Cisco MDS 9000 Family Command Reference, Release 1.3 (from Release 1.3(1) through Release 1.3(6))
New and Changed Information

Table Of Contents

New and Changed Information


New and Changed Information


Table 1 summarizes the new and changed features for the Cisco MDS 9000 Family Command Reference, and tells you where they are documented. If a feature has changed in Release 1.3, a brief description of the change appears in the "Description" column, and that release is shown in the "Changed in Release" column.

Table 1 Documented Features for the Cisco MDS 9000 Family Command Reference

Feature
Description
Changed in Release
Where Documented

TL port ALPA cache

The tlport alpa-cache command

1.3(5)

T Commands

The show tlport alpa-cache command

Show Commands

The clear tlport alpa-cache command.

C Commands

FICON features

The show ficon first-available port-address command

1.3(4)

Show Commands

The ficon vsan vsan-id offline and online commands

F Commands

IP Storage updates

The FCIP tcp min-available-bandwidth command.

1.3(4)

T Commands

The iSCSI tcp send-buffer-size command

The iSCSI tcp min-available-bandwidth command

The iSCSI tcp cwm command

The iSCSI and FCIP tcp max-jitter command

Online Health Management System

The system health, system health clear-errors, system health external-loopback, system health internal-loopback, and system health module commands

1.3(4)

S Commands

The show system health command

Show Commands

Distributing zone sets

The zoneset distribute vsan command

1.3(4)

Z Commands

The show zone status vsan command

Show Commands

Switch summary

The show tech-support brief command

1.3(4)

Show Commands

In-Order-Guarantee (IOD)

The in-order-guarantee vsan command

1.3(4)

I Commands

IVR virtual domains

The ivr virtual-fcdomain-add vsan-ranges command

1.3(4)

I Commands

The show ivr virtual-fcdomain-add-status command

Show Commands

The ivr withdraw domain command

I Commands

Banner message

The banner motd command

1.3(4)

B Commands

The show banner motd command

Show Commands

iSCSI SACK Default

The TCP SACK parameter is enabled by default for iSCSI configurations.

1.3(3)

T Commands

Zones

The zoneset import command

1.3(2a)

Z Commands

The zoneset export command

1.3(2a)

NVRAM

The clear system reset-reason command

1.3(2a)

C Commands

Licensing

The update license url command

1.3(2a)

U Commands

SCSI targets

The show scsi-target pwwn command

1.3(2a)

Show Commands

The discover scsi-target local command

1.3(2a)

D Commands

Licensing

The install license command

1.3(1)

I Commands

The show license command

Show Commands

PortChannel quiesce

The quiesce command

1.3(1)

Q Commands

Zone

The member domain-id domain-id port-number port-number, member ipaddress ip-address subnet-mask, member interface fc slot-port, member interface fc slot-port swwn switch-wwn, and the member interface fc slot-port domain-id domain-id commands

1.3(1)

Z Commands

The EXEC zone copy command

The show zone statistics lun-zoning and the show zone statistics read-only-zoning commands

Show Commands

Inter-VSAN routing (IVR)

The ivr enable, ivr vsan-topology, ivr zone, and the ivr zoneset commands

1.3(1)

I Commands

The show ivr command

Show Commands

The clear ivr zone database command

C Commands

The logging level ivr command

L Commands

AAA server groups

The aaa accounting logsize, aaa accounting default, aaa authentication login, aaa authentication iscsi, aaa authentication dhchap, and the aaa group server commands

1.3(1)

A Commands

The show aaa authentication, show aaa groups, and the show aaa accounting commands

Show Commands

RADIUS enhancements

The radius-server host, radius-server key, radius-server retransmit, and the radius-server timeout commands

1.3(1)

R Commands

The show radius-server command

Show Commands

TACACS+ authentication

The tacacs+ enable, tacacs-server host, tacacs-server key, and the tacacs-server timeout commands

1.3(1)

T Commands

The show tacacs-server command

Show Commands

FC-SP DHCHAP

The fcsp dhchap, fcsp enable, and the fcsp timeout commands

1.3(1)

F Commands

The interface fcsp command

I Commands

The show fcsp command

Show Commands

FI-bre CON-nection (FICON)

The setup ficon and the he snmp port commands

1.3(1)

S Commands

The ficon swap, the ficon vsan vsan-id (EXEC mode), ficon vsan vsan-id (configuration mode), file file-name, and the fcid-last-byte commands

F Commands

The ficon portnumber portnumber command

I Commands

The code-page and the clear ficon commands

C Commands

The host command

H Commands

The active equals saved command

A Commands

The portaddress command

P Commands

The show ficon command

Show Commands

Fabric binding

The fabric-binding activate, fabric-binding database copy, fabric-binding database diff, fabric-binding database vsan, and the fabric-binding enable commands

1.3(1)

F Commands

The show fabric-binding enable command

Show Commands

The clear fabric-binding statistics command

C Commands

Registered Link Incident Report (RLIR)

The show rlir command

1.3(1)

Show Commands

The clear rlir command

C Commands

Trespass support

The trespass command

1.3(1)

I Commands

Internet Storage Name Service (iSNS)

The isns profile and the isns register commands

The interface gigabitethernet slot_number
isns profile-name command

The show isns command

1.3(1)

Show Commands

Proxy initiator

The switchport proxy-initiator command

1.3(1)

S Commands

FCIP write accelerator

The write-accelerator command

1.3(1)

W Commands

FCIP compression

The ip-compression command

1.3(1)

I Commands

Call Home enhancements

The destination-profile profile-name command

1.3(1)

C Commands

The show callhome destination-profile command

Show Commands

FC Domain ID changes

The fcdomain allowed range vsan vsan-id

1.3(1)

F Commands

The show fcdomain command

Show Commands

Port rate limiting

The switchport ingress-rate command

1.3(1)

S Commands

Quality of Service (QoS)

The qos enable, qos class-map, qos dwrr-q, qos policy-map, and the qos service commands

1.3(1)

Q Commands

The show qos statistics command

Show Commands

SPAN source

The source interface command

1.3(1)

S Commands

Module uptime

The show module uptime command

1.3(1)

Show Commands

Per VSAN Time Out Values (TOV)

The fctimer command.

1.3(1)

F Commands

Running configuration information

The show running diff, show running interface, and the show running vsan commands

1.3(1)

Show Commands

Transceiver and calibration information

The show interface interface-type slot/port transceiver command

1.3(1)

Buffer-to-Buffer Credit (BB_credit) display

The show interface bbcredit command

1.3(1)

Fabric-Device Management Interface (FDMI)

The show fdmi command

1.3(1)

Auto-discovery of SCSI targets

The show scsi-target auto-poll command.

1.3(1)

IP Storage

The switchport auto-negotiate command and the switchport- promiscuous-mode commands were added.

1.1(1)

S Commands

Deleting directories

The delete command

All

D Commands


Table 2 contains the history of the changes to the Cisco MDS 9000 Family Command Reference, Release 1.3. When the document is updated for the next release, these changes are incorporated into the new revision and will no longer appear in this table.

Table 2 Documentation Changes for Cisco MDS 9000 Family Command Reference, Release 1.3

Date
Description of Change
Where Changed

11/21/2003

Document created

See Table 1.

12/19/2003

New 1.3(2a) features documented

See Table 1.

01/13/2004

New 1.3(3) features documented

See Table 1.

04/19/2004

New 1.3(4a) features documented

See Table 1.