Table Of Contents
Release Notes for Cisco Security MARS Appliance 6.1.2
Introduction
Supported Hardware
New Features
Changes and Enhancements
New Vendor Signatures
Upgrade Instructions
Important Upgrade Notes
General Notes
Upgrade to 6.1.2
Upgrade to 6.1.1
Upgrade to 6.0.8
Upgrade to 6.0.7
Upgrade to 6.0.6
Upgrade to 6.0.5
Upgrade to 6.0.4
Upgrade to 6.0.3
Upgrade to 6.0.2
Upgrade to 6.0.1
Upgrade Path Matrix
Downloading the Upgrade Package from CCO
Documentation Errata
Important Notes
Caveats
Open Caveats for Supporting Devices
Open Caveats— Release 6.1.2
Resolved Caveats —Release 6.1.2
Resolved Caveats —Releases Prior to 6.1.1
Product Documentation
Obtaining Documentation, Obtaining Support, and Security Guidelines
Release Notes for Cisco Security MARS Appliance 6.1.2
Last Published: Feb 22, 2011
Note 
We sometimes update the printed and electronic documentation after original publication. Therefore, you should review the documentation on Cisco.com for any updates.
These release notes are for use with the Cisco Security Monitoring, Analysis, and Response System (MARS) Release 6.1.2, running on any supported MARS Appliance model listed in Supported Hardware.
This chapter contains the following topics:
•Introduction
•Supported Hardware
•New Features
•Upgrade Instructions
•Documentation Errata
•Important Notes
•Caveats
•Product Documentation
•Obtaining Documentation, Obtaining Support, and Security Guidelines
Introduction
Release 6.1.2 is now available as an upgrade of 6.1.1 of your software release in support of the MARS Appliance models as identified in Supported Hardware. Registered SMARTnet users can obtain release 6.1.2 from the Cisco support website at the following URL:
http://www.cisco.com/go/mars/
Open the page and then click the Download Software link in the Support box on the right side of the MARS product home page.
Supported Hardware
Release 6.1.2 supports the following Cisco Security MARS Appliance models:
Local Controller Appliances: 2nd Generation
•Cisco Security MARS 25R (CS-MARS-25R-K9)
•Cisco Security MARS 25 (CS-MARS-25-K9)
•Cisco Security MARS 55 (CS-MARS-55-K9)
•Cisco Security MARS 110R (CS-MARS-110R-K9)
•Cisco Security MARS 110 (CS-MARS-110-K9)
•Cisco Security MARS 210 (CS-MARS-210-K9)
Local Controller Appliances: 1st Generation
•Cisco Security MARS 20R (CS-MARS-20R-K9) as a MARS 20
•Cisco Security MARS 20 (CS-MARS-20-K9)
•Cisco Security MARS 50 (CS-MARS-50-K9)
•Cisco Security MARS 100e (CS-MARS-100E-K9) as a MARS 100
•Cisco Security MARS 100 (CS-MARS-100-K9)
•Cisco Security MARS 200 (CS-MARS-200-K9)
Global Controller Appliances: 2nd Generation
•Cisco Security MARS GC2R (CS-MARS-GC2R-K9)
•Cisco Security MARS GC2 (CS-MARS-GC2-K9)
Global Controller Appliances: 1st Generation
•Cisco Security MARS GCm (CS-MARS-GCM-K9) as a MARS GC
•Cisco Security MARS GC (CS-MARS-GC-K9)
New Features
This release includes contains no new features. It is a release dedicated to issue resolution.
Changes and Enhancements
All changes made in this release are related to the issues listed in Caveats.
Note If you are upgrading from Windows 2003 to Windows 2008, ensure that any ancillary devices and software you employ are supported. For more information see Supported and Interoperable Devices and Software for Cisco Security MARS Local Controller 6.x.
New Vendor Signatures
The following table describes the most recent signatures supported for each product or technology:
Revised in 6.1.2
|
Product
|
Signature Version Supported
|
Intrusion Prevention and Detection Signatures
|
Yes
|
Cisco IDS 4.0
Cisco IPS 5.x
Cisco IPS 6.x
Cisco IPS 7.x
|
Current through S539 signature release. Current as of January 11, 2011.
|
Yes
|
Cisco ASA
|
Current as of September, 2010.
|
No
|
Cisco IOS 12.2/12.3/12.4
|
Current as of March 9, 2010.
|
Yes
|
Snort 2.8
|
Current as of September 7, 2010
Latest signature mapped: 17209.
|
Yes
|
ISS RealSecure Network Sensor 6.5 and 7.0, and
ISS RealSecure Server Sensor 6.5 and 7.0
|
XPU 30.080
Release date: August 10, 2010
|
Yes
|
McAfee IntruShield 4.1
|
v4.1.80.22
Release date: August 26, 2010
|
Yes
|
McAfee Entercept HIDS 6.x
|
Current through the August 17, 2010 signature release.
|
Yes
|
CheckPoint Application Intelligence
(VPN-1 NG with Application Intelligence R65)
|
Current through the August 30, 2010 signature release.
|
Yes
|
Juniper IDP
|
Signature version: 4.0
Release date:September 9, 2010
|
No
|
Netscreen IDP 3.x
|
Signature version: 4.0
Release date: June 14, 2010
|
Yes
|
Enterasys Dragon 7.2/7.3
|
Current through the September 2, 2010 signature release.
|
Vulnerability Scanner Signatures
|
Yes
|
Qualys Guard ANY
|
Current through the September 8, 2010 signature release.
|
Yes
|
E-Eye, Retina Scanner Vulnerability Software, version v5.11.1.2181
|
Current through the September 1, 2010 signature release.
|
No
|
Foundstone, version ANY
|
Current through the June 17, 2010 signature release.
|
Yes
|
Common Vulnerabilities and Exposures (CVE) Database
|
Current with the September 10, 2010 definition update.
|
Miscellaneous Support
|
No
|
Oracle 11g
|
Support for new AUDIT_ACTIONS.
|
Upgrade Instructions
The MARS upgrade packages are the primary vehicle for major, minor, and patch software releases. In addition to addressing high-priority caveats, upgrade packages update system inspection rules, event types, and provide the most recent signature support.
For detailed instructions on planning and performing an upgrade or installation, refer to "Checklist for Upgrading the Appliance Software" in the Cisco Security MARS Initial Configuration and Upgrade Guide.
Important Upgrade Notes
To ensure that the upgrade from earlier releases is trouble free, this section contains the notes provided in previous releases according the release number. Please refer to the notes that pertain to the release you are upgrading from and any releases following that one.
General Notes
The following general notes apply to this release:
•If you are upgrading from Windows 2003 to Windows 2008, ensure that any ancillary devices and software you employ are supported. For more information see Supported and Interoperable Devices and Software for Cisco Security MARS Local Controller 6.x.
•When downloading software packages from CCO to MARS, ensure that your credentials (username or password) do not include the ampersand (&) character. The credential will be truncated before being passed to the authentication module, which results in an error message about invalid user credentials.
•The MARS Appliance performs a file system consistency check (fsck) on all disks when either of the following conditions is met:
–The system has not been rebooted during the past 180 days.
–The system has been rebooted 30 times.
The fsck operation takes a long time to complete, which can result in significant unplanned downtime when rebooting the system after meeting a condition above. For example, a MARS 50 appliance can take up to 90 minutes to perform the operation.
Upgrade to 6.1.2
No important notes exist for the 6.1.2 upgrade.
Upgrade to 6.1.1
If you are upgrading from Windows 2003 to Windows 2008, ensure that any ancillary devices and software you employ are supported. For more information see Supported and Interoperable Devices and Software for Cisco Security MARS Local Controller 6.x.
Upgrade to 6.0.8
No important notes exist for the 6.0.8 upgrade.
Upgrade to 6.0.7
If you are upgrading from Windows 2003 to Windows 2008, ensure that any ancillary devices and software you employ are supported. For more information see Supported and Interoperable Devices and Software for Cisco Security MARS Local Controller 6.x.
Upgrade to 6.0.6
No important notes exist for the 6.0.6 upgrade.
Upgrade to 6.0.5
The 6.0.5 release is a general bug fix and signature update release for all MARS appliance models. However, it offers new functionality for an existing CS-MARS 110R when you order and install a FIPS-compliant PCI card. Once installed, you can configure FIPS-specific features within MARS. For more information, see the CS-MARS FIPS PCI CARD Quick Install document.
Upgrade to 6.0.4
No important notes exist for the 6.0.4 upgrade.
Upgrade to 6.0.3
No important notes exist for the 6.0.3 upgrade.
Upgrade to 6.0.2
No important notes exist for the 6.0.2 upgrade.
Upgrade to 6.0.1
The upgrade process to 6.0.1 differs based on the release you are upgrading from. If you are upgrading a 5.x release, you can upgrade to 6.0.1 if you are running 5.3.6. The upgrade from 5.3.6 to 6.0.1 takes several hours, as it also upgrades the Oracle database running on the appliance. If you are running an earlier 5.x release, you must first upgrade to 5.3.6 .
However, if you are upgrading a 4.x release, you must migrate the system instead of upgrading. To migrate from a 4.x, you must follow the step-by-step instructions specified in the Migrating Data from Cisco Security MARS 4.x to 6.0.1.
Note When upgrading a "restricted" model of MARS appliance (20R, 100e, or GCm) to MARS Software release 6.0.1, all limits enforced by the restricted model are ignored. The "restricted" models perform as unrestricted models (20, 100, or GC) once upgraded to release 6.0.1.
Upgrade Path Matrix
When upgrading from one software release to another, a prerequisite release is always required. This prerequisite release is the minimum level required to be running on the appliance before you can upgrade to the most recent release. Table 1 identifies the upgrade path that you must follow to reach the minimum level required to upgrade to current release.
Table 1 Upgrade Path Matrix
From Release
|
Upgrade To
|
Upgrade Package
|
4.3.6
|
6.0.1
|
Migration required. See Migrating Data from Cisco Security MARS 4.x to 6.0.1
|
5.3.6
|
6.0.1
|
csmars-6.0.1.3066.pkg
|
6.0.1 (3066) or 6.0.1 (3070)
|
6.0.2
|
csmars-6.0.2.3102.zip
|
6.0.2
|
6.0.3
|
csmars-6.0.3.3186.zip
|
6.0.3
|
6.0.4
|
csmars-6.0.4.3229.zip
|
6.0.4
|
6.0.5 no FIPS support
|
csmars-6.0.5.3358.iso/zip
|
6.0.5 with FIPS support
|
csmars-6.0.5.3361-FIPS.iso/zip
|
6.0.5
|
6.0.6
|
csmars-6.0.6.3367.zip
|
6.0.6
|
6.0.7
|
csmars-6.0.7.3403.zip
|
6.0.7
|
6.0.8
|
csmars-6.0.8.3427.zip
|
6.0.8
|
6.1.1
|
csmars-6.1.1.3445.zip
|
6.1.1
|
6.1.2 no FIPS support
|
csmars-6.1.2.3466.zip
|
6.1.2 with FIPS support
|
csmars-6.1.2.3466.iso
|
Downloading the Upgrade Package from CCO
Upgrade images and supporting software are found on the CCO software download pages dedicated to MARS. You can access these pages at the following URLs, assuming you have a valid CCO account and that you have registered your SMARTnet contract number for your MARS Appliance
Top-level page:
•http://www.cisco.com/go/mars/
And then click the Download Software link in the Support box on the right side of the MARS product home page.
Result: The Download Software page loads.
From the Download Software page, select one of the following options:
•CS-MARS IPS Signature Updates Archives
•CS-MARS IPS Signature Updates
•CS-MARS Patches and Utilities (supplementary files)
•CS-MARS Recovery Software
•CS-MARS Upgrade Packages
Note If you are upgrading from a release earlier than those posted on CCO, please contact Cisco support for information on obtaining the required images. Do not attempt to skip releases along the upgrade path.
For information on obtaining a CCO account, see the following URL:
•http://www.cisco.com/web/siteassets/account/index.html
Documentation Errata
The Cisco Security MARS 6.x Documentation Guide and Warranty details user documentation for this release.
Important Notes
No important notes exist for the 6.1.2 upgrade.
Caveats
This section describes the open and resolved caveats with respect to this release.
For your convenience in locating caveats in Cisco's Bug Toolkit, the caveat titles listed in this section are drawn directly from the Bug Toolkit database. These caveat titles are not intended to be read as complete sentences because the title field length is limited. In the caveat titles, some truncation of wording or punctuation may be necessary to provide the most complete and concise description. The only modifications made to these titles are as follows:
•Commands are in boldface type.
•Product names and acronyms may be standardized.
•Spelling errors and typos may be corrected.
Note If you are a registered cisco.com user, view Bug Toolkit on cisco.com at the following website:
http://www.cisco.com/support/bugtools
To become a registered cisco.com user, go to the following website:
http://tools.cisco.com/RPF/register/register.do
This section contains the following topics:
•Open Caveats for Supporting Devices
•Open Caveats— Release 6.1.2
•Resolved Caveats —Release 6.1.2
•Resolved Caveats —Releases Prior to 6.1.1
Open Caveats for Supporting Devices
The following caveats affect this release and are part of supported devices or compatible products:
Reference Number
|
Description
|
Firewall Services Module
|
CSCsl27574
|
FWSM Syslog message FWSM-6-302013 with wrong Real and Mapped IP
|
Open Caveats— Release 6.1.2
The following caveats affect this release and are part of MARS.
Reference Number
|
Description
|
CSCsb77550
|
CSV-re import of CSA and Symantec agents unsuccessful
|
CSCsc90480
|
MARS Incident notification options are not configurable
|
CSCsd61749
|
pnrestore doesn't restore all of the system config
|
CSCsd84350
|
CS-MARS/CSM: Credentials change on CSM side not checked.
|
CSCsd89457
|
Incorrect handling of time range for rules that fire periodically.
|
CSCse10945
|
Summary Page Graphs Spontaneously Change Displayed Size (w/ multi-head)
|
CSCse31722
|
Cloud toggle only works on first page of reporting devices
|
CSCse42953
|
CS-Mars - unable to show L2 path when source and destination in same net
|
CSCse98029
|
Occasionally corrupted event data enters into MARS database
|
CSCsf99767
|
provide encoding selection for adding agent to device/host
|
CSCsf99844
|
wrong values for current connections using CLI "show resource usage"
|
CSCsg64119
|
rule's keyword editor treats NOT as binary rather than unary
|
CSCsg73786
|
Devices should not be added to MARS if Discovery is unsuccessful
|
CSCsh44351
|
CSM multiple hostname matches failed to return multiple hosts
|
CSCsh97060
|
MARs says it can delete up to 500 at a time but only lets you delete 50.
|
CSCsi18757
|
CS-MARS - Request to have the "ssldump" command in the MARS CLI.
|
CSCsi29398
|
CS-Mars does mitigate to the proper endpoint
|
CSCsi68126
|
For multiple context mode, inbound/outbound error reports are incorrect.
|
CSCsj15066
|
Report is not emailed because of Message exceeds maximum fixed size
|
CSCsj23845
|
CS-MARS Action filter doesn't work if not associated with incidents
|
CSCsk04282
|
MARS failed to import 1000 hosts vulnerablilty information
|
CSCsk27276
|
MARS: Isolated Networks in Topology due to 'ip unnumbered' Interface
|
CSCsl58216
|
MARS Layer 2 path and mitigation issues with IOS 12.3 and 12.4 version
|
CSCso01260
|
Loading hosts from seed file does not fill interface information on MARS
|
CSCso30992
|
entire GUI stops working after adding a device with same name as MARS
|
CSCso97681
|
Host name appears inconsistently on Incident Vector Topology
|
CSCsq57230
|
custom parser performance issue
|
CSCsq75966
|
Actual Time For 'pnexp' Or 'pnimp' Is Much Higher Than Estimated
|
CSCsr41052
|
MARS not showing the switches in L2 mitigation path consistently
|
CSCsu42351
|
MARS: Hotswap remove allows both disks in a redundant pair to be removed
|
CSCsv10459
|
Rawmsg retrieve Stop(from the GUI) does not stop backend immediately
|
CSCsv23244
|
Unable to edit Cisco Switch IOS event parser in 6.0.1 DSF feature.
|
CSCsv40163
|
MARS adding wrong device entry after adding ISS Provetia as ISS RS 7.0
|
CSCsv66667
|
MARS not printing the correct Layer 2 topology
|
CSCsw36540
|
CSM-MARS linkage is not working when AAA is configured as Authentication
|
CSCsw80468
|
Querying events filter by severity level not generating any reports
|
CSCsx01576
|
Unable to parse NAC 4.5
|
CSCsx48620
|
MARS 6.0.2 Issue with modifying user roles.
|
CSCsx51498
|
the deleted devices are still showing in the resource utilization report
|
CSCsx95786
|
User defined rule doesn't work for keyword with NOT condition
|
CSCsy45872
|
Unknown Device Event Type for ACS 4.2
|
CSCsz29163
|
CS-MARS Single Zone Report Showing Info from other Zones
|
CSCsz49880
|
Inactive rules becomes active after importing using DSF
|
CSCsz56227
|
Severity not evaluated/matched correctly for CSA and some IPS events
|
CSCsz78202
|
querying IPS events with prot:IP(SNMP traps) generates improper results
|
CSCsz84861
|
MARS - l2 path does not show stacked switches
|
CSCsz85334
|
Unable to update custom signature package with erroneous XML
|
CSCsz85727
|
wrong info on pop up while deleting a site on GC.
|
CSCta09391
|
CS-MARS-6.0-Filtering on Red severity slow and Oracle process 100%
|
CSCta49936
|
GC report with BTF site reference is always stays in progress.
|
CSCta74645
|
ASA site report takes a few seconds to display even on a non-busy box
|
CSCta96180
|
Invalid credential error if CCO passwd including URL special characters
|
CSCtb12268
|
DSF export/import feature for rules/report with sites is not working
|
CSCtb39169
|
MARS 6.0.x pulling of IDS 4.x sensors not working via rdep
|
CSCtb69227
|
CSM device causing query pink box
|
CSCtb92648
|
Custom column query with keyword doesn't return results
|
CSCtc25411
|
MARS: Oracle polling interval is ignored when connections are limited
|
CSCtc41072
|
Error messages can show up in upgrade log for duplicate Oracle entries
|
CSCtc41087
|
MARS does not validate the date on the IPS certificate
|
CSCtd10574
|
Severity not evaluated/matched correctly for CSA events.
|
CSCtd15002
|
CS-MARS: IOS IPS Sig 5733 Maps to "WWW IIS Internet Printing Overflow"
|
CSCte98430
|
Custom signatures not applied toward sensors configured as IPS 7.x
|
CSCtf18192
|
MARS cannot retreive AP hostname correctly via SNMP
|
CSCth36589
|
MARS parses SNMP traps incorrectly: Dynamically creates invalid Agents
|
CSCth96188
|
MARS custom parser for ACS 5.1 messages over-writes certain fields
|
Resolved Caveats —Release 6.1.2
The following customer found or previously release noted caveats have been resolved in this release.
Reference Number
|
Description
|
CSCtj33313
|
MARS - DOC - User management clarification
|
CSCtj26601
|
Pnparser crashes on parsing access-list
|
CSCti21501
|
CS-MARS 110R FIPS Card causes Delay in WebGUI
|
CSCtg80984
|
MARS Sends empty / blank / unknown SNMP community string
|
CSCtd02654
|
IMPORTANT TLS/SSL SECURITY UPDATE
|
CSCtc84782
|
MARS - Webagent perl script does not check existence of logfile
|
CSCtb25674
|
MARS - Inactive Reporting Devices creates false alerts for Snare Agents
|
Resolved Caveats —Releases Prior to 6.1.1
For the list of caveats resolved in releases prior to this one, see the following documents:
•http://www.cisco.com/en/US/products/ps6241/prod_release_notes_list.html
Product Documentation
For the complete list of documents supporting this release, see the release-specific document road map:
•Cisco Secure MARS Documentation Guide and Warranty
http://www.cisco.com/en/US/products/ps6241/products_documentation_roadmaps_list.html
Lists document set that supports the MARS release and summarizes contents of each document.
•For general product information, see:
http://www.cisco.com/go/mars
Note The Documentation Guide and Cisco.com link to the most recent Cisco Secure MARS publications. The release number for many documents may vary from the current release number.
Obtaining Documentation, Obtaining Support, and Security Guidelines
For information on obtaining documentation, obtaining support, providing documentation feedback, security guidelines, and also recommended aliases and general Cisco documents, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS Version 2.0.
Feedback
