This document provides installation instructions for Unified CCE 12.5(1)
ES69. It also contains a list of Unified CCE issues resolved by this
engineering special. Review all installation information before installing the
product. Failure to install this engineering special as described can result in
inconsistent Unified CCE behavior.
This document contains these sections:
In the Product
Alert Tool, you can set up profiles to receive email notification of new
Field Notices, Product Alerts, or End of Sale information for your selected
products.
The Product
Alert Tool is available at https://www.cisco.com/cisco/support/notifications.html.
12.5(1)
This section lists the Unified CCE components on which you can and cannot install this engineering special.
You can install Unified CCE 12.5(1) ES69 on these Unified CCE components:
·
AW, Logger
Do not install this engineering special on the following components other than:
·
AW, Logger
Installation
of this patch requires the all ICM services to be shut down during the entire
period of installation. It is
always recommended to install this ES during a scheduled downtime.
1. Using the CCE Service Control, stop all
the CCE services running on the system
2. Launch the Installer provided for ES69 and
follow the instructions on the screen
3. Check the version of tomcat installed by running version.bat
from tomcat\bin folder
cd <ICM
HOME>\tomcat\bin
run version.bat
file. If it is 9.0.37 or higher, then do the following steps:
· Step 1:
In <ICM HOME>\tomcat\config\server.xml make sure the entries for
<Connector> and APJ protocol is as below
<Connector port="8009" protocol="AJP/1.3" redirectPort="8443" address="127.0.0.1"
maxPostSize="5242880" secretRequired="false" allowedRequestAttributesPattern=".*" />
If the highlighted entry is missing, then add the entry in server.xml
· Step 2:
oDownload the 32 bit
tomcat installer zip from http://archive.apache.org/dist/tomcat/tomcat-9/ .
Download the same version that is displayed when version.bat was run.
oUnzip the installer to a
temp folder
oCopy
tomcat-util-scan.jar from the <temp>\apache-tomcat-9.0.xx\lib location
to <ICM HOME>\tomcat\lib
oUsing the ICM/CCE
Service Control, start Apache Tomcat 9 service.
Note: Remove patches in the reverse order of their
installation. For example, if you installed patches 3, then 5, then 10 for a
product, you must uninstall patches 10, 5, and 3, in that order, to remove the
patches from that product.
This section provides a list of significant Unified CCE defects resolved by
this engineering special. It contains these subsections:
Note: You can view more information on and track individual
Unified CCE defects using the Cisco Bug Search tool, located at: https://bst.cloudapps.cisco.com/bugsearch/search?null.
This section lists caveats specifically resolved by Unified CCE 12.5(1)
ES69.
Caveats in this section are ordered by UNIFIED CCE component, severity, and
then identifier.
Identifier |
Severity |
Component |
Headline |
CSCvu80248 |
3 |
web.config.api |
[Smart Licesning] License management option is not available for NAM deployment |
CSCvx98655 |
3 |
web.config.ui |
Licensing Management page is blank in CCEadmin when Contact director is chosen as deployment type |
Caveats are ordered by severity then defect number.
Defect Number: CSCvu80248
Component: web.config.api
Severity: 3
Headline: [Smart Licesning] License management option is not available for NAM deployment
Symptom: License management option is not available for NAM deployment
Conditions: License management option is not available for NAM deployment
Workaround: None
Further Problem Description:
Defect Number: CSCvx98655
Component: web.config.ui
Severity: 3
Headline: Licensing Management page is blank in CCEadmin when Contact director is chosen as deployment type
Symptom: Licensing Management page is blank in CCEadmin
when Contact director is chosen as deployment type
Conditions: Contact director is chosen as deployment type
Workaround: None
Further Problem Description:
You can access current Cisco documentation on the Support pages at the
following sites:
To provide comments about this document, send an email message to the
following address:
contactcenterproducts_docfeedback@cisco.com
We appreciate your comments.
Cisco.com is a starting point for all technical assistance. Customers and
partners can obtain documentation, troubleshooting tips, and sample
configurations from online tools. For Cisco.com registered users, additional
troubleshooting tools are available from the TAC site.
Cisco.com provides a broad range of features and services to help customers
and partners streamline business processes and improve productivity. Through
Cisco.com, you can find information about Cisco and our networking solutions,
services, and programs. You can also resolve technical issues with online
technical support and download software packages. Valuable online skill
assessment, training, and certification programs are also available.
Customers and partners can self-register on Cisco.com to obtain additional personalized information and services. Registered users can order products, check on the status of an order, access technical support, and view benefits specific to their relationships with Cisco.
The Cisco TAC site is available to all customers who need technical
assistance with a Cisco product or technology that is under warranty or covered
by a maintenance contract.
If you have a priority level 3 (P3) or priority level 4 (P4) problem,
contact TAC by going to https://www.cisco.com/c/en/us/support/index.html.
P3 and P4 level problems are defined as follows:
In each of the above cases, use the Cisco TAC site to quickly find answers
to your questions.
If you cannot resolve your technical issue by using the TAC online resources, Cisco.com registered users can open a case online by using the TAC Case Open tool at the following site: https://mycase.cloudapps.cisco.com/create/start/
If you have a priority level 1(P1) or priority level 2 (P2) problem, contact
TAC by telephone and immediately open a case. To obtain a directory of
toll-free numbers for your country, go to the following sites:
P1 and P2 level problems are defined as follows: