RADIUS avançado para clientes PPP de discagem

version 11.2
service timestamps debug datetime msec
service timestamps log uptime
service password-encryption
no service udp-small-servers
no service tcp-small-servers
!
hostname nasX
!
aaa new-model
aaa authentication login default radius local
aaa authentication login no_radius enable
aaa authentication ppp default if-needed radius
aaa authorization network radius
aaa accounting exec start-stop radius
aaa accounting network start-stop radius
!
enable password cisco
!
username cisco password letmein
ip subnet-zero
no ip domain-lookup
ip name-server 10.6.1.1
async-bootp dns-server 10.1.1.3
async-bootp nbns-server 10.1.1.24
!
interface Ethernet0/0
 ip address 10.1.1.21 255.255.255.0
 no keepalive
!
interface Serial0/0
 no ip address
 shutdown
!
interface Ethernet0/1
 no ip address
 shutdown
!
interface Serial1/0
 physical-layer async
 no ip address
 encapsulation ppp
 async default routing
 async mode interactive
 dialer in-band
 dialer rotary-group 0
 no cdp enable
!
interface Serial1/1
 physical-layer async
 no ip address
 encapsulation ppp
 async default routing
 async mode interactive
 dialer in-band
 dialer rotary-group 0
 no cdp enable
!
interface Serial1/2
 physical-layer async
 no ip address
 encapsulation ppp
 async default routing
 async mode interactive
 dialer in-band
 dialer rotary-group 0
 no cdp enable
!
interface Serial1/3
 physical-layer async
 no ip address
 encapsulation ppp
 async default routing
 async mode interactive
 dialer in-band
 dialer rotary-group 0
 no cdp enable
!
interface Serial1/4
 physical-layer async
 no ip address
 encapsulation ppp
 async default routing
 async mode interactive
 dialer in-band
 dialer rotary-group 0
 no cdp enable
!
interface Serial1/5
 physical-layer async
 no ip address
 encapsulation ppp
 async default routing
 async mode interactive
 dialer in-band
 dialer rotary-group 0
 no cdp enable
!
interface Serial1/6
 physical-layer async
 no ip address
 encapsulation ppp
 async default routing
 async mode interactive
 dialer in-band
 dialer rotary-group 0
 no cdp enable
!
interface Serial1/7
 physical-layer async
 no ip address
 encapsulation ppp
 async default routing
 async mode interactive
 dialer in-band
 dialer rotary-group 0
 no cdp enable
!
interface Dialer0
 ip unnumbered Ethernet0/0
 ip tcp header-compression passive
 encapsulation ppp
 peer default ip address pool Cisco3640-Group-120
 dialer in-band
 dialer-group 1
 no cdp enable
 ppp authentication pap
!
router rip
 version 2
 redistribute connected
 network 10.1.1.0
 no auto-summary
!
ip local pool Cisco3640-Group-120 10.1.1.80 10.1.1.88
no ip classless
ip http server
!
dialer-list 1 protocol ip permit
dialer-list 1 protocol appletalk permit
!

!--- The following two lines are for the RADIUS server; the first is for the !--- RADIUS being used for authentication but not accounting. In the second, !--- accounting information is sent, too, but not authenticating. !--- If you wish accounting to go to the first, change the 0 to 1646.

!
radius-server host 10.1.1.3 auth-port 1645 acct-port 0
radius-server host 10.1.1.5 auth-port 0 acct-port 1646
radius-server key cisco
!
line con 0
 exec-timeout 0 0
 login authentication no_radius
line 17 24
 autoselect during-login
 autoselect ppp
 modem InOut
 transport input all
 stopbits 1
 speed 57600
 flowcontrol hardware
line aux 0
line vty 0 4
 exec-timeout 0 0
end

!--- Note: This assumes Livingston RADIUS.

# Handshake with router--router needs "radius-server key cisco":
10.1.1.21 cisco

!--- Note: This assumes Livingston RADIUS.

# User who can telnet in to configure:
admin Password = "admin"
User-Service-Type = Login-User
# ppp/chap authentication line 1 - password must be cleartext per chap spec
#
# This user gets an IP address from a pool on the router.
chapuser Password = "chapuser"
User-Service-Type = Framed-User,
Framed-Protocol = PPP
# ppp/chap authentication line 1 - password must be cleartext per chap spec
#
# This user has a statically assigned IP address
chapadd Password = "chapadd"
User-Service-Type = Framed-User,
Framed-Protocol = PPP,
Framed-Address = 10.10.10.10