Cisco Service Control Application for Broadband Download Guide, Release 3.6.6 and below

Available Languages

Download Options

  • PDF     (186.8 KB)
    View with Adobe Reader on a variety of devices
Updated:June 9, 2011

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Cisco Service Control Application for Broadband Download Guide

Table Of Contents

Cisco Service Control Application for Broadband Download Guide

Overview

Compatibility Matrix

Downloading Software

Obtaining Documentation and Submitting a Service Request


Cisco Service Control Application for Broadband Download Guide

Revised: June 6, 2011, OL-12774-18

1 Overview

The following instructions explain how to download the various components of the Service Control Solution from the Cisco software download center.

The Cisco Service Control Solution is composed out of several components that are available on the Cisco center for customer download. These components are:

•Cisco Service Control Application for Broadband (SCA BB)

•Cisco Service Control Operating System (SCOS)

•Cisco Service Control Collection Manager (SCMS CM)

•Cisco Service Control Subscriber Manager (SCMS SM)

Before downloading new software, refer to the "Compatibility Matrix" section below and read the release notes of the various components. The "Compatibility Matrix" section provides information regarding the compatibility between various Service Control components and versions. These guidelines must be adhered to when installing new software.

After you have downloaded the new software, see the Installation Guide located in the SCA BB package for a step-by-step description of how to install the solution.

2 Compatibility Matrix

Table 1 provides compatibility information for the various components of the Service Control Solution for the 3.x release train and Table 2 provides compatibilty information for the various components of the Service Control Solution for the 2.x release train. For each SCA BB revision, the list of compatible versions of the SCOS, SCMS CM, SCA Reporter and SCMS SM are listed.

We recommend using the latest revision available for each category unless otherwise noted.

Note Users working in Hybrid topology (SCE8000 together with SCE 2000 running a version lower then 3.1.6) require two different SCA-BB consoles.

Note The Cisco SCE8000-32xGBE is only supported in cascade topology.

Table 1 SCA BB 3.x Release Train 

 
HW Platforms
SCOS
SCMS CM
SCMS SM
SCA Reporter
Insight

SCA BB 3.6.5

SCE-1010-2XGBE

SCE-2020-4XGBE

SCE8000-4xTGBE

SCE8000-2xTGBE

SCE8000-8xGBE

SCE8000-8xGBE + 1xTGBE

SCE8000-16xGBE

SCE8000-16xGBE + 2xTGBE

SCE8000-32xGBE1

SCE8000-Dual DPI

3.6.6

3.5.5

3.6.0

3.6.5

3.5.5

3.6.0

3.6.5

3.6.5

Insight V1

Insight V2

SCA BB 3.6.5

SCE-1010-2XGBE

SCE-2020-4XGBE

SCE8000-4xTGBE

SCE8000-2xTGBE

SCE8000-8xGBE

SCE8000-8xGBE + 1xTGBE

SCE8000-16xGBE

SCE8000-16xGBE + 2xTGBE

SCE8000-32xGBE1

SCE8000-Dual DPI

3.6.5

3.5.5

3.6.0

3.6.5

3.5.5

3.6.0

3.6.5

3.6.5

Insight V1

Insight V2

SCA BB 3.6.0
Build 454

SCE-1010-2XGBE

SCE-2020-4XGBE

SCE8000-4xTGBE

SCE8000-2xTGBE

SCE8000-8xGBE

SCE8000-8xGBE + 1xTGBE

SCE8000-16xGBE

SCE8000-16xGBE + 2xTGBE

SCE8000-32xGBE1

SCE8000-Dual DPI

3.6.1

3.5.5

3.6.0

3.5.5

3.6.0

3.6.0

Also packaged with SCA BB Console

—

SCA BB 3.6.0

SCE-1010-2XGBE

SCE-2020-4XGBE

SCE8000-4xTGBE

SCE8000-2xTGBE

SCE8000-8xGBE

SCE8000-8xGBE + 1xTGBE

SCE8000-16xGBE

SCE8000-16xGBE + 2xTGBE

SCE8000-32xGBE1

SCE8000-Dual DPI

3.6.0

3.5.5

3.6.0

3.5.5

3.6.0

3.6.0

Also packaged with SCA BB Console

—

SCA BB 3.5.5

SCE-1010-2xGBE 2U

SCE-2020-4xGBE

SCE8000-2xTGBE

SCE8000-4xTGBE

SCE8000-8xGBE

SCE8000-8xGBE + 1xTGBE

SCE8000-16xGBE

SCE8000-16xGBE + 2xTGBE

3.5.5

3.5.5

3.5.0

3.1.6

3.5.5

3.5.0

3.1.6

3.5.5

Also packaged with SCA BB Console

—

SCA BB 3.5.0

SCE-1010-2xGBE 2U

SCE-2020-4xGBE

SCE8000-2xTGBE

SCE8000-4xTGBE

3.5.0

3.5.5

3.5.0

3.1.6

3.5.5

3.5.0

3.1.6

3.5.0

Also packaged with SCA BB Console

—

SCA BB .3.1.7

SCE-1010-2xGBE 2U

SCE-2020-4xGBE

SCE8000-2xTGBE

SCE8000-4xTGBE

3.1.7

3.5.5

3.5.0

3.1.6

3.5.5

3.5.0

3.1.6

3.1.6

Also packaged with SCA BB Console

—

SCA BB 3.1.6

(PQI 3.1.6S)

SCE8000-2xTGBE

SCE8000-4xTGBE

3.1.6S

3.5.5

3.5.0

3.1.6

3.5.5

3.5.0

3.1.6

3.1.6

Also packaged with SCA BB Console

—

SCA BB 3.1.6

SCE-1010-2xGBE 2U

SCE-2020-4xGBE

SCE-2020-4/8xFE

3.1.6

3.5.5

3.5.0

3.1.6

3.5.5

3.5.0

3.1.6

3.1.6

Also packaged with SCA BB Console

—

SCA BB 3.1.5

SCE-1010-2xGBE 2U

SCE-2020-4xGBE

SCE-2020-4/8xFE

3.1.5

3.0.32

3.0.5

3.0.6

3.1.03

3.1.53

3.1.63

3.5.0

3.1.0

3.1.1

3.1.5

3.1.6

3.5.0

3.1.5

Also packaged with SCA BB Console

—

SCA BB 3.1.1

SCE-1010-2xGBE 2U

SCE-2020-4xGBE

SCE-2020-4/8xFE

3.1.1

3.0.32

3.0.5

3.0.6

3.1.03

3.1.53

3.1.63

3.5.0

3.1.0

3.1.1

3.1.5

3.1.6

3.5.0

3.1.0

Also packaged with SCA BB Console

—

SCA BB 3.1.0

SCE-1010-2xGBE 2U

SCE-2020-4xGBE

SCE-2020-4/8xFE

3.1.0

3.0.32

3.0.5

3.0.6

3.1.03

3.1.53

3.1.0

3.1.1

3.1.5

3.1.0

Also packaged with SCA BB Console

—

SCA BB 3.0.6

SCE-1010-2xGBE 2U

SCE-1010-2xGBE 1.5U

SCE-2020-4xGBE

SCE-2020-4/8xFE

3.0.6

3.0.0

3.0.32

3.0.5

3.0.6

3.1.0

3.1.53

3.0.34

3.0.5

3.0.65

3.0.6A

3.1.0

3.1.1

3.1.5

3.0.5

Also packaged with SCA BB Console

—

SCA BB 3.0.5A

SCE-1010-2xGBE 2U

SCE-1010-2xGBE 1.5U

SCE-2020-4xGBE

SCE-2020-4/8xFE

3.0.5

3.0.0

3.0.32

3.0.5

3.0.6

3.1.0

3.1.53

3.0.34

3.0.5

3.0.65

3.0.6A

3.1.0

3.1.1

3.1.5

3.0.5

Also packaged with SCA BB Console

—

SCA BB 3.0.4

SCE-1010-2xGBE 2U

SCE-1010-2xGBE 1.5U

SCE-2020-4xGBE

SCE-2020-4/8xFE

3.0.4

3.0.0

3.0.32

3.0.5

3.0.6

3.1.0

3.0.0

3.0.1

3.0.34,6

3.0.5

3.0.65

3.0.6A

3.1.0

3.0.3

Also packaged with SCA BB Console

—

SCA BB 3.0.3

SCE-1010-2xGBE 2U

SCE-1010-2xGBE 1.5U

SCE-2020-4xGBE

SCE-2020-4/8xFE

3.0.3

3.0.0

3.0.32

3.0.5

3.0.6

3.1.0

3.0.0

3.0.1

3.0.34

3.0.5

3.0.65

3.0.6A

3.1.0

3.0.3

Also packaged with SCA BB Console

—

SCA BB 3.0.1

SCE-1010-2xGBE 2U

SCE-1010-2xGBE 1.5U

SCE-2020-4xGBE

SCE-2020-4/8xFE

3.0.1

3.0.0

3.0.0

3.0.1

3.0.34,6

3.0.0

Also packaged with SCA BB Console

—

SCA BB 3.0.0

SCE-1010-2xGBE 2U

SCE-1010-2xGBE 1.5U

SCE-2020-4xGBE

SCE-2020-4/8xFE

3.0.0

3.0.0

3.0.0

3.0.34,6

3.0.6A

3.0.0

Also packaged with SCA BB Console

—

1 Only supported in cascade topology.

2 VoIP reporting capabilities are only supported with CM 3.0.3 and up.

3 Virtual Links reporting capabilities are only supported with CM 3.1.0 or higher.

4 Use SCMS-SM 3.0.3 patch for SM-cluster upgrades from SM3.0.x to SM3.0.3.

5 Legacy support only (replaced by 3.0.6A).

6 Using releases SCMS-SM 3.0.3 and up is recommended for these SCA BB releases due to a known limitation of previous SCMS-SM versions. See details of resolved issue CSCsd93885 in the SCMS-SM release notes.


*

Table 2 SCA BB 2.x Release Train 

 
HW Platforms
SCOS
SCMS CM
SCMS SM
SCA Reporter

SCA BB 2.5.10

SCE-1010-2xGBE 2U

SCE-2020-4xGBE

SCE-2020-4/8xFE

2.5.10

2.5.5

2.5.8

2.5.5

2.5.6

2.5.7

2.5.7A

2.5.8

3.0.61

3.0.6A

2.5.5

SCA BB 2.5.9

SCE-1010-2xGBE 2U

SCE-2020-4xGBE

SCE-2020-4/8xFE

2.5.9

2.5.5

2.5.8

2.5.5

2.5.6

2.5.7

2.5.8

2.5.5

SCA BB 2.5.8

SCE-1010-2xGBE 2U

SCE-2020-4xGBE

SCE-2020-4/8xFE

2.5.8

2.5.5

2.5.8

2.5.5

2.5.6

2.5.7

2.5.8

2.5.5

SCA BB 2.5.7

SCE-1010-2xGBE 2U

SCE-2020-4xGBE

SCE-2020-4/8xFE

2.5.7

2.5.5

2.5.2

2.5.5

2.5.6

2.5.7

2.5.8

2.5.5

SCA BB 2.5.6

SCE-1010-2xGBE 2U

SCE-1010-2xGBE 1.5U

SCE-2020-4xGBE

2.5.6,

2.5.5

2.5.5

2.5.2

2.5.5

2.5.6

2.5.7

2.5.8

2.5.5

SCA BB 2.5.5

SCE-1010-2xGBE 2U

SCE-1010-2xGBE 1.5U

SCE-2020-4xGBE

2.5.5

2.5.5

2.5.2

2.5.5

2.5.7

2.5.5

SCA BB 2.5.2

SCE-1010-2xGBE 2U

SCE-1010-2xGBE 1.5U

SCE-2020-4xGBE

2.5.2

2.5.1

2.5.5

2.5.2

2.5.5

2.5

SCA BB 2.1.8

SCE-1010-2xGBE 2U

SCE-1010-2xGBE 1.5U

SCE-2020-4xGBE

2.1.8

2.0

2.5.1

2.0.3

2.2.1

2.1

1 Legacy support only (replaced by 3.0.6A).


3 Downloading Software

Table 3 summarizes the contents of each software package.

Table 3 Software Package Contents Summary 

Software
Package
Content
Download Directory
Comment
SCA BB

•SCE Loadable Image (SCE PQI)

•SM Loadable Image (SM PQI)

•Client Software (Console, Reporter, & Command line utilities)

•Service Configuration API

•Quota Provisioning API *

http://www.cisco.com/cgi-bin/tablebuild.pl/scasbb

MIB files for release 3.0.3 and up can be downloaded from ftp://ftp.cisco.com/pub/mibs/

* Starting with release 3.0, QP-API is part of the SCE Subscriber API.

SCOS

•PKG File for each platform

•Image file

•Image used for bootrom upgrades

•FPGA and PROM files

•Configuration files

•EM Agent installation files

•Prior to SCOS Rel 3.1.7:

http://www.cisco.com/cgi-bin/tablebuild.pl/scos

•SCOS Rel 3.1.7 and up:

http://www.cisco.com/cgi-bin/tablebuild.pl/scos-cr

MIB files for release 3.0.3 and up can be downloaded from ftp://ftp.cisco.com/pub/mibs/

SCMS SM

Release 2.x

•SM distribution

•SM installation scripts

•SM API (C & Java)

•LEGs:

–RDR DHCP LEG

–DHCP lease query LEG

–CNR LEG

•SM Veritas agents

http://www.cisco.com/cgi-bin/tablebuild.pl/scsm

SCMS SM 2.x distribution is split into several parts in the CCO. Refer to readme.txt file (located in download directory) for a description of how to merge the distribution.

SCMS SM

Release 3.x

•SM distributions (Solaris\Red-Hat Linux):

•SM server

•SM installation scripts

•Veritas Cluster Agents

•RADIUS Listener

•SM API (C & Java)

•SCE Subscriber API

•LEGs:

–SCE-Sniffer DHCP LEG

–SCE-Sniffer RADIUS LEG

–DHCP lease query LEG

–CNR LEG

–MPLS-VPN BGP LEG

http://www.cisco.com/cgi-bin/tablebuild.pl/scsm

—

SCMS CM

• CMS CM + Sybase software for Solaris

•SCMS CM + Sybase software for Linux

•SCMS CM for Solaris/Linux

http://www.cisco.com/cgi-bin/tablebuild.pl/sccm

SCMS CM distribution is split into several parts in the CCO. Refer to the readme.txt file (located in download directory) for a description of how to merge the distribution

SCA Reporter

Client software for MS-Windows, and command-line installer package for Redhat Linux

http://www.cisco.com/cgi-bin/tablebuild.pl/scasbb

 

4 Obtaining Documentation and Submitting a Service Request

For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:

http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html

Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS Version 2.0.

Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco's trademarks can be found at www.cisco.com/go/trademarks. Third party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1005R)

Was this Document Helpful?

FeedbackFeedback

Contact Cisco