The commands in this chapter apply to the Cisco MDS 9000 Family of multilayer directors and fabric switches. All commands are shown here in alphabetical order regardless of command mode. Please see the Command Mode section to determine the appropriate mode for each command. For more information, see the Cisco MDS 9000 Family Configuration Guide.
•ntp
ntp
To configure NTP settings on the switch, use the ntp command.
ntp {peer hostname | server | tstamp-check}
Syntax Description
peer hostname
The hostname/IP address of the NTP peer (Max Size - 80).
server
The hostname/IP address of the NTP server (Max Size - 80).
tstamp-check
Enables or disables Riviera Timestamp Check.
Defaults
This command has no default settings.
Command Modes
Configuration.
Usage Guidelines
None.
Examples
This example forms a server association with a server.
switch(config)# ntp server 10.10.10.10
switch(config)#
This example forms a peer association with a peer. You can specify multiple associations.