is under warranty or covered by a maintenance contract.
If you have a priority level 3 (P3) or priority level 4 (P4) problem, contact TAC by going to https://www.cisco.com/c/en/us/support/index.html.
P3 and P4 level problems are defined as follows:
In each of the above cases, use the Cisco TAC site to quickly find answers to your questions.
If you cannot resolve your technical issue by using the TAC online resources, Cisco.com registered users can open a case online by using the TAC Case Open tool at the following site: https://mycase.cloudapps.cisco.com/create/start/
If you have a priority level 1(P1) or priority level 2 (P2) problem, contact TAC by telephone and immediately open a case. To obtain a directory of toll-free numbers for your country, go to the following sites:
P1 and P2 level problems are defined as follows: