This document provides installation instructions for Unified CCE 11.6(2) ES2. It also contains a list of Unified CCE issues resolved by this engineering special. Review all installation information before installing the product. Failure to install this engineering special as described can result in inconsistent Unified CCE behavior.
This document contains these sections:
In the Product Alert Tool, you can set up profiles to receive email notification of new Field Notices, Product Alerts, or End of Sale information for your selected products.
The Product Alert Tool is available at https://www.cisco.com/cisco/support/notifications.html.
Fix For In CCEAdmin, Columns should be resizable
UCCE 11.6(2)
This section list the Unified CCE components on which you can and cannot install this engineering special.
You can install Unified CCE 11.6(2) ES2 on these Unified CCE components:
Do not install this engineering special on the following components other than:
Installation of this patch requires that all ICM services are shut down during the entire installation process. It is always recommended to install this ES during a scheduled downtime.
It has to be installed AW
Note: Remove patches in the reverse order of their installation. For example, if you installed patches 3, then 5, then 10 for a product, you must uninstall patches 10, 5, and 3, in that order, to remove the patches from that product.
How to test the fix for defect associated with this ES.
This section provides a list of significant Unified CCE defects resolved by this engineering special. It contains these subsections:
Caveats in this section are ordered by UNIFIED CCE component, severity, and then identifier.
|
Identifier |
Severity |
Component |
Headline |
|
|
Moderate |
web.config.ui |
Continuation to CSCvn98991. |
Caveats are ordered by severity then defect number.
Defect Number: CSCvo88708
Component: web.config.ui
Severity: Moderate
Headline: Continuation to CSCvn98991.
All columns should be resizable.
(or) at least equal to max size of a field.
Symptom: In CCEAdmin, Columns should be resizable
Conditions: None
Workaround: None
Further Problem Description:
You can access current Cisco documentation on the Support pages at the following sites:
To provide comments about this document, send an email message to the following address:
contactcenterproducts_docfeedback@cisco.com
We appreciate your comments.
Cisco.com is a starting point for all technical assistance. Customers and partners can obtain documentation, troubleshooting tips, and sample configurations from online tools. For Cisco.com registered users, additional troubleshooting tools are available from the TAC site.
Cisco.com provides a broad range of features and services to help customers and partners streamline business processes and improve productivity. Through Cisco.com, you can find information about Cisco and our networking solutions, services, and programs. You can also resolve technical issues with online technical support and download software packages. Valuable online skill assessment, training, and certification programs are also available.
Customers and partners can self-register on Cisco.com to obtain additional personalized information and services. Registered users can order products, check on the status of an order, access technical support, and view benefits specific to their relationships with Cisco.
The Cisco TAC site is available to all customers who need technical assistance with a Cisco product or technology that is under warranty or covered by a maintenance contract.
If you have a priority level 3 (P3) or priority level 4 (P4) problem, contact TAC by going to https://www.cisco.com/c/en/us/support/index.html.
P3 and P4 level problems are defined as follows:
In each of the above cases, use the Cisco TAC site to quickly find answers to your questions.
If you cannot resolve your technical issue by using the TAC online resources, Cisco.com registered users can open a case online by using the TAC Case Open tool at the following site: https://mycase.cloudapps.cisco.com/create/start/
If you have a priority level 1(P1) or priority level 2 (P2) problem, contact TAC by telephone and immediately open a case. To obtain a directory of toll-free numbers for your country, go to the following sites:
P1 and P2 level problems are defined as follows: