This document provides installation instructions for ICM11.0(2) ES11. It also contains a list of ICM issues resolved by this engineering special. Please review all sections in this document pertaining to installation before installing the product. Failure to install this engineering special as described may result in inconsistent ICM behavior.
This document contains these sections:
The Product
Alert Tool offers you the ability to set up one or more profiles that will
enable you to receive email notification of new Field Notices, Product Alerts
or End of Sale information for the products that you have selected.
The Product
Alert Tool is available at http://www.cisco.com/cgi-bin/Support/FieldNoticeTool/field-notice
ICM 11.0(2)
ICM11.0(2) ES11 is compatible with and should be installed
on these ICM components:
Do not
install this engineering special on any of the components other than:
·
Installation of this
patch requires the all ICM services to be shutdown during the
entire period of installation. It is always recommended to install this ES
during a scheduled downtime.
·
Using the ICM
Service Control, stop all the ICM services running on the system
·
Launch the Installer
provided for ES11 and following the instructions on the screen
·
Using the ICM
Service Control, start all ICM services again.
To uninstall this patch, go to Control Panel. Select "Add or Remove Programs". Find the installed patch in the list and select "Remove".
Note: Patches have to be removed in the reverse order in which they were installed. For example, if you had installed patches 3, then 5, then 10 for a product, you will need to uninstall patches 10, 5 and 3 in that order to remove all patches for that product.
This section provides a list of significant ICM defects resolved by this engineering special. It contains these subsections:
Note: You can view more information on and track individual ICM defects using the Cisco Bug Toolkit located at: http://www.cisco.com/support/bugtools/Bug_root.html
This section lists caveats specifically resolved by ICM11.0(2) ES11.
Caveats in this section are ordered by ICM component, severity, and then
identifier.
Be sure to include ALL of the resolved caveats for the files you're delivering,
i.e. all of the caveats from the release notes of the previous ES which
included these files.
Identifier |
Severity |
Component |
Headline |
CSCux10479 |
6 |
scripteditor |
Find
Nodes Search Function refreshes in Script Editor |
Caveats are ordered by severity then defect number.
Be sure to include ALL of the resolved caveats for the files you're delivering,
i.e. all of the caveats from the release notes of the previous ES which
included these files.
Defect Number: CSCux10479
Component: scripteditor
Severity: 6
Headline: Find Nodes Search Function refreshes in Script Editor
Symptom:
Intermittently customer receives a refresh during a string search in script
editor. This only occurs when an update or change is being done in the
background of the script. Search refreshes on its own and starts the search
again without customer clicking the search option again.
Conditions: This condition occurs when background changes or updates occur
within the minute of the next refresh. Find Nodes by: String or Object Find
Nodes In: All active script versions Please enter String:
Workaround: N/A
Further Problem Description: One
or more of the following links will take you to an emergency patch called an
Engineering Special or ES. If you are not directly experiencing this problem,
we encourage you to select or wait for a formally tested fix in an upcoming
major, minor, or maintenance release. Installing any interim emergency patch or
ES on a production system poses a risk of instability due to the limited
testing it receives. If you believe you are currently experiencing this problem
and you cannot wait for a later release, please select the link for the ES
built for your system. To identify the base version for this ES, please remove
_ES?? from the version name listed below. That will
give you the version of the tested base release you may install a given ES
over. Be sure to read the release notes or Readme file before running the patch
installer.
ES
|
Identifier
|
Severity
|
Component
|
Headline
|
#1
|
CSCux73064
CSCux63199
CSCux62990
|
2
2
2
|
Scripteditor
Scripteditor
scripteditor
|
ISE
users are able to see agents/services of all departments.
Internet
Script editor(ISE) is not validating ISE user
domain.
Skillgroup associated with Department ID is not
listing in Script editor
|
#3
|
CSCuv75904
|
3
|
scripteditor
|
Script
Editor crashes with Microsoft hot fixes
|
#5
|
CSCuy05782
|
3
|
scripteditor
|
Custom
Function Editor in Script Editor is not Accepting
any Parameters
|
The following sections provide sources for obtaining documentation from Cisco Systems.
You can access the most current Cisco documentation on the World Wide Web at the following sites:
Cisco documentation and additional literature are available in a CD-ROM package, which ships with your product. The Documentation CD-ROM is updated monthly and may be more current than printed documentation. The CD-ROM package is available as a single unit or as an annual subscription.
Cisco documentation is available in the following ways:
If you are reading Cisco product documentation on the World Wide Web, you can submit technical comments electronically. Click Feedback in the toolbar and select Documentation. After you complete the form, click Submit to send it to Cisco.
You can e-mail your comments to bug-doc@cisco.com.
To submit your comments by mail, use the response card behind the front cover of your document, or write to the following address:
Attn Document Resource Connection
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-9883
We appreciate your comments.
Cisco provides Cisco.com as a starting point for all technical assistance. Customers and partners can obtain documentation, troubleshooting tips, and sample configurations from online tools. For Cisco.com registered users, additional troubleshooting tools are available from the TAC website.
Cisco.com is the foundation of a suite of interactive, networked services that provides immediate, open access to Cisco information and resources at anytime, from anywhere in the world. This highly integrated Internet application is a powerful, easy-to-use tool for doing business with Cisco.
Cisco.com provides a broad range of features and services to help customers and partners streamline business processes and improve productivity. Through Cisco.com, you can find information about Cisco and our networking solutions, services, and programs. In addition, you can resolve technical issues with online technical support, download and test software packages, and order Cisco learning materials and merchandise. Valuable online skill assessment, training, and certification programs are also available.
Customers and partners can self-register on Cisco.com to obtain additional personalized information and services. Registered users can order products, check on the status of an order, access technical support, and view benefits specific to their relationships with Cisco.
To access Cisco.com, go to: http://www.cisco.com
The Cisco TAC website is available to all customers who need technical assistance with a Cisco product or technology that is under warranty or covered by a maintenance contract.
If you have a priority level 3 (P3) or priority level 4 (P4) problem, contact TAC by going to the TAC website: http://www.cisco.com/tac
P3 and P4 level problems are defined as follows:
In each of the above cases, use the Cisco TAC website to quickly find answers to your questions.
To register for Cisco.com, go to the following website: http://www.cisco.com/register/
If you cannot resolve your technical issue by using the TAC online resources, Cisco.com registered users can open a case online by using the TAC Case Open tool at the following website: http://www.cisco.com/tac/caseopen
If you have a priority level 1(P1) or priority level 2 (P2) problem, contact TAC by telephone and immediately open a case. To obtain a directory of toll-free numbers for your country, go to the following website: http://www.cisco.com/warp/public/687/Directory/DirTAC.shtml
P1 and P2 level problems are defined as follows: