Choose Networking > IPv6 > IPv6 LAN Configuration.
Enter the following information to configure the IPv6 LAN address:
IPv6 Address
Enter the IPv6 address of the RV110W.
The default IPv6 address for the gateway is fec0::1.
You can change this 128-bit IPv6 address based on
your network requirements.
IPv6 Prefix Length
Enter the IPv6 prefix length.
The IPv6 network (subnet) is identified by the initial
bits of the address called the prefix. By default, the
prefix is 64 bits long.
All hosts in the network have the identical initial bits
for their IPv6 address; you set the number of
common initial bits in the network’s addresses in
this field.