Table Of Contents

Supporting International Users

Installing the Cisco Unified CallManager Locale Installer

Supporting International Users

---

Translated and localized versions of the Cisco Unified Wireless IP Phone 7921G user interface include:

•English

•French

•German

•Japanese

Prior to deploying the wireless IP phones, download the locale installer for the firmware releases and configure the languages in Cisco Unified CallManager. For more information about installing the locale installer, "Installing the Cisco Unified CallManager Locale Installer" section. You can obtain translated documentation for the Cisco Unified IP Phones at this URL:

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/index.htm

Installing the Cisco Unified CallManager Locale Installer

If you are using Cisco Unified IP Phones in a locale other than English, you must install the locale-specific version of the Cisco Unified CallManager Locale Installer to ensure that you have the latest translated text, user and network locales, and country-specific phone tones available for the Cisco Unified IP Phones.

To provide localized versions of the Cisco Unified Wireless IP Phone 7921G, follow these steps:

Procedure

---

Step 1 Download the locale-specific version of the Cisco Unified CallManager Locale Installer at this URL: http://www.cisco.com/kobayashi/sw-center/telephony/callmgr/locale-installer.shtml.

Step 2 Install the locale-specific version of the Cisco Unified CallManager Locale Installer on every Cisco Unified CallManager server in the cluster.

•For Cisco Unified CallManager Release 4.1 and later, refer to Using the Cisco Unified IP Telephony Locale Installer for Cisco Unified CallManager for your Cisco Unified CallManager release.

•For Cisco Unified CallManager Releases 5.0 and later, refer to the "Locale Installation" section in the Cisco IP Telephony Platform Administration Guide.

Step 3 After modifying the user locale on the Cisco Unified Wireless IP Phone 7921G, you must power cycle the phone.

---

---

Note When deploying Cisco Unified Wireless IP Phone 7921G for the first time, you must install the 7921G Device Pack to add the new phone type to Cisco Unified CallManager. Then you must reinstall the locale specific Cisco Unified CallManager Locale Installer to update the user locale for the Cisco Unified Wireless IP Phone 7921G.

---

---

Note All languages may not be immediately available, so continue to check the website for updates.

---