Cisco MDS 9000 Family Fabric Manager User Guide, Release 1.1(1a) (Updated: Sep 25, 2003) - Managing the System and Components [Cisco MDS 9000 NX-OS and SAN-OS Software]

Table Of Contents

Managing the System and Components

Viewing System Attributes

Viewing Running Processes

Viewing Flash File Information

Managing Inventory Information

Managing Card Attributes

Managing Temperature Sensor Information

Managing Power Supplies

Managing the System and Components

The Fabric Manager allows you to configure and monitor modules on multiple Cisco MDS 9000 switches. The Device Manager allows you to configure and monitor modules on a single Cisco MDS 9000 switch.

Note For information about configuring the chassis and its components using the command-line interface (CLI), refer to the Cisco 9000 Family Configuration Guide.

Procedures for managing the system and components include:

•Viewing System Attributes

•Viewing Running Processes

•Viewing Flash File Information

•Managing Inventory Information

•Managing Card Attributes

•Managing Temperature Sensor Information

•Managing Power Supplies

Viewing System Attributes

To manage system attributes, perform the following steps.

Step 1 From the Fabric Manager, choose Switches on the menu tree, OR
From the Device Manager, choose System from the Admin menu.

The Fabric Manager Information pane displays system attributes for multiple switches. The dialog box from the Device Manager displays system attributes for a single switch.

Step 2 Configure the system attributes for the chassis.

Note You can access the field descriptions for the windows or dialog boxes in this procedure in the Reference section of the Fabric Manager or Device Manager help systems.

Viewing Running Processes

To view information about the processes currently running on a switch, perform the following step.

Step 1 From the Device Manager, choose Running Processes from the Admin menu.

You see the Running Processes dialog box.

Note You can access the field descriptions for the windows or dialog boxes in this procedure in the Reference section of the Fabric Manager or Device Manager help systems.

Viewing Flash File Information

To view information about the files currently stored in flash memory on the switch, perform the following step.

Step 1 From the Device Manager, choose Flash Files from the Admin menu.

You see the Flash Files dialog box.

Note You can access the field descriptions for the windows or dialog boxes in this procedure in the Reference section of the Fabric Manager or Device Manager help systems.

Managing Inventory Information

To manage inventory attributes, perform the following steps.

Step 1 From the Fabric Manager, choose Switches > Modules on the menu tree and click the Inventory tab, OR
From the Device Manager, choose Inventory from the Physical menu.

The Fabric Manager Information pane displays system attributes for multiple switches. The dialog box from the Device Manager displays system attributes for a single switch.

Step 2 Configure the inventory attributes for the module.

Note You can access the field descriptions for the windows or dialog boxes in this procedure in the Reference section of the Fabric Manager or Device Manager help systems.

Managing Card Attributes

To manage card status attributes, perform the following steps.

Step 1 From the Fabric Manager, choose Switches > Modules on the menu tree and click the Card Status tab, OR
From the Device Manager, choose Modules from the Physical menu.

The Information pane from the Fabric Manager displays card attributes for multiple switches. The dialog box from the Device Manager view displays attributes for a single switch.

Step 2 Configure the status attributes for the module.

Note You can access the field descriptions for the windows or dialog boxes in this procedure in the Reference section of the Fabric Manager or Device Manager help systems.

Managing Temperature Sensor Information

To monitor sensor temperature attributes, perform the following steps.

Step 1 From the Fabric Manager, choose Switches > Modules on the menu tree and click the Temperature Sensors tab, OR
From the Device Manager, choose Temperature Sensors from the Physical menu.

The Information pane from the Fabric Manager displays sensor temperature attributes for multiple switches. The Sensors dialog box from the Device Manager displays sensor temperature attributes for a single switch.

Step 2 Configure the sensor attributes.

Note You can access the field descriptions for the windows or dialog boxes in this procedure in the Reference section of the Fabric Manager or Device Manager help systems.

Managing Power Supplies

To manage power supply power attributes, perform the following steps.

Step 1 From the Fabric Manager, choose Switches > Modules on the menu tree and click the Power Supplies tab, OR
From the Device Manager, choose Power Supplies from the Physical menu.

The Information pane from the Fabric Manager displays power supply power attributes for multiple switches. The dialog box from the Device Manager displays power supply power attributes for a single switch.

Step 2 Configure the power attributes for the power supply.

Note You can access the field descriptions for the windows or dialog boxes in this procedure in the Reference section of the Fabric Manager or Device Manager help systems.

	Cisco MDS 9000 Family Fabric Manager User Guide, Release 1.1(1a) (Updated: Sep 25, 2003)
	Managing the System and Components
Cisco MDS 9000 Family Fabric Manager User Guide, Release 1.1(1a) (Updated: Sep 25, 2003) Index Preface Getting Started with Cisco Fabric Manager Using Cisco Fabric Manager and Device Manager Managing Zones and Zone Sets Managing VSANs Managing Administrator Access Managing Software and Configuration Files Managing Interfaces Managing Events and Alarms Managing the System and Components Managing Fibre Channel Routing and FSPF Managing IP Storage Services Managing Advanced Features	Download this chapter Managing the System and Components Download the complete book Full Book PDF (PDF - 2 MB) Feedback Table Of Contents Managing the System and Components Viewing System Attributes Viewing Running Processes Viewing Flash File Information Managing Inventory Information Managing Card Attributes Managing Temperature Sensor Information Managing Power Supplies Managing the System and Components The Fabric Manager allows you to configure and monitor modules on multiple Cisco MDS 9000 switches. The Device Manager allows you to configure and monitor modules on a single Cisco MDS 9000 switch. Note For information about configuring the chassis and its components using the command-line interface (CLI), refer to the Cisco 9000 Family Configuration Guide. Procedures for managing the system and components include: •Viewing System Attributes •Viewing Running Processes •Viewing Flash File Information •Managing Inventory Information •Managing Card Attributes •Managing Temperature Sensor Information •Managing Power Supplies Viewing System Attributes To manage system attributes, perform the following steps. Step 1 From the Fabric Manager, choose Switches on the menu tree, OR From the Device Manager, choose System from the Admin menu. The Fabric Manager Information pane displays system attributes for multiple switches. The dialog box from the Device Manager displays system attributes for a single switch. Step 2 Configure the system attributes for the chassis. Note You can access the field descriptions for the windows or dialog boxes in this procedure in the Reference section of the Fabric Manager or Device Manager help systems. Viewing Running Processes To view information about the processes currently running on a switch, perform the following step. Step 1 From the Device Manager, choose Running Processes from the Admin menu. You see the Running Processes dialog box. Note You can access the field descriptions for the windows or dialog boxes in this procedure in the Reference section of the Fabric Manager or Device Manager help systems. Viewing Flash File Information To view information about the files currently stored in flash memory on the switch, perform the following step. Step 1 From the Device Manager, choose Flash Files from the Admin menu. You see the Flash Files dialog box. Note You can access the field descriptions for the windows or dialog boxes in this procedure in the Reference section of the Fabric Manager or Device Manager help systems. Managing Inventory Information To manage inventory attributes, perform the following steps. Step 1 From the Fabric Manager, choose Switches > Modules on the menu tree and click the Inventory tab, OR From the Device Manager, choose Inventory from the Physical menu. The Fabric Manager Information pane displays system attributes for multiple switches. The dialog box from the Device Manager displays system attributes for a single switch. Step 2 Configure the inventory attributes for the module. Note You can access the field descriptions for the windows or dialog boxes in this procedure in the Reference section of the Fabric Manager or Device Manager help systems. Managing Card Attributes To manage card status attributes, perform the following steps. Step 1 From the Fabric Manager, choose Switches > Modules on the menu tree and click the Card Status tab, OR From the Device Manager, choose Modules from the Physical menu. The Information pane from the Fabric Manager displays card attributes for multiple switches. The dialog box from the Device Manager view displays attributes for a single switch. Step 2 Configure the status attributes for the module. Note You can access the field descriptions for the windows or dialog boxes in this procedure in the Reference section of the Fabric Manager or Device Manager help systems. Managing Temperature Sensor Information To monitor sensor temperature attributes, perform the following steps. Step 1 From the Fabric Manager, choose Switches > Modules on the menu tree and click the Temperature Sensors tab, OR From the Device Manager, choose Temperature Sensors from the Physical menu. The Information pane from the Fabric Manager displays sensor temperature attributes for multiple switches. The Sensors dialog box from the Device Manager displays sensor temperature attributes for a single switch. Step 2 Configure the sensor attributes. Note You can access the field descriptions for the windows or dialog boxes in this procedure in the Reference section of the Fabric Manager or Device Manager help systems. Managing Power Supplies To manage power supply power attributes, perform the following steps. Step 1 From the Fabric Manager, choose Switches > Modules on the menu tree and click the Power Supplies tab, OR From the Device Manager, choose Power Supplies from the Physical menu. The Information pane from the Fabric Manager displays power supply power attributes for multiple switches. The dialog box from the Device Manager displays power supply power attributes for a single switch. Step 2 Configure the power attributes for the power supply. Note You can access the field descriptions for the windows or dialog boxes in this procedure in the Reference section of the Fabric Manager or Device Manager help systems.
	Terms & Conditions \| Privacy Statement \| Cookie Policy \| Trademarks