Cisco IOS-Router - Konfigurieren von EzVPN mit NEM

Download-Optionen

  • PDF     (331.3 KB)
    Mit Adobe Reader auf verschiedenen Geräten anzeigen
  • ePub     (102.3 KB)
    In verschiedenen Apps auf iPhone, iPad, Android, Sony Reader oder Windows Phone anzeigen
  • Mobi (Kindle)     (120.7 KB)
    Auf einem Kindle-Gerät oder einer Kindle-App auf mehreren Geräten anzeigen
Aktualisiert:13. April 2009
Dokument-ID:69352

Inklusive Sprache

In dem Dokumentationssatz für dieses Produkt wird die Verwendung inklusiver Sprache angestrebt. Für die Zwecke dieses Dokumentationssatzes wird Sprache als „inklusiv“ verstanden, wenn sie keine Diskriminierung aufgrund von Alter, körperlicher und/oder geistiger Behinderung, Geschlechtszugehörigkeit und -identität, ethnischer Identität, sexueller Orientierung, sozioökonomischem Status und Intersektionalität impliziert. Dennoch können in der Dokumentation stilistische Abweichungen von diesem Bemühen auftreten, wenn Text verwendet wird, der in Benutzeroberflächen der Produktsoftware fest codiert ist, auf RFP-Dokumentation basiert oder von einem genannten Drittanbieterprodukt verwendet wird. Hier erfahren Sie mehr darüber, wie Cisco inklusive Sprache verwendet.

Informationen zu dieser Übersetzung

Cisco hat dieses Dokument maschinell übersetzen und von einem menschlichen Übersetzer editieren und korrigieren lassen, um unseren Benutzern auf der ganzen Welt Support-Inhalte in ihrer eigenen Sprache zu bieten. Bitte beachten Sie, dass selbst die beste maschinelle Übersetzung nicht so genau ist wie eine von einem professionellen Übersetzer angefertigte. Cisco Systems, Inc. übernimmt keine Haftung für die Richtigkeit dieser Übersetzungen und empfiehlt, immer das englische Originaldokument (siehe bereitgestellter Link) heranzuziehen.

Einleitung

Dieses Dokument enthält eine Beispielkonfiguration für IPsec zwischen einem Cisco 871 Router und einem Cisco 7200VXR Router unter Verwendung von Easy VPN (EzVPN). Der 7200 fungiert als Easy VPN-Server und der 871 als Easy VPN Remote. In diesem Beispiel werden die Loopback-Schnittstellen auf beiden Routern als private Netzwerke verwendet. Diese können nach Bedarf durch andere Schnittstellen wie FastEthernet oder serielle Schnittstellen ersetzt werden.

Informationen zur Konfiguration von IPsec zwischen einem PIX/ASA 7.x und einem Cisco 871 Router mithilfe von Easy VPN finden Sie unter PIX/ASA 7.x Easy VPN mit einer ASA 5500 als Server und Cisco 871 als Easy VPN Remote-Konfigurationsbeispiel.

Informationen zur Konfiguration von IPsec zwischen dem Cisco IOS® Easy VPN Remote Hardware Client und dem PIX Easy VPN Server finden Sie unter IOS Easy VPN Remote Hardware Client to a PIX Easy VPN Server Configuration Example.

Informationen zum Konfigurieren eines Cisco IOS-Routers als EzVPN im Network Extension Mode (NEM) für die Verbindung mit einem Cisco VPN 3000 Concentrator finden Sie unter Konfigurieren des Cisco EzVPN-Clients auf Cisco IOS mit dem VPN 3000 Concentrator.

Voraussetzungen

Anforderungen

Stellen Sie sicher, dass Sie über grundlegende Kenntnisse zu IPsec und den Cisco 7200/871-Betriebssystemen verfügen, bevor Sie diese Konfiguration durchführen.

Verwendete Komponenten

Die Informationen in diesem Dokument basierend auf folgenden Software- und Hardware-Versionen:

  • Cisco Easy VPN Server ist ein 7200 Router (VXR), auf dem die Cisco IOS® Software, Version 12.4(4)T1, ausgeführt wird.

  • Cisco Easy VPN Remote ist ein 871W-Router mit Cisco IOS Software, Version 12.4(2)T1

Die Informationen in diesem Dokument beziehen sich auf Geräte in einer speziell eingerichteten Testumgebung. Alle Geräte, die in diesem Dokument benutzt wurden, begannen mit einer gelöschten (Nichterfüllungs) Konfiguration. Wenn Ihr Netz Live ist, überprüfen Sie, ob Sie die mögliche Auswirkung jedes möglichen Befehls verstehen.

Konventionen

Weitere Informationen zu Dokumentkonventionen finden Sie unter Cisco Technical Tips Conventions (Technische Tipps von Cisco zu Konventionen).

Konfigurieren

In diesem Abschnitt erfahren Sie, wie Sie die in diesem Dokument beschriebenen Funktionen konfigurieren können.

Hinweis: Verwenden Sie das Tool für die Suche nach Befehlen (nur für registrierte Kunden), um weitere Informationen zu den in diesem Dokument verwendeten Befehlen zu erhalten.

Netzwerkdiagramm

In diesem Dokument wird die folgende Netzwerkeinrichtung verwendet:

easyvpn-7200svr-871remote-1.gif

Hinweis: Loopback-Schnittstellen simulieren die internen PCs.

Konfigurationen

In diesem Dokument werden folgende Konfigurationen verwendet:

Easy VPN-Server (Cisco 7200VXR-Router) 
3-07-07-7200VXR#show running-config
Building configuration...

Current configuration : 2059 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname 3-07-07-7200VXR
!
boot-start-marker
boot-end-marker
!
!

!--- Enable Authentication, Authorizing and Accounting (AAA) !--- for user authentication and group authorization.

aaa new-model
!


!--- Enable the AAA commands in order !--- to enable Xauth for user authentication.

aaa authentication login userauthen local


!--- Enable the AAA commands !--- in order to enable group authorization.

aaa authorization network groupauthor local
!
aaa session-id common
!
resource policy
!
ip subnet-zero
ip cef
!
!

!--- Define the username and password to use for Xauth.

username cisco password 0 cisco123
!
!

!--- Create an Internet Security Association and !--- Key Management Protocol (ISAKMP) policy for Phase 1 negotiations.

crypto isakmp policy 3
 encr 3des
 authentication pre-share
 group 2
!
!

!--- Create a group with the pre-shared key for IKE authentication.

crypto isakmp client configuration group vpngrp
 key cisco123
!
!

!--- Create the Phase 2 policy for actual data encryption.

crypto ipsec transform-set myset esp-3des esp-sha-hmac
!


!--- Create a dynamic map and !--- apply the transform set that was created earlier.

crypto dynamic-map dynmap 10
 set transform-set myset
!
!

!--- Create the actual crypto map, !--- and apply the AAA lists that were created earlier. !--- These commands associate the AAA commands to the crypto map.

crypto map clientmap client authentication list userauthen
crypto map clientmap isakmp authorization list groupauthor
crypto map clientmap 10 ipsec-isakmp dynamic dynmap
!
!
!
interface Loopback10
 ip address 10.10.10.1 255.255.255.0
!
interface GigabitEthernet0/1
 ip address 158.100.101.254 255.255.255.0
 ip nat inside
 ip virtual-reassembly
 duplex auto
 speed auto
 media-type rj45
 no negotiation auto
!
interface GigabitEthernet0/2
 ip address 158.100.102.254 255.255.255.0
 ip nat outside
 ip virtual-reassembly
 duplex auto
 speed 100
 media-type rj45
 no negotiation auto
!
!
!

!--- Apply the crypto map on the interface where !--- traffic leaves the router.

interface GigabitEthernet0/3
 ip address 172.16.186.186 255.255.255.0
 duplex auto
 speed auto
 media-type rj45
 no negotiation auto
 crypto map clientmap
!
interface FastEthernet1/0
 no ip address
 shutdown
 duplex half
!
ip default-gateway 172.16.186.1
ip classless
ip route 0.0.0.0 0.0.0.0 172.16.186.1
no ip http server
no ip http secure-server
!
!
ip nat Stateful id 10
ip nat pool honnat 158.100.96.90 158.100.96.99 netmask 255.255.255.0
ip nat inside source route-map test pool honnat mapping-id 10 overload
!
logging alarm informational
access-list 100 permit ip any any
!
route-map test permit 10
 match ip address 100
!
!
!
!
control-plane
!
!
!
!
!
!
gatekeeper
 shutdown
!
!
line con 0
 logging synchronous
 stopbits 1
line aux 0
 stopbits 1
line vty 0 4
!
!
end

Easy VPN Remote (Cisco 871W Router) 
3-03-06-871W#show running-config
Current configuration : 1563 bytes
!
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname 3-03-06-871W
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
!
resource policy
!
ip cef
!
!
!
!
ip name-server 171.70.168.183
!
!
username cisco privilege 15 password 7 00071A150754
!
!
!
!

!--- Set the parameters to connect to the !--- appropriate Easy VPN group on the Easy VPN server.

crypto ipsec client ezvpn ez
 connect auto
 group vpngrp key cisco123
 mode network-extension
 peer 172.16.186.186
 xauth userid mode interactive
!
!
!

!--- Define the inside interfaces that will access !--- and can be accessed via Easy VPN.

interface Loopback0
 ip address 10.12.130.1 255.255.255.255
 crypto ipsec client ezvpn ez inside
!
interface FastEthernet0
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3


!--- Use the crypto ipsec client ezvpn 
            command on the !--- interface that connects to the Easy VPN server !--- in order to complete the Easy VPN.


interface FastEthernet4
 ip address 172.16.186.130 255.255.255.0
 duplex auto
 speed auto
 crypto ipsec client ezvpn ez
!
interface Dot11Radio0
 no ip address
 shutdown
 speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
 station-role root
!
interface Vlan1
 no ip address
!
ip default-gateway 172.16.186.1
ip route 0.0.0.0 0.0.0.0 172.16.186.1
!
!
no ip http server
no ip http secure-server
!
access-list 121 dynamic testlist permit tcp any host 12.12.12.12 eq 5900
snmp-server community presto RW
!
!
!
route-map polo permit 10
!
route-map asa permit 10
!
tacacs-server host 66.94.234.13
tacacs-server directed-request
!
control-plane
!
!
line con 0
 no modem enable
line aux 0
line vty 0 4
 login
!
scheduler max-task-time 5000
!
webvpn context Default_context
 ssl authenticate verify all
 !
 no inservice
!
end

Überprüfung

Überprüfen Sie anhand dieser Abschnitte, ob Ihre Konfiguration ordnungsgemäß funktioniert.

Das Output Interpreter-Tool (OIT) (nur registrierte Kunden) unterstützt bestimmte show-Befehle. Verwenden Sie das OIT, um eine Analyse der show-Befehlsausgabe anzuzeigen.

Cisco 7200 Easy VPN Server: Befehle und Beispielausgabe

  • show crypto isakmp sa: Zeigt alle aktuellen Internet Key Exchange (IKE)-Sicherheitszuordnungen (SA) auf einem Peer an. 

    3-07-07-7200VXR#show crypto isakmp sa
IPv4 Crypto ISAKMP SA
dst             src             state          conn-id slot status
172.16.186.186  172.16.186.130  QM_IDLE           1008    0 ACTIVE

IPv6 Crypto ISAKMP SA

  • show crypto ipsec sa: Zeigt IPsec-SAs an, die zwischen Peers erstellt wurden. 

    3-07-07-7200VXR#show crypto ipsec sa

interface: GigabitEthernet0/3
    Crypto map tag: clientmap, local addr 172.16.186.186

   protected vrf: (none)
   local  ident (addr/mask/prot/port): (0.0.0.0/0.0.0.0/0/0)
   remote ident (addr/mask/prot/port): (10.12.130.1/255.255.255.255/0/0)
   current_peer 172.16.186.130 port 500
     PERMIT, flags={}
    #pkts encaps: 5, #pkts encrypt: 5, #pkts digest: 5
    #pkts decaps: 5, #pkts decrypt: 5, #pkts verify: 5
    #pkts compressed: 0, #pkts decompressed: 0
    #pkts not compressed: 0, #pkts compr. failed: 0
    #pkts not decompressed: 0, #pkts decompress failed: 0
    #send errors 0, #recv errors 0

     local crypto endpt.: 172.16.186.186, remote crypto endpt.: 172.16.186.130
     path mtu 1500, ip mtu 1500
     current outbound spi: 0x29354010(691355664)

     inbound esp sas:
      spi: 0x6875F644(1752561220)
        transform: esp-3des esp-sha-hmac ,
        in use settings ={Tunnel, }
        conn id: 11, flow_id: SW:11, crypto map: clientmap
        sa timing: remaining key lifetime (k/sec): (4439946/3526)
        IV size: 8 bytes
        replay detection support: Y
        Status: ACTIVE

     inbound ah sas:

     inbound pcp sas:

     outbound esp sas:
      spi: 0x29354010(691355664)
        transform: esp-3des esp-sha-hmac ,
        in use settings ={Tunnel, }
        conn id: 12, flow_id: SW:12, crypto map: clientmap
        sa timing: remaining key lifetime (k/sec): (4439946/3524)
        IV size: 8 bytes
        replay detection support: Y
        Status: ACTIVE

Cisco 871W Easy VPN Remote Show-Befehle und -Beispielausgabe

  • show crypto isakmp sa: Zeigt alle aktuellen IKE-SAs auf einem Peer an. 

    3-03-06-871W#show crypto isakmp sa
IPv4 Crypto ISAKMP SA
dst             src             state          conn-id slot status
172.16.186.186  172.16.186.130  QM_IDLE           2003    0 ACTIVE

IPv6 Crypto ISAKMP SA

  • show crypto ipsec sa: Zeigt IPsec-SAs an, die zwischen Peers erstellt wurden. 

    3-03-06-871W#show crypto ipsec sa
interface: FastEthernet4
    Crypto map tag: FastEthernet4-head-0, local addr 172.16.186.130

   protected vrf: (none)
   local  ident (addr/mask/prot/port): (10.12.130.1/255.255.255.255/0/0)
   remote ident (addr/mask/prot/port): (0.0.0.0/0.0.0.0/0/0)
   current_peer 172.16.186.186 port 500
     PERMIT, flags={origin_is_acl,}
    #pkts encaps: 5, #pkts encrypt: 5, #pkts digest: 5
    #pkts decaps: 5, #pkts decrypt: 5, #pkts verify: 5
    #pkts compressed: 0, #pkts decompressed: 0
    #pkts not compressed: 0, #pkts compr. failed: 0
    #pkts not decompressed: 0, #pkts decompress failed: 0
    #send errors 0, #recv errors 0

     local crypto endpt.: 172.16.186.130, remote crypto endpt.: 172.16.186.186
     path mtu 1500, ip mtu 1500
     current outbound spi: 0x6875F644(1752561220)

     inbound esp sas:
      spi: 0x29354010(691355664)
        transform: esp-3des esp-sha-hmac ,
        in use settings ={Tunnel, }
        conn id: 11, flow_id: Motorola SEC 1.0:11, crypto map: FastEthernet4-head-0
        sa timing: remaining key lifetime (k/sec): (4607687/3531)
        IV size: 8 bytes
        replay detection support: Y
        Status: ACTIVE

     inbound ah sas:

     inbound pcp sas:

     outbound esp sas:
      spi: 0x6875F644(1752561220)
        transform: esp-3des esp-sha-hmac ,
        in use settings ={Tunnel, }
        conn id: 12, flow_id: Motorola SEC 1.0:12, crypto map: FastEthernet4-head-0
        sa timing: remaining key lifetime (k/sec): (4607687/3528)
        IV size: 8 bytes
        replay detection support: Y
        Status: ACTIVE

     outbound ah sas:

     outbound pcp sas:

  • show crypto ipsec client ezvpn: Zeigt die Cisco Easy VPN Remote-Konfiguration an. 

    3-03-06-871W#show crypto ipsec client ezvpn
Easy VPN Remote Phase: 6

Tunnel name : ez
Inside interface list: Loopback0
Outside interface: FastEthernet4
Current State: IPSEC_ACTIVE
Last Event: SOCKET_UP
Save Password: Disallowed
Current EzVPN Peer: 172.16.186.186

3-03-06-871W#ping 10.10.10.1 source 10.12.130.1

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.10.10.1, timeout is 2 seconds:
Packet sent with a source address of 10.12.130.1
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms

Fehlerbehebung

Verwenden Sie diesen Abschnitt, um Probleme mit Ihrer Konfiguration zu beheben.

Das Output Interpreter-Tool (OIT) (nur registrierte Kunden) unterstützt bestimmte show-Befehle. Verwenden Sie das OIT, um eine Analyse der show-Befehlsausgabe anzuzeigen.

Hinweis: Lesen Sie den Artikel Important Information on Debug Commands (Wichtige Informationen zu Debug-Befehlen), bevor Sie debug-Befehle verwenden.

Wenn Sie den Easy VPN Remote- und Easy VPN-Server wie in diesem Dokument beschrieben eingerichtet haben und weiterhin Probleme auftreten, sammeln Sie die Debug-Ausgabe von jedem Gerät und die Ausgabe der show-Befehle zur Analyse durch den technischen Support von Cisco.

In diesen Abschnitten werden Debugbefehle und Beispielausgaben angezeigt:

Easy VPN-Serverbefehle

  • debug crypto ipsec: Zeigt die IPsec-Aushandlungen von Phase 2 an.

  • debug crypto isakmp: Zeigt die ISAKMP-Aushandlungen von Phase 1 an. 

3-07-07-7200VXR#debug crypto ipsec
3-07-07-7200VXR#debug crypto isakmp
*May  4 00:44:19.389: IPSEC(key_engine): got a queue event with 1 KMI message(s)
*May  4 00:44:20.937: ISAKMP (0:0): received packet from 172.16.186.130 dport 
                      500 sport 500 Global (N) NEW SA
*May  4 00:44:20.937: ISAKMP: Created a peer struct for 172.16.186.130, peer port 500
*May  4 00:44:20.937: ISAKMP: New peer created peer = 0x6745B8E0 
                      peer_handle = 0x80000009
*May  4 00:44:20.937: ISAKMP: Locking peer struct 0x6745B8E0, refcount 1 
                      for crypto_isakmp_process_block
*May  4 00:44:20.937: ISAKMP:(0):Setting client config settings 6741FF98
*May  4 00:44:20.937: ISAKMP:(0):(Re)Setting client xauth list  and state
*May  4 00:44:20.937: ISAKMP/xauth: initializing AAA request
*May  4 00:44:20.937: ISAKMP: local port 500, remote port 500
*May  4 00:44:20.937: ISAKMP: Find a dup sa in the avl tree during 
                      calling isadb_insert sa = 67369734
*May  4 00:44:20.937: ISAKMP:(0): processing SA payload. message ID = 0
*May  4 00:44:20.937: ISAKMP:(0): processing ID payload. message ID = 0
*May  4 00:44:20.937: ISAKMP (0:0): ID payload
        next-payload : 13
        type         : 11
        group id     : vpngrp
        protocol     : 17
        port         : 0
        length       : 14
*May  4 00:44:20.937: ISAKMP:(0):: peer matches *none* of the profiles
*May  4 00:44:20.937: ISAKMP:(0): processing vendor id payload
*May  4 00:44:20.937: ISAKMP:(0): vendor ID seems Unity/DPD but major 245 mismatch
*May  4 00:44:20.937: ISAKMP (0:0): vendor ID is NAT-T v7
*May  4 00:44:20.937: ISAKMP:(0): processing vendor id payload
*May  4 00:44:20.937: ISAKMP:(0): vendor ID seems Unity/DPD but major 157 mismatch
*May  4 00:44:20.937: ISAKMP:(0): vendor ID is NAT-T v3
*May  4 00:44:20.937: ISAKMP:(0): processing vendor id payload
*May  4 00:44:20.937: ISAKMP:(0): vendor ID seems Unity/DPD but major 123 mismatch
*May  4 00:44:20.937: ISAKMP:(0): vendor ID is NAT-T v2
*May  4 00:44:20.937: ISAKMP:(0): Authentication by xauth preshared
*May  4 00:44:20.937: ISAKMP:(0):Checking ISAKMP transform 1 against priority 3 policy
*May  4 00:44:20.937: ISAKMP:      encryption AES-CBC
*May  4 00:44:20.937: ISAKMP:      keylength of 128
*May  4 00:44:20.937: ISAKMP:      hash SHA
*May  4 00:44:20.937: ISAKMP:      default group 2
*May  4 00:44:20.937: ISAKMP:      auth XAUTHInitPreShared
*May  4 00:44:20.937: ISAKMP:      life type in seconds
*May  4 00:44:20.937: ISAKMP:      life duration (VPI) of  0x0 0x20 0xC4 0x9B
*May  4 00:44:20.937: ISAKMP:(0):Encryption algorithm offered does not match policy!
*May  4 00:44:20.937: ISAKMP:(0):atts are not acceptable. Next payload is 3
*May  4 00:44:20.937: ISAKMP:(0):Checking ISAKMP transform 2 against priority 3 policy
*May  4 00:44:20.937: ISAKMP:      encryption AES-CBC
*May  4 00:44:20.937: ISAKMP:      keylength of 128
*May  4 00:44:20.937: ISAKMP:      hash MD5
*May  4 00:44:20.937: ISAKMP:      default group 2
*May  4 00:44:20.937: ISAKMP:      auth XAUTHInitPreShared
*May  4 00:44:20.937: ISAKMP:      life type in seconds
*May  4 00:44:20.937: ISAKMP:      life duration (VPI) of  0x0 0x20 0xC4 0x9B
*May  4 00:44:20.937: ISAKMP:(0):Encryption algorithm offered does not match policy!
*May  4 00:44:20.937: ISAKMP:(0):atts are not acceptable. Next payload is 3
*May  4 00:44:20.937: ISAKMP:(0):Checking ISAKMP transform 3 against priority 3 policy
*May  4 00:44:20.937: ISAKMP:      encryption AES-CBC
*May  4 00:44:20.937: ISAKMP:      keylength of 192
*May  4 00:44:20.937: ISAKMP:      hash SHA
*May  4 00:44:20.937: ISAKMP:      default group 2
*May  4 00:44:20.937: ISAKMP:      auth XAUTHInitPreShared
*May  4 00:44:20.937: ISAKMP:      life type in seconds
*May  4 00:44:20.937: ISAKMP:      life duration (VPI) of  0x0 0x20 0xC4 0x9B
*May  4 00:44:20.937: ISAKMP:(0):Encryption algorithm offered does not match policy!
*May  4 00:44:20.937: ISAKMP:(0):atts are not acceptable. Next payload is 3
*May  4 00:44:20.937: ISAKMP:(0):Checking ISAKMP transform 4 against priority 3 policy
*May  4 00:44:20.937: ISAKMP:      encryption AES-CBC
*May  4 00:44:20.937: ISAKMP:      keylength of 192
*May  4 00:44:20.937: ISAKMP:      hash MD5
*May  4 00:44:20.937: ISAKMP:      default group 2
*May  4 00:44:20.937: ISAKMP:      auth XAUTHInitPreShared
*May  4 00:44:20.937: ISAKMP:      life type in seconds
*May  4 00:44:20.937: ISAKMP:      life duration (VPI) of  0x0 0x20 0xC4 0x9B
*May  4 00:44:20.937: ISAKMP:(0):Encryption algorithm offered does not match policy!
*May  4 00:44:20.937: ISAKMP:(0):atts are not acceptable. Next payload is 3
*May  4 00:44:20.937: ISAKMP:(0):Checking ISAKMP transform 5 against priority 3 policy
*May  4 00:44:20.937: ISAKMP:      encryption AES-CBC
*May  4 00:44:20.937: ISAKMP:      keylength of 256
*May  4 00:44:20.937: ISAKMP:      hash SHA
*May  4 00:44:20.937: ISAKMP:      default group 2
*May  4 00:44:20.937: ISAKMP:      auth XAUTHInitPreShared
*May  4 00:44:20.937: ISAKMP:      life type in seconds
*May  4 00:44:20.937: ISAKMP:      life duration (VPI) of  0x0 0x20 0xC4 0x9B
*May  4 00:44:20.937: ISAKMP:(0):Encryption algorithm offered does not match policy!
*May  4 00:44:20.937: ISAKMP:(0):atts are not acceptable. Next payload is 3
*May  4 00:44:20.937: ISAKMP:(0):Checking ISAKMP transform 6 against priority 3 policy
*May  4 00:44:20.937: ISAKMP:      encryption AES-CBC
*May  4 00:44:20.937: ISAKMP:      keylength of 256
*May  4 00:44:20.941: ISAKMP:      hash MD5
*May  4 00:44:20.941: ISAKMP:      default group 2
*May  4 00:44:20.941: ISAKMP:      auth XAUTHInitPreShared
*May  4 00:44:20.941: ISAKMP:      life type in seconds
*May  4 00:44:20.941: ISAKMP:      life duration (VPI) of  0x0 0x20 0xC4 0x9B
*May  4 00:44:20.941: ISAKMP:(0):Encryption algorithm offered does not match policy!
*May  4 00:44:20.941: ISAKMP:(0):atts are not acceptable. Next payload is 3
*May  4 00:44:20.941: ISAKMP:(0):Checking ISAKMP transform 7 against priority 3 policy
*May  4 00:44:20.941: ISAKMP:      encryption AES-CBC
*May  4 00:44:20.941: ISAKMP:      keylength of 128
*May  4 00:44:20.941: ISAKMP:      hash SHA
*May  4 00:44:20.941: ISAKMP:      default group 2
*May  4 00:44:20.941: ISAKMP:      auth pre-share
*May  4 00:44:20.941: ISAKMP:      life type in seconds
*May  4 00:44:20.941: ISAKMP:      life duration (VPI) of  0x0 0x20 0xC4 0x9B
*May  4 00:44:20.941: ISAKMP:(0):Encryption algorithm offered does not match policy!
*May  4 00:44:20.941: ISAKMP:(0):atts are not acceptable. Next payload is 3
*May  4 00:44:20.941: ISAKMP:(0):Checking ISAKMP transform 8 against priority 3 policy
*May  4 00:44:20.941: ISAKMP:      encryption AES-CBC
*May  4 00:44:20.941: ISAKMP:      keylength of 128
*May  4 00:44:20.941: ISAKMP:      hash MD5
*May  4 00:44:20.941: ISAKMP:      default group 2
*May  4 00:44:20.941: ISAKMP:      auth pre-share
*May  4 00:44:20.941: ISAKMP:      life type in seconds
*May  4 00:44:20.941: ISAKMP:      life duration (VPI) of  0x0 0x20 0xC4 0x9B
*May  4 00:44:20.941: ISAKMP:(0):Encryption algorithm offered does not match policy!
*May  4 00:44:20.941: ISAKMP:(0):atts are not acceptable. Next payload is 3
*May  4 00:44:20.941: ISAKMP:(0):Checking ISAKMP transform 9 against priority 3 policy
*May  4 00:44:20.941: ISAKMP:      encryption AES-CBC
*May  4 00:44:20.941: ISAKMP:      keylength of 192
*May  4 00:44:20.941: ISAKMP:      hash SHA
*May  4 00:44:20.941: ISAKMP:      default group 2
*May  4 00:44:20.941: ISAKMP:      auth pre-share
*May  4 00:44:20.941: ISAKMP:      life type in seconds
*May  4 00:44:20.941: ISAKMP:      life duration (VPI) of  0x0 0x20 0xC4 0x9B
*May  4 00:44:20.941: ISAKMP:(0):Encryption algorithm offered does not match policy!
*May  4 00:44:20.941: ISAKMP:(0):atts are not acceptable. Next payload is 3
*May  4 00:44:20.941: ISAKMP:(0):Checking ISAKMP transform 10 against priority 3 policy
*May  4 00:44:20.941: ISAKMP:      encryption AES-CBC
*May  4 00:44:20.941: ISAKMP:      keylength of 192
*May  4 00:44:20.941: ISAKMP:      hash MD5
*May  4 00:44:20.941: ISAKMP:      default group 2
*May  4 00:44:20.941: ISAKMP:      auth pre-share
*May  4 00:44:20.941: ISAKMP:      life type in seconds
*May  4 00:44:20.941: ISAKMP:      life duration (VPI) of  0x0 0x20 0xC4 0x9B
*May  4 00:44:20.941: ISAKMP:(0):Encryption algorithm offered does not match policy!
*May  4 00:44:20.941: ISAKMP:(0):atts are not acceptable. Next payload is 3
*May  4 00:44:20.941: ISAKMP:(0):Checking ISAKMP transform 11 against priority 3 policy
*May  4 00:44:20.941: ISAKMP:      encryption AES-CBC
*May  4 00:44:20.941: ISAKMP:      keylength of 256
*May  4 00:44:20.941: ISAKMP:      hash SHA
*May  4 00:44:20.941: ISAKMP:      default group 2
*May  4 00:44:20.941: ISAKMP:      auth pre-share
*May  4 00:44:20.941: ISAKMP:      life type in seconds
*May  4 00:44:20.941: ISAKMP:      life duration (VPI) of  0x0 0x20 0xC4 0x9B
*May  4 00:44:20.941: ISAKMP:(0):Encryption algorithm offered does not match policy!
*May  4 00:44:20.941: ISAKMP:(0):atts are not acceptable. Next payload is 3
*May  4 00:44:20.941: ISAKMP:(0):Checking ISAKMP transform 12 against priority 3 policy
*May  4 00:44:20.941: ISAKMP:      encryption AES-CBC
*May  4 00:44:20.941: ISAKMP:      keylength of 256
*May  4 00:44:20.941: ISAKMP:      hash MD5
*May  4 00:44:20.941: ISAKMP:      default group 2
*May  4 00:44:20.941: ISAKMP:      auth pre-share
*May  4 00:44:20.941: ISAKMP:      life type in seconds
*May  4 00:44:20.941: ISAKMP:      life duration (VPI) of  0x0 0x20 0xC4 0x9B
*May  4 00:44:20.941: ISAKMP:(0):Encryption algorithm offered does not match policy!
*May  4 00:44:20.941: ISAKMP:(0):atts are not acceptable. Next payload is 3
*May  4 00:44:20.941: ISAKMP:(0):Checking ISAKMP transform 13 against priority 3 policy
*May  4 00:44:20.941: ISAKMP:      encryption 3DES-CBC
*May  4 00:44:20.941: ISAKMP:      hash SHA
*May  4 00:44:20.941: ISAKMP:      default group 2
*May  4 00:44:20.941: ISAKMP:      auth XAUTHInitPreShared
*May  4 00:44:20.941: ISAKMP:      life type in seconds
*May  4 00:44:20.941: ISAKMP:      life duration (VPI) of  0x0 0x20 0xC4 0x9B
*May  4 00:44:20.941: ISAKMP:(0):atts are acceptable. Next payload is 3
*May  4 00:44:20.941: ISAKMP:(0): processing vendor id payload
*May  4 00:44:20.941: ISAKMP:(0): vendor ID seems Unity/DPD but major 245 mismatch
*May  4 00:44:20.941: ISAKMP (0:0): vendor ID is NAT-T v7
*May  4 00:44:20.941: ISAKMP:(0): processing vendor id payload
*May  4 00:44:20.941: ISAKMP:(0): vendor ID seems Unity/DPD but major 157 mismatch
*May  4 00:44:20.941: ISAKMP:(0): vendor ID is NAT-T v3
*May  4 00:44:20.941: ISAKMP:(0): processing vendor id payload
*May  4 00:44:20.941: ISAKMP:(0): vendor ID seems Unity/DPD but major 123 mismatch
*May  4 00:44:20.941: ISAKMP:(0): vendor ID is NAT-T v2
*May  4 00:44:20.941: ISAKMP:(0): processing KE payload. message ID = 0
*May  4 00:44:20.957: ISAKMP:(0): processing NONCE payload. message ID = 0
*May  4 00:44:20.957: ISAKMP:(0): processing vendor id payload
*May  4 00:44:20.957: ISAKMP:(0): vendor ID is DPD
*May  4 00:44:20.957: ISAKMP:(0): processing vendor id payload
*May  4 00:44:20.957: ISAKMP:(0): vendor ID seems Unity/DPD but major 79 mismatch
*May  4 00:44:20.957: ISAKMP:(0): vendor ID is XAUTH
*May  4 00:44:20.957: ISAKMP:(0): processing vendor id payload
*May  4 00:44:20.957: ISAKMP:(0): claimed IOS but failed authentication
*May  4 00:44:20.957: ISAKMP:(0): processing vendor id payload
*May  4 00:44:20.957: ISAKMP:(0): vendor ID is Unity
*May  4 00:44:20.957: ISAKMP:(0):Input = IKE_MESG_FROM_PEER, IKE_AM_EXCH
*May  4 00:44:20.957: ISAKMP:(0):Old State = IKE_READY  New State = IKE_R_AM_AAA_AWAIT

*May  4 00:44:20.957: ISAKMP:(1008): constructed NAT-T vendor-07 ID
*May  4 00:44:20.957: ISAKMP:(1008):SA is doing pre-shared key authentication 
                      plus XAUTH using id type ID_IPV4_ADDR
*May  4 00:44:20.957: ISAKMP (0:1008): ID payload
        next-payload : 10
        type         : 1
        address      : 172.16.186.186
        protocol     : 17
        port         : 0
        length       : 12
*May  4 00:44:20.957: ISAKMP:(1008):Total payload length: 12
*May  4 00:44:20.957: ISAKMP:(1008): sending packet to 172.16.186.130 my_port 
                      500 peer_port 500 (R) AG_INIT_EXCH
*May  4 00:44:20.957: ISAKMP:(1008):Input = IKE_MESG_FROM_AAA, PRESHARED_KEY_REPLY
*May  4 00:44:20.957: ISAKMP:(1008):Old State = IKE_R_AM_AAA_AWAIT  New State = IKE_R_AM2

*May  4 00:44:20.985: ISAKMP (0:1008): received packet from 172.16.186.130 dport 
                      500 sport 500 Global (R) AG_INIT_EXCH
*May  4 00:44:20.985: ISAKMP:(1008): processing HASH payload. message ID = 0
*May  4 00:44:20.985: ISAKMP:(1008): processing NOTIFY INITIAL_CONTACT protocol 1
        spi 0, message ID = 0, sa = 67369734
*May  4 00:44:20.985: ISAKMP:(1008):SA authentication status:
        authenticated
*May  4 00:44:20.985: ISAKMP:(1008):SA has been authenticated with 172.16.186.130
*May  4 00:44:20.985: ISAKMP:(1008):SA authentication status:
        authenticated
*May  4 00:44:20.985: ISAKMP:(1008): Process initial contact,
bring down existing phase 1 and 2 SA's with local 172.16.186.186 remote 172.16.186.130 
          remote port 500
*May  4 00:44:20.985: ISAKMP:(1008):returning IP addr to the address pool
*May  4 00:44:20.985: ISAKMP: Trying to insert a peer 172.16.186.186/172.16.186.130/500/, 
                      and inserted successfully 6745B8E0.
*May  4 00:44:20.985: ISAKMP: set new node 1361385973 to CONF_XAUTH
*May  4 00:44:20.985: ISAKMP:(1008):Sending NOTIFY RESPONDER_LIFETIME protocol 1
        spi 1722618680, message ID = 1361385973
*May  4 00:44:20.985: ISAKMP:(1008): sending packet to 172.16.186.130 my_port 500 
                      peer_port 500 (R) QM_IDLE
*May  4 00:44:20.985: ISAKMP:(1008):purging node 1361385973
*May  4 00:44:20.985: ISAKMP: Sending phase 1 responder lifetime 86400

*May  4 00:44:20.985: ISAKMP:(1008):Input = IKE_MESG_FROM_PEER, IKE_AM_EXCH
*May  4 00:44:20.985: ISAKMP:(1008):Old State = IKE_R_AM2  New State = IKE_P1_COMPLETE

!--- Requesting Xauth.


*May  4 00:44:20.985: IPSEC(key_engine): got a queue event with 1 KMI message(s)
*May  4 00:44:20.985: ISAKMP:(1008):Need XAUTH
*May  4 00:44:20.985: ISAKMP: set new node -605466681 to CONF_XAUTH
*May  4 00:44:20.985: ISAKMP/xauth: request attribute XAUTH_USER_NAME_V2
*May  4 00:44:20.985: ISAKMP/xauth: request attribute XAUTH_USER_PASSWORD_V2
*May  4 00:44:20.985: ISAKMP:(1008): initiating peer config to 172.16.186.130. 
                       ID = -605466681
*May  4 00:44:20.985: ISAKMP:(1008): sending packet to 172.16.186.130 my_port 
                      500 peer_port 500 (R) CONF_XAUTH
*May  4 00:44:20.985: ISAKMP:(1008):Input = IKE_MESG_INTERNAL, IKE_PHASE1_COMPLETE
*May  4 00:44:20.985: ISAKMP:(1008):Old State = IKE_P1_COMPLETE  New State = 
                      IKE_XAUTH_REQ_SENT


*May  4 00:44:35.985: ISAKMP:(1008): retransmitting phase 2 CONF_XAUTH    -605466681 ...
*May  4 00:44:35.985: ISAKMP (0:1008): incrementing error counter on node, 
                       attempt 1 of 5: retransmit phase 2
*May  4 00:44:35.985: ISAKMP (0:1008): incrementing error counter on sa, 
                       attempt 1 of 5: retransmit phase 2
*May  4 00:44:35.985: ISAKMP:(1008): retransmitting phase 2 -605466681 CONF_XAUTH
*May  4 00:44:35.985: ISAKMP:(1008): sending packet to 172.16.186.130 
                       my_port 500 peer_port 500 (R) CONF_XAUTH   R#
3-07-07-7200VXR#
*May  4 00:44:50.985: ISAKMP:(1008): retransmitting phase 2 CONF_XAUTH    -605466681 ...
*May  4 00:44:50.985: ISAKMP (0:1008): incrementing error counter on node, 
                      attempt 2 of 5: retransmit phase 2
*May  4 00:44:50.985: ISAKMP (0:1008): incrementing error counter on sa, 
                      attempt 2 of 5: retransmit phase 2
*May  4 00:44:50.985: ISAKMP:(1008): retransmitting phase 2 -605466681 CONF_XAUTH
*May  4 00:44:50.985: ISAKMP:(1008): sending packet to 172.16.186.130 
                      my_port 500 peer_port 500 (R) CONF_XAUTH
3-07-07-7200VXR#
*May  4 00:45:01.997: ISAKMP (0:1008): received packet from 172.16.186.130 
                      dport 500 sport 500 Global (R) CONF_XAUTH
*May  4 00:45:01.997: ISAKMP:(1008):processing transaction payload from 
                      172.16.186.130. message ID = -605466681
*May  4 00:45:01.997: ISAKMP: Config payload REPLY
*May  4 00:45:01.997: ISAKMP/xauth: reply attribute XAUTH_USER_NAME_V2
*May  4 00:45:01.997: ISAKMP/xauth: reply attribute XAUTH_USER_PASSWORD_V2
*May  4 00:45:01.997: ISAKMP:(1008):deleting node -605466681 error FALSE 
                       reason "Done with xauth request/reply exchange"
*May  4 00:45:01.997: ISAKMP:(1008):Input = IKE_MESG_FROM_PEER, IKE_CFG_REPLY
*May  4 00:45:01.997: ISAKMP:(1008):Old State = IKE_XAUTH_REQ_SENT  
                      New State = IKE_XAUTH_AAA_CONT_LOGIN_AWAIT

*May  4 00:45:01.997: ISAKMP: set new node 1283697340 to CONF_XAUTH
*May  4 00:45:01.997: ISAKMP:(1008): initiating peer config to 172.16.186.130. 
                       ID = 1283697340
*May  4 00:45:01.997: ISAKMP:(1008): sending packet to 172.16.186.130 my_port 5
3-07-07-7200VX00 peer_port 500 (R) CONF_XAUTH
*May  4 00:45:01.997: ISAKMP:(1008):Input = IKE_MESG_FROM_AAA, IKE_AAA_CONT_LOGIN
*May  4 00:45:01.997: ISAKMP:(1008):Old State = IKE_XAUTH_AAA_CONT_LOGIN_AWAIT  
                      New State = IKE_XAUTH_SET_SENT

*May  4 00:45:02.005: ISAKMP (0:1008): received packet from 172.16.186.130 
                       dport 500 sport 500 Global (R) CONF_XAUTH
*May  4 00:45:02.005: ISAKMP:(1008):processing transaction payload from 172.16.186.130. 
                       message ID = 1283697340
*May  4 00:45:02.005: ISAKMP: Config payload ACK
*May  4 00:45:02.005: ISAKMP:(1008):       XAUTH ACK Processed
*May  4 00:45:02.005: ISAKMP:(1008):deleting node 1283697340 error FALSE reason 
                      "Transaction mode done"
*May  4 00:45:02.005: ISAKMP:(1008):Input = IKE_MESG_FROM_PEER, IKE_CFG_ACK
*May  4 00:45:02.005: ISAKMP:(1008):Old State = IKE_XAUTH_SET_SENT  New State = 
                      IKE_P1_COMPLETE

*May  4 00:45:02.005: ISAKMP:(1008):Input = IKE_MESG_INTERNAL, IKE_PHASE1_COMPLETE
*May  4 00:45:02.005: ISAKMP:(1008):Old State = IKE_P1_COMPLETE  New State = 
                       IKE_P1_COMPLETE

*May  4 00:45:02.005: ISAKMP (0:1008): received packet from 172.16.186.130 
                      dport 500 sport 500 Global (R) QM_IDLE
*May  4 00:45:02.005: ISAKMP: set new node 104696831 to QM_IDLE
*May  4 00:45:02.005: ISAKMP:(1008):processing transaction payload from 
                      172.16.186.130. message ID = 104696831
*May  4 00:45:02.005: ISAKMP: Config payload REQUEST
*May  4 00:45:02.005: ISAKMP:(1008):checking request:
*May  4 00:45:02.005: ISAKMP:    MODECFG_CONFIG_URL
*May  4 00:45:02.005: ISAKMP:    MODECFG_CONFIG_VERSION
*May  4 00:45:02.009: ISAKMP:    IP4_DNS
*May  4 00:45:02.009: ISAKMP:    IP4_DNS
*May  4 00:45:02.009: ISAKMP:    IP4_NBNS
*May  4 00:45:02.009: ISAKMP:    IP4_NBNS
*May  4 00:45:02.009: ISAKMP:    SPLIT_INCLUDE
*May  4 00:45:02.009: ISAKMP:    SPLIT_DNS
*May  4 00:45:02.009: ISAKMP:    DEFAULT_DOMAIN
*May  4 00:45:02.009: ISAKMP:    MODECFG_SAVEPWD
*May  4 00:45:02.009: ISAKMP:    INCLUDE_LOCAL_LAN
*May  4 00:45:02.009: ISAKMP:    PFS
*May  4 00:45:02.009: ISAKMP:    BACKUP_SERVER
*May  4 00:45:02.009: ISAKMP:    APPLICATION_VERSION
*May  4 00:45:02.009: ISAKMP:    MODECFG-BANNER
*May  4 00:45:02.009: ISAKMP:    MODECFG_IPSEC_INT_CONF
*May  4 00:45:02.009: ISAKMP/author: Author request for group vpngrpsuccessfully 
                      sent to AAA
*May  4 00:45:02.009: ISAKMP:(1008):Input = IKE_MESG_FROM_PEER, IKE_CFG_REQUEST
*May  4 00:45:02.009: ISAKMP:(1008):Old State = IKE_P1_COMPLETE  New State = 
                       IKE_CONFIG_AUTHOR_AAA_AWAIT

*May  4 00:45:02.009: ISAKMP:(1008):Receive config attributes requested 
                       butconfig attributes not in crypto map.  Sending empty reply.
*May  4 00:45:02.009: ISAKMP:(1008):attributes sent in message:
*May  4 00:45:02.009: ISAKMP: Sending APPLICATION_VERSION string: Cisco 
                      IOS Software, 7200 Software (C7200-ADVENTERPRISEK9-M),
                      Version 12.4(4)T1, RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Wed 21-Dec-05 22:58 by ccai
*May  4 00:45:02.009: ISAKMP: Sending IPsec Interface Config reply value 0
*May  4 00:45:02.009: ISAKMP:(1008): responding to peer config from 172.16.186.130. 
                      ID = 104696831
*May  4 00:45:02.009: ISAKMP:(1008): sending packet to 172.16.186.130 my_port 
                       500 peer_port 500 (R) CONF_ADDR
*May  4 00:45:02.009: ISAKMP:(1008):deleting node 104696831 error FALSE reason 
                      "No Error"
*May  4 00:45:02.009: ISAKMP:(1008):Input = IKE_MESG_FROM_AAA, IKE_AAA_GROUP_ATTR
*May  4 00:45:02.009: ISAKMP:(1008):Old State = IKE_CONFIG_AUTHOR_AAA_AWAIT  
                      New State = IKE_P1_COMPLETE

*May  4 00:45:02.009: ISAKMP:(1008):Input = IKE_MESG_INTERNAL, IKE_PHASE1_COMPLETE
*May  4 00:45:02.009: ISAKMP:(1008):Old State = IKE_P1_COMPLETE  New State = 
                      IKE_P1_COMPLETE

*May  4 00:45:02.029: ISAKMP (0:1008): received packet from 172.16.186.130 
                      dport 500 sport 500 Global (R) QM_IDLE
*May  4 00:45:02.029: ISAKMP: set new node -1665883002 to QM_IDLE
*May  4 00:45:02.029: ISAKMP:(1008): processing HASH payload. message ID = -1665883002
*May  4 00:45:02.029: ISAKMP:(1008): processing SA payload. message ID = -1665883002
*May  4 00:45:02.029: ISAKMP:(1008):Checking IPSec proposal 1
*May  4 00:45:02.029: ISAKMP: transform 1, ESP_AES
*May  4 00:45:02.029: ISAKMP:   attributes in transform:
*May  4 00:45:02.029: ISAKMP:      encaps is 1 (Tunnel)
*May  4 00:45:02.029: ISAKMP:      SA life type in seconds
*May  4 00:45:02.029: ISAKMP:      SA life duration (VPI) of  0x0 0x20 0xC4 0x9B
*May  4 00:45:02.029: ISAKMP:      SA life type in kilobytes
*May  4 00:45:02.029: ISAKMP:      SA life duration (VPI) of  0x0 0x46 0x50 0x0
*May  4 00:45:02.029: ISAKMP:      authenticator is HMAC-SHA
*May  4 00:45:02.029: ISAKMP:      key length is 128
*May  4 00:45:02.029: ISAKMP:(1008):atts are acceptable.
*May  4 00:45:02.029: IPSEC(validate_proposal_request): proposal part #1
*May  4 00:45:02.029: IPSEC(validate_proposal_request): proposal part #1,
  (key eng. msg.) INBOUND local= 172.16.186.186, remote= 172.16.186.130,
    local_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4),
    remote_proxy= 10.12.130.1/255.255.255.255/0/0 (type=1),
    protocol= ESP, transform= esp-aes esp-sha-hmac  (Tunnel),
    lifedur= 0s and 0kb,
    spi= 0x0(0), conn_id= 0, keysize= 128, flags= 0x0
*May  4 00:45:02.029: IPSEC(crypto_ipsec_process_proposal): transform proposal 
                      not supported for identity:
    {esp-aes esp-sha-hmac }
*May  4 00:45:02.029: ISAKMP:(1008): IPSec policy invalidated proposal
*May  4 00:45:02.029: ISAKMP:(1008):Checking IPSec proposal 2
*May  4 00:45:02.029: ISAKMP: transform 1, ESP_AES
*May  4 00:45:02.029: ISAKMP:   attributes in transform:
*May  4 00:45:02.029: ISAKMP:      encaps is 1 (Tunnel)
*May  4 00:45:02.029: ISAKMP:      SA life type in seconds
*May  4 00:45:02.029: ISAKMP:      SA life duration (VPI) of  0x0 0x20 0xC4 0x9B
*May  4 00:45:02.029: ISAKMP:      SA life type in kilobytes
*May  4 00:45:02.029: ISAKMP:      SA life duration (VPI) of  0x0 0x46 0x50 0x0
*May  4 00:45:02.029: ISAKMP:      authenticator is HMAC-MD5
*May  4 00:45:02.029: ISAKMP:      key length is 128
*May  4 00:45:02.029: ISAKMP:(1008):atts are acceptable.
*May  4 00:45:02.029: IPSEC(validate_proposal_request): proposal part #1
*May  4 00:45:02.029: IPSEC(validate_proposal_request): proposal part #1,
  (key eng. msg.) INBOUND local= 172.16.186.186, remote= 172.16.186.130,
    local_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4),
    remote_proxy= 10.12.130.1/255.255.255.255/0/0 (type=1),
    protocol= ESP, transform= esp-aes esp-md5-hmac  (Tunnel),
    lifedur= 0s and 0kb,
    spi= 0x0(0), conn_id= 0, keysize= 128, flags= 0x0
*May  4 00:45:02.029: IPSEC(crypto_ipsec_process_proposal): transform 
                      proposal not supported for identity:
    {esp-aes esp-md5-hmac }
*May  4 00:45:02.029: ISAKMP:(1008): IPSec policy invalidated proposal
*May  4 00:45:02.029: ISAKMP:(1008):Checking IPSec proposal 3
*May  4 00:45:02.029: ISAKMP: transform 1, ESP_AES
*May  4 00:45:02.029: ISAKMP:   attributes in transform:
*May  4 00:45:02.029: ISAKMP:      encaps is 1 (Tunnel)
*May  4 00:45:02.029: ISAKMP:      SA life type in seconds
*May  4 00:45:02.029: ISAKMP:      SA life duration (VPI) of  0x0 0x20 0xC4 0x9B
*May  4 00:45:02.029: ISAKMP:      SA life type in kilobytes
*May  4 00:45:02.029: ISAKMP:      SA life duration (VPI) of  0x0 0x46 0x50 0x0
*May  4 00:45:02.029: ISAKMP:      authenticator is HMAC-SHA
*May  4 00:45:02.029: ISAKMP:      key length is 192
*May  4 00:45:02.029: ISAKMP:(1008):atts are acceptable.
*May  4 00:45:02.029: IPSEC(validate_proposal_request): proposal part #1
*May  4 00:45:02.029: IPSEC(validate_proposal_request): proposal part #1,
  (key eng. msg.) INBOUND local= 172.16.186.186, remote= 172.16.186.130,
    local_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4),
    remote_proxy= 10.12.130.1/255.255.255.255/0/0 (type=1),
    protocol= ESP, transform= esp-aes 192 esp-sha-hmac  (Tunnel),
    lifedur= 0s and 0kb,
    spi= 0x0(0), conn_id= 0, keysize= 192, flags= 0x0
*May  4 00:45:02.029: IPSEC(crypto_ipsec_process_proposal): transform proposal 
                   not supported for identity:
    {esp-aes 192 esp-sha-hmac }
*May  4 00:45:02.029: ISAKMP:(1008): IPSec policy invalidated proposal
*May  4 00:45:02.029: ISAKMP:(1008):Checking IPSec proposal 4
*May  4 00:45:02.029: ISAKMP: transform 1, ESP_AES
*May  4 00:45:02.029: ISAKMP:   attributes in transform:
*May  4 00:45:02.029: ISAKMP:      encaps is 1 (Tunnel)
*May  4 00:45:02.029: ISAKMP:      SA life type in seconds
*May  4 00:45:02.029: ISAKMP:      SA life duration (VPI) of  0x0 0x20 0xC4 0x9B
*May  4 00:45:02.029: ISAKMP:      SA life type in kilobytes
*May  4 00:45:02.029: ISAKMP:      SA life duration (VPI) of  0x0 0x46 0x50 0x0
*May  4 00:45:02.029: ISAKMP:      authenticator is HMAC-MD5
*May  4 00:45:02.029: ISAKMP:      key length is 192
*May  4 00:45:02.029: ISAKMP:(1008):atts are acceptable.
*May  4 00:45:02.029: IPSEC(validate_proposal_request): proposal part #1
*May  4 00:45:02.029: IPSEC(validate_proposal_request): proposal part #1,
  (key eng. msg.) INBOUND local= 172.16.186.186, remote= 172.16.186.130,
    local_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4),
    remote_proxy= 10.12.130.1/255.255.255.255/0/0 (type=1),
    protocol= ESP, transform= esp-aes 192 esp-md5-hmac  (Tunnel),
    lifedur= 0s and 0kb,
    spi= 0x0(0), conn_id= 0, keysize= 192, flags= 0x0
*May  4 00:45:02.029: IPSEC(crypto_ipsec_process_proposal): transform proposal 
                      not supported for identity:
    {esp-aes 192 esp-md5-hmac }
*May  4 00:45:02.029: ISAKMP:(1008): IPSec policy invalidated proposal
*May  4 00:45:02.029: ISAKMP:(1008):Checking IPSec proposal 5
*May  4 00:45:02.029: ISAKMP: transform 1, ESP_AES
*May  4 00:45:02.029: ISAKMP:   attributes in transform:
*May  4 00:45:02.029: ISAKMP:      encaps is 1 (Tunnel)
*May  4 00:45:02.029: ISAKMP:      SA life type in seconds
*May  4 00:45:02.029: ISAKMP:      SA life duration (VPI) of  0x0 0x20 0xC4 0x9B
*May  4 00:45:02.029: ISAKMP:      SA life type in kilobytes
*May  4 00:45:02.029: ISAKMP:      SA life duration (VPI) of  0x0 0x46 0x50 0x0
*May  4 00:45:02.029: ISAKMP:      authenticator is HMAC-SHA
*May  4 00:45:02.033: ISAKMP:      key length is 256
*May  4 00:45:02.033: ISAKMP:(1008):atts are acceptable.
*May  4 00:45:02.033: IPSEC(validate_proposal_request): proposal part #1
*May  4 00:45:02.033: IPSEC(validate_proposal_request): proposal part #1,
  (key eng. msg.) INBOUND local= 172.16.186.186, remote= 172.16.186.130,
    local_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4),
    remote_proxy= 10.12.130.1/255.255.255.255/0/0 (type=1),
    protocol= ESP, transform= esp-aes 256 esp-sha-hmac  (Tunnel),
    lifedur= 0s and 0kb,
    spi= 0x0(0), conn_id= 0, keysize= 256, flags= 0x0
*May  4 00:45:02.033: IPSEC(crypto_ipsec_process_proposal): transform proposal 
                       not supported for identity:
    {esp-aes 256 esp-sha-hmac }
*May  4 00:45:02.033: ISAKMP:(1008): IPSec policy invalidated proposal
*May  4 00:45:02.033: ISAKMP:(1008):Checking IPSec proposal 6
*May  4 00:45:02.033: ISAKMP: transform 1, ESP_AES
*May  4 00:45:02.033: ISAKMP:   attributes in transform:
*May  4 00:45:02.033: ISAKMP:      encaps is 1 (Tunnel)
*May  4 00:45:02.033: ISAKMP:      SA life type in seconds
*May  4 00:45:02.033: ISAKMP:      SA life duration (VPI) of  0x0 0x20 0xC4 0x9B
*May  4 00:45:02.033: ISAKMP:      SA life type in kilobytes
*May  4 00:45:02.033: ISAKMP:      SA life duration (VPI) of  0x0 0x46 0x50 0x0
*May  4 00:45:02.033: ISAKMP:      authenticator is HMAC-MD5
*May  4 00:45:02.033: ISAKMP:      key length is 256
*May  4 00:45:02.033: ISAKMP:(1008):atts are acceptable.
*May  4 00:45:02.033: IPSEC(validate_proposal_request): proposal part #1
*May  4 00:45:02.033: IPSEC(validate_proposal_request): proposal part #1,
  (key eng. msg.) INBOUND local= 172.16.186.186, remote= 172.16.186.130,
    local_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4),
    remote_proxy= 10.12.130.1/255.255.255.255/0/0 (type=1),
    protocol= ESP, transform= esp-aes 256 esp-md5-hmac  (Tunnel),
    lifedur= 0s and 0kb,
    spi= 0x0(0), conn_id= 0, keysize= 256, flags= 0x0
*May  4 00:45:02.033: IPSEC(crypto_ipsec_process_proposal): transform 
                      proposal not supported for identity:
    {esp-aes 256 esp-md5-hmac }
*May  4 00:45:02.033: ISAKMP:(1008): IPSec policy invalidated proposal
*May  4 00:45:02.033: ISAKMP:(1008):Checking IPSec proposal 7
*May  4 00:45:02.033: ISAKMP: transform 1, ESP_3DES
*May  4 00:45:02.033: ISAKMP:   attributes in transform:
*May  4 00:45:02.033: ISAKMP:      encaps is 1 (Tunnel)
*May  4 00:45:02.033: ISAKMP:      SA life type in seconds
*May  4 00:45:02.033: ISAKMP:      SA life duration (VPI) of  0x0 0x20 0xC4 0x9B
*May  4 00:45:02.033: ISAKMP:      SA life type in kilobytes
*May  4 00:45:02.033: ISAKMP:      SA life duration (VPI) of  0x0 0x46 0x50 0x0
*May  4 00:45:02.033: ISAKMP:      authenticator is HMAC-SHA
*May  4 00:45:02.033: ISAKMP:(1008):atts are acceptable.
*May  4 00:45:02.033: IPSEC(validate_proposal_request): proposal part #1
*May  4 00:45:02.033: IPSEC(validate_proposal_request): proposal part #1,
  (key eng. msg.) INBOUND local= 172.16.186.186, remote= 172.16.186.130,
    local_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4),
    remote_proxy= 10.12.130.1/255.255.255.255/0/0 (type=1),
    protocol= ESP, transform= esp-3des esp-sha-hmac  (Tunnel),
    lifedur= 0s and 0kb,
    spi= 0x0(0), conn_id= 0, keysize= 0, flags= 0x0
*May  4 00:45:02.033: ISAKMP:(1008): processing NONCE payload. message ID = -1665883002
*May  4 00:45:02.033: ISAKMP:(1008): processing ID payload. message ID = -1665883002
*May  4 00:45:02.033: ISAKMP:(1008): processing ID payload. message ID = -1665883002
*May  4 00:45:02.033: ISAKMP:(1008): asking for 1 spis from ipsec
*May  4 00:45:02.033: ISAKMP:(1008):Node -1665883002, Input = IKE_MESG_FROM_PEER, IKE_QM_EXCH
*May  4 00:45:02.033: ISAKMP:(1008):Old State = IKE_QM_READY  New State = IKE_QM_SPI_STARVE
*May  4 00:45:02.033: IPSEC(key_engine): got a queue event with 1 KMI message(s)
*May  4 00:45:02.033: IPSEC(spi_response): getting spi 1752561220 for SA
        from 172.16.186.186 to 172.16.186.130 for prot 3
*May  4 00:45:02.033: ISAKMP:(1008): Creating IPSec SAs
*May  4 00:45:02.033:         inbound SA from 172.16.186.130 to 172.16.186.186 (f/i)  0/ 0
        (proxy 10.12.130.1 to 0.0.0.0)
*May  4 00:45:02.033:         has spi 0x6875F644 and conn_id 0
*May  4 00:45:02.033:         lifetime of 2147483 seconds
*May  4 00:45:02.033:         lifetime of 4608000 kilobytes
*May  4 00:45:02.033:         outbound SA from 172.16.186.186 to 172.16.186.130 (f/i) 0/0
        (proxy 0.0.0.0 to 10.12.130.1)
*May  4 00:45:02.033:         has spi  0x29354010 and conn_id 0
*May  4 00:45:02.033:         lifetime of 2147483 seconds
*May  4 00:45:02.033:         lifetime of 4608000 kilobytes
*May  4 00:45:02.033: ISAKMP:(1008): sending packet to 172.16.186.130 
                      my_port 500 peer_port 500 (R) QM_IDLE
*May  4 00:45:02.033: ISAKMP:(1008):Node -1665883002, Input = IKE_MESG_FROM_IPSEC, IKE_SPI_REPLY
*May  4 00:45:02.033: ISAKMP:(1008):Old State = IKE_QM_SPI_STARVE  New State = IKE_QM_R_QM2
*May  4 00:45:02.033: IPSEC(key_engine): got a queue event with 1 KMI message(s)
*May  4 00:45:02.033: IPSec: Flow_switching Allocated flow for sibling 80000007
*May  4 00:45:02.033: IPSEC(policy_db_add_ident): src 0.0.0.0, dest 10.12.130.1, dest_port 0

*May  4 00:45:02.033: IPSEC(create_sa): sa created,
  (sa) sa_dest= 172.16.186.186, sa_proto= 50,
    sa_spi= 0x6875F644(1752561220),
    sa_trans= esp-3des esp-sha-hmac , sa_conn_id= 11
*May  4 00:45:02.033: IPSEC(create_sa): sa created,
  (sa) sa_dest= 172.16.186.130, sa_proto= 50,
    sa_spi= 0x29354010(691355664),
    sa_trans= esp-3des esp-sha-hmac , sa_conn_id= 12
*May  4 00:45:02.045: ISAKMP (0:1008): received packet from 172.16.186.130 
                      dport 500 sport 500 Global (R) QM_IDLE
*May  4 00:45:02.045: ISAKMP:(1008):deleting node -1665883002 error 
                       FALSE reason "QM done (await)"
*May  4 00:45:02.045: ISAKMP:(1008):Node -1665883002, Input = IKE_MESG_FROM_PEER, 
                      IKE_QM_EXCH
*May  4 00:45:02.045: ISAKMP:(1008):Old State = IKE_QM_R_QM2  New State = 
                      IKE_QM_PHASE2_COMPLETE
*May  4 00:45:02.045: IPSEC(key_engine): got a queue event with 1 KMI message(s)
*May  4 00:45:02.045: IPSEC(key_engine_enable_outbound): rec'd enable notify 
                      from ISAKMP
*May  4 00:45:02.045: IPSEC(key_engine_enable_outbound): enable SA with spi 691355664/50

Remote-Befehle für Easy VPN

  • debug crypto ipsec: Zeigt die IPsec-Aushandlungen von Phase 2 an.

  • debug crypto isakmp: Zeigt die ISAKMP-Aushandlungen von Phase 1 an. 

3-03-06-871W#debug crypto ipsec3-03-06-871W#debug crypto isakmp
*Jun  3 05:59:27.431: ISAKMP:(0): beginning Aggressive Mode exchange
*Jun  3 05:59:27.431: ISAKMP:(0): sending packet to 172.16.186.186 my_port 
                       500 peer_port 500 (I) AG_INIT_EXCH
*Jun  3 05:59:27.455: ISAKMP (0:0): received packet from 172.16.186.186 dport 
                       500 sport 500 Global (I) AG_INIT_EXCH
*Jun  3 05:59:27.455: ISAKMP:(0): processing SA payload. message ID = 0
*Jun  3 05:59:27.455: ISAKMP:(0): processing ID payload. message ID = 0
*Jun  3 05:59:27.455: ISAKMP (0:0): ID payload
        next-payload : 10
        type         : 1
        address      : 172.16.186.186
        protocol     : 17
        port         : 0
        length       : 12
*Jun  3 05:59:27.455: ISAKMP:(0):: peer matches *none* of the profiles
*Jun  3 05:59:27.455: ISAKMP:(0): processing vendor id payload
*Jun  3 05:59:27.455: ISAKMP:(0): vendor ID is Unity
*Jun  3 05:59:27.455: ISAKMP:(0): processing vendor id payload
*Jun  3 05:59:27.455: ISAKMP:(0): vendor ID is DPD
*Jun  3 05:59:27.455: ISAKMP:(0): processing vendor id payload
*Jun  3 05:59:27.455: ISAKMP:(0): speaking to another IOS box!
*Jun  3 05:59:27.455: ISAKMP:(0): local preshared key found
*Jun  3 05:59:27.455: ISAKMP : Scanning profiles for xauth ...
*Jun  3 05:59:27.455: ISAKMP:(0): Authentication by xauth preshared
*Jun  3 05:59:27.455: ISAKMP:(0):Checking ISAKMP transform 1 against priority 65515 policy
*Jun  3 05:59:27.455: ISAKMP:      encryption 3DES-CBC
*Jun  3 05:59:27.455: ISAKMP:      hash SHA
*Jun  3 05:59:27.455: ISAKMP:      default group 2
*Jun  3 05:59:27.459: ISAKMP:      auth XAUTHInitPreShared
*Jun  3 05:59:27.459: ISAKMP:      life type in seconds
*Jun  3 05:59:27.459: ISAKMP:      life duration (VPI) of  0x0 0x20 0xC4 0x9B
*Jun  3 05:59:27.459: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Jun  3 05:59:27.459: ISAKMP:(0):atts are not acceptable. Next payload is 0
*Jun  3 05:59:27.459: ISAKMP:(0):Checking ISAKMP transform 1 against priority 65516 policy
*Jun  3 05:59:27.459: ISAKMP:      encryption 3DES-CBC
*Jun  3 05:59:27.459: ISAKMP:      hash SHA
*Jun  3 05:59:27.459: ISAKMP:      default group 2
*Jun  3 05:59:27.459: ISAKMP:      auth XAUTHInitPreShared
*Jun  3 05:59:27.459: ISAKMP:      life type in seconds
*Jun  3 05:59:27.459: ISAKMP:      life duration (VPI) of  0x0 0x20 0xC4 0x9B
*Jun  3 05:59:27.459: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Jun  3 05:59:27.459: ISAKMP:(0):atts are not acceptable. Next payload is 0
*Jun  3 05:59:27.459: ISAKMP:(0):Checking ISAKMP transform 1 against priority 65517 policy
*Jun  3 05:59:27.459: ISAKMP:      encryption 3DES-CBC
*Jun  3 05:59:27.459: ISAKMP:      hash SHA
*Jun  3 05:59:27.459: ISAKMP:      default group 2
*Jun  3 05:59:27.459: ISAKMP:      auth XAUTHInitPreShared
*Jun  3 05:59:27.459: ISAKMP:      life type in seconds
*Jun  3 05:59:27.459: ISAKMP:      life duration (VPI) of  0x0 0x20 0xC4 0x9B
*Jun  3 05:59:27.459: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Jun  3 05:59:27.459: ISAKMP:(0):atts are not acceptable. Next payload is 0
*Jun  3 05:59:27.459: ISAKMP:(0):Checking ISAKMP transform 1 against priority 65518 policy
*Jun  3 05:59:27.459: ISAKMP:      encryption 3DES-CBC
*Jun  3 05:59:27.459: ISAKMP:      hash SHA
*Jun  3 05:59:27.459: ISAKMP:      default group 2
*Jun  3 05:59:27.459: ISAKMP:      auth XAUTHInitPreShared
*Jun  3 05:59:27.459: ISAKMP:      life type in seconds
*Jun  3 05:59:27.459: ISAKMP:      life duration (VPI) of  0x0 0x20 0xC4 0x9B
*Jun  3 05:59:27.459: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Jun  3 05:59:27.459: ISAKMP:(0):atts are not acceptable. Next payload is 0
*Jun  3 05:59:27.459: ISAKMP:(0):Checking ISAKMP transform 1 against priority 65519 policy
*Jun  3 05:59:27.459: ISAKMP:      encryption 3DES-CBC
*Jun  3 05:59:27.459: ISAKMP:      hash SHA
*Jun  3 05:59:27.459: ISAKMP:      default group 2
*Jun  3 05:59:27.459: ISAKMP:      auth XAUTHInitPreShared
*Jun  3 05:59:27.459: ISAKMP:      life type in seconds
*Jun  3 05:59:27.463: ISAKMP:      life duration (VPI) of  0x0 0x20 0xC4 0x9B
*Jun  3 05:59:27.463: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Jun  3 05:59:27.463: ISAKMP:(0):atts are not acceptable. Next payload is 0
*Jun  3 05:59:27.463: ISAKMP:(0):Checking ISAKMP transform 1 against priority 65520 policy
*Jun  3 05:59:27.463: ISAKMP:      encryption 3DES-CBC
*Jun  3 05:59:27.463: ISAKMP:      hash SHA
*Jun  3 05:59:27.463: ISAKMP:      default group 2
*Jun  3 05:59:27.463: ISAKMP:      auth XAUTHInitPreShared
*Jun  3 05:59:27.463: ISAKMP:      life type in seconds
*Jun  3 05:59:27.463: ISAKMP:      life duration (VPI) of  0x0 0x20 0xC4 0x9B
*Jun  3 05:59:27.463: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Jun  3 05:59:27.463: ISAKMP:(0):atts are not acceptable. Next payload is 0
*Jun  3 05:59:27.463: ISAKMP:(0):Checking ISAKMP transform 1 against priority 65521 policy
*Jun  3 05:59:27.463: ISAKMP:      encryption 3DES-CBC
*Jun  3 05:59:27.463: ISAKMP:      hash SHA
*Jun  3 05:59:27.463: ISAKMP:      default group 2
*Jun  3 05:59:27.463: ISAKMP:      auth XAUTHInitPreShared
*Jun  3 05:59:27.463: ISAKMP:      life type in seconds
*Jun  3 05:59:27.463: ISAKMP:      life duration (VPI) of  0x0 0x20 0xC4 0x9B
*Jun  3 05:59:27.463: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Jun  3 05:59:27.463: ISAKMP:(0):atts are not acceptable. Next payload is 0
*Jun  3 05:59:27.463: ISAKMP:(0):Checking ISAKMP transform 1 against priority 65522 policy
*Jun  3 05:59:27.463: ISAKMP:      encryption 3DES-CBC
*Jun  3 05:59:27.463: ISAKMP:      hash SHA
*Jun  3 05:59:27.463: ISAKMP:      default group 2
*Jun  3 05:59:27.463: ISAKMP:      auth XAUTHInitPreShared
*Jun  3 05:59:27.463: ISAKMP:      life type in seconds
*Jun  3 05:59:27.463: ISAKMP:      life duration (VPI) of  0x0 0x20 0xC4 0x9B
*Jun  3 05:59:27.463: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Jun  3 05:59:27.463: ISAKMP:(0):atts are not acceptable. Next payload is 0
*Jun  3 05:59:27.463: ISAKMP:(0):Checking ISAKMP transform 1 against priority 65523 policy
*Jun  3 05:59:27.463: ISAKMP:      encryption 3DES-CBC
*Jun  3 05:59:27.463: ISAKMP:      hash SHA
*Jun  3 05:59:27.463: ISAKMP:      default group 2
*Jun  3 05:59:27.463: ISAKMP:      auth XAUTHInitPreShared
*Jun  3 05:59:27.463: ISAKMP:      life type in seconds
*Jun  3 05:59:27.463: ISAKMP:      life duration (VPI) of  0x0 0x20 0xC4 0x9B
*Jun  3 05:59:27.463: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Jun  3 05:59:27.463: ISAKMP:(0):atts are not acceptable. Next payload is 0
*Jun  3 05:59:27.463: ISAKMP:(0):Checking ISAKMP transform 1 against priority 65524 policy
*Jun  3 05:59:27.467: ISAKMP:      encryption 3DES-CBC
*Jun  3 05:59:27.467: ISAKMP:      hash SHA
*Jun  3 05:59:27.467: ISAKMP:      default group 2
*Jun  3 05:59:27.467: ISAKMP:      auth XAUTHInitPreShared
*Jun  3 05:59:27.467: ISAKMP:      life type in seconds
*Jun  3 05:59:27.467: ISAKMP:      life duration (VPI) of  0x0 0x20 0xC4 0x9B
*Jun  3 05:59:27.467: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Jun  3 05:59:27.467: ISAKMP:(0):atts are not acceptable. Next payload is 0
*Jun  3 05:59:27.467: ISAKMP:(0):Checking ISAKMP transform 1 against priority 65525 policy
*Jun  3 05:59:27.467: ISAKMP:      encryption 3DES-CBC
*Jun  3 05:59:27.467: ISAKMP:      hash SHA
*Jun  3 05:59:27.467: ISAKMP:      default group 2
*Jun  3 05:59:27.467: ISAKMP:      auth XAUTHInitPreShared
*Jun  3 05:59:27.467: ISAKMP:      life type in seconds
*Jun  3 05:59:27.467: ISAKMP:      life duration (VPI) of  0x0 0x20 0xC4 0x9B
*Jun  3 05:59:27.467: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Jun  3 05:59:27.467: ISAKMP:(0):atts are not acceptable. Next payload is 0
*Jun  3 05:59:27.467: ISAKMP:(0):Checking ISAKMP transform 1 against priority 65526 policy
*Jun  3 05:59:27.467: ISAKMP:      encryption 3DES-CBC
*Jun  3 05:59:27.467: ISAKMP:      hash SHA
*Jun  3 05:59:27.467: ISAKMP:      default group 2
*Jun  3 05:59:27.467: ISAKMP:      auth XAUTHInitPreShared
*Jun  3 05:59:27.467: ISAKMP:      life type in seconds
*Jun  3 05:59:27.467: ISAKMP:      life duration (VPI) of  0x0 0x20 0xC4 0x9B
*Jun  3 05:59:27.467: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Jun  3 05:59:27.467: ISAKMP:(0):atts are not acceptable. Next payload is 0
*Jun  3 05:59:27.467: ISAKMP:(0):Checking ISAKMP transform 1 against priority 65527 policy
*Jun  3 05:59:27.467: ISAKMP:      encryption 3DES-CBC
*Jun  3 05:59:27.467: ISAKMP:      hash SHA
*Jun  3 05:59:27.467: ISAKMP:      default group 2
*Jun  3 05:59:27.467: ISAKMP:      auth XAUTHInitPreShared
*Jun  3 05:59:27.467: ISAKMP:      life type in seconds
*Jun  3 05:59:27.467: ISAKMP:      life duration (VPI) of  0x0 0x20 0xC4 0x9B
*Jun  3 05:59:27.467: ISAKMP:(0):atts are acceptable. Next payload is 0
*Jun  3 05:59:27.467: ISAKMP (0:0): vendor ID is NAT-T v7
*Jun  3 05:59:27.467: ISAKMP:(0): processing KE payload. message ID = 0
*Jun  3 05:59:27.475: ISAKMP:(0): processing NONCE payload. message ID = 0
*Jun  3 05:59:27.475: ISAKMP:(2006): processing HASH payload. message ID = 0
*Jun  3 05:59:27.475: ISAKMP:(2006):SA authentication status:
        authenticated
*Jun  3 05:59:27.475: ISAKMP:(2006):SA has been authenticated with 172.16.186.186

*Jun  3 05:59:27.475: ISAKMP:(2006):Send initial contact
*Jun  3 05:59:27.475: ISAKMP:(2006): sending packet to 172.16.186.186 
                      my_port 500 peer_port 500 (I) AG_INIT_EXCH
*Jun  3 05:59:27.479: ISAKMP:(2006):Input = IKE_MESG_FROM_PEER, IKE_AM_EXCH
*Jun  3 05:59:27.479: ISAKMP:(2006):Old State = IKE_I_AM1  New State = IKE_P1_COMPLETE

*Jun  3 05:59:27.479: ISAKMP:(2006):Need XAUTH
*Jun  3 05:59:27.479: ISAKMP:(2006):Input = IKE_MESG_INTERNAL, IKE_PHASE1_COMPLETE


!--- Phase 1 (ISAKMP) is complete.

*Jun  3 05:59:27.479: ISAKMP:(2006):Old State = IKE_P1_COMPLETE  New State = IKE_P1_COMPLETE


!--- Xauth initiates.

*Jun  3 05:59:27.479: ISAKMP (0:2006): received packet from 172.16.186.186 
                      dport 500 sport 500 Global (I) CONF_XAUTH
*Jun  3 05:59:27.483: ISAKMP: set new node 850198625 to CONF_XAUTH

*Jun  3 05:59:27.487: ISAKMP:(2006):processing transaction payload from 
                      172.16.186.186. message ID = -1517216966
*Jun  3 05:59:27.487: ISAKMP: Config payload REQUEST
*Jun  3 05:59:27.487: ISAKMP:(2006):checking request:
*Jun  3 05:59:27.487: ISAKMP:    XAUTH_USER_NAME_V2
*Jun  3 05:59:27.487: ISAKMP:    XAUTH_USER_PASSWORD_V2
*Jun  3 05:59:27.487: ISAKMP:(2006):Xauth process request
*Jun  3 05:59:27.487: ISAKMP:(2006):Input = IKE_MESG_FROM_PEER, IKE_CFG_REQUEST
*Jun  3 05:59:27.487: ISAKMP:(2006):Old State = IKE_P1_COMPLETE  
                      New State = IKE_XAUTH_REPLY_AWAIT

*Jun  3 05:59:30.242: EZVPN(ez): Pending XAuth Request, Please enter the 
                      following command:
*Jun  3 05:59:30.242: EZVPN: crypto ipsec client ezvpn xauth



!--- Enter the crypto ipsec client ezvpn xauth command. 

3-03-06-871W#crypto ipsec client ezvpn xauth

Username: cisco
Password:  
      
      

*Jun  3 06:02:46.498:         username: cisco
*Jun  3 06:02:46.498:         password: <omitted>
*Jun  3 06:02:46.498: ISAKMP:(2008): responding to peer config from 
                      172.16.186.186. ID = -605466681
*Jun  3 06:02:46.498: ISAKMP:(2008): sending packet to 172.16.186.186 my_port 
                      500 peer_port 500 (I) CONF_XAUTH
*Jun  3 06:02:46.498: ISAKMP:(2008):deleting node -605466681 error FALSE reason 
                       "Done with xauth request/reply exchange"
*Jun  3 06:02:46.498: ISAKMP:(2008):Input = IKE_MESG_INTERNAL, IKE_XAUTH_REPLY_ATTR
*Jun  3 06:02:46.498: ISAKMP:(2008):Old State = IKE_XAUTH_REPLY_AWAIT  New State = 
                      IKE_XAUTH_REPLY_SENT

*Jun  3 06:02:46.502: ISAKMP (0:2008): received packet from 172.16.186.186 dport 
                      500 sport 500 Global (I) CONF_XAUTH
*Jun  3 06:02:46.502: ISAKMP: set new node 1283697340 to CONF_XAUTH
*Jun  3 06:02:46.502: ISAKMP:(2008):processing transaction payload from 
                      172.16.186.186. message ID = 1283697340
*Jun  3 06:02:46.502: ISAKMP: Config payload SET
*Jun  3 06:02:46.502: ISAKMP:(2008):Xauth process set, status = 1
*Jun  3 06:02:46.502: ISAKMP:(2008):checking SET:
*Jun  3 06:02:46.502: ISAKMP:    XAUTH_STATUS_V2 XAUTH-OK
*Jun  3 06:02:46.502: ISAKMP:(2008):attributes sent in message:
*Jun  3 06:02:46.502:         Status: 1
*Jun  3 06:02:46.506: ISAKMP:(2008): sending packet to 172.16.186.186 
                      my_port 500 peer_port 500 (I) CONF_XAUTH
*Jun  3 06:02:46.506: ISAKMP:(2008):deleting node 1283697340 error FALSE 
                       reason "No Error"
*Jun  3 06:02:46.506: ISAKMP:(2008):Input = IKE_MESG_FROM_PEER, IKE_CFG_SET
*Jun  3 06:02:46.506: ISAKMP:(2008):Old State = IKE_XAUTH_REPLY_SENT  
                      New State = IKE_P1_COMPLETE

*Jun  3 06:02:46.506: ISAKMP:(2008):Need config/address
*Jun  3 06:02:46.506: ISAKMP: set new node 104696831 to CONF_ADDR
*Jun  3 06:02:46.506: ISAKMP: Sending APPLICATION_VERSION string: Cisco IOS 
                      Software, C870 Software (C870-ADVIPSERVICESK9-M), 
                      Experimental Version 12.4(20060201:210845) 
                      [prchadal-CSCsb79792-haw_t_pi4 101]
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Thu 02-Feb-06 03:19 by prchadal
*Jun  3 06:02:46.506: ISAKMP:(2008): initiating peer config to 172.16.186.186. 
                      ID = 104696831
*Jun  3 06:02:46.506: ISAKMP:(2008): sending packet to 172.16.186.186 my_port 
                      500 peer_port 500 (I) CONF_ADDR
*Jun  3 06:02:46.506: ISAKMP:(2008):Input = IKE_MESG_INTERNAL, IKE_PHASE1_COMPLETE
*Jun  3 06:02:46.506: ISAKMP:(2008):Old State = IKE_P1_COMPLETE  New State = 
                      IKE_CONFIG_MODE_REQ_SENT

*Jun  3 06:02:46.510: ISAKMP (0:2008): received packet from 172.16.186.186 dport 
                      500 sport 500 Global (I) CONF_ADDR
*Jun  3 06:02:46.514: ISAKMP:(2008):processing transaction payload from 
                      172.16.186.186. message ID = 104696831
*Jun  3 06:02:46.514: ISAKMP: Config payload REPLY
*Jun  3 06:02:46.514: ISAKMP(0:2008) process config reply
*Jun  3 06:02:46.514: ISAKMP:(2008):deleting node 104696831 error 
                      FALSE reason "Transaction mode done"
*Jun  3 06:02:46.514: ISAKMP:(2008):Input = IKE_MESG_FROM_PEER, IKE_CFG_REPLY
*Jun  3 06:02:46.514: ISAKMP:(2008):Old State = IKE_CONFIG_MODE_REQ_SENT  
                      New State = IKE_P1_COMPLETE

*Jun  3 06:02:46.518: insert of map into mapdb AVL failed, map + ace pair 
                      already exists on the mapdb
*Jun  3 06:02:46.518: ISAKMP:(2008):Input = IKE_MESG_INTERNAL, IKE_PHASE1_COMPLETE
*Jun  3 06:02:46.518: ISAKMP:(2008):Old State = IKE_P1_COMPLETE  New State = 
                      IKE_P1_COMPLETE

*Jun  3 06:02:46.522: IPSEC(sa_request): ,
  (key eng. msg.) OUTBOUND local= 172.16.186.130, remote= 172.16.186.186,
    local_proxy= 10.12.130.1/255.255.255.255/0/0 (type=1),
    remote_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4),
    protocol= ESP, transform= NONE  (Tunnel),
    lifedur= 2147483s and 4608000kb,
    spi= 0xA0FC0985(2700872069), conn_id= 0, keysize= 128, flags= 0x2000
*Jun  3 06:02:46.522: IPSEC(sa_request): ,
  (key eng. msg.) OUTBOUND local= 172.16.186.130, remote= 172.16.186.186,
    local_proxy= 10.12.130.1/255.255.255.255/0/0 (type=1),
    remote_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4),
    protocol= ESP, transform= NONE  (Tunnel),
    lifedur= 2147483s and 4608000kb,
    spi= 0xBB426C9(196355785), conn_id= 0, keysize= 128, flags= 0x2000
*Jun  3 06:02:46.522: IPSEC(sa_request): ,
  (key eng. msg.) OUTBOUND local= 172.16.186.130, remote= 172.16.186.186,
    local_proxy= 10.12.130.1/255.255.255.255/0/0 (type=1),
    remote_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4),
    protocol= ESP, transform= NONE  (Tunnel),
    lifedur= 2147483s and 4608000kb,
    spi= 0xB349BB06(3007953670), conn_id= 0, keysize= 192, flags= 0x2000
*Jun  3 06:02:46.522: IPSEC(sa_request): ,
  (key eng. msg.) OUTBOUND local= 172.16.186.130, remote= 172.16.186.186,
    local_proxy= 10.12.130.1/255.255.255.255/0/0 (type=1),
    remote_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4),
    protocol= ESP, transform= NONE  (Tunnel),
    lifedur= 2147483s and 4608000kb,
    spi= 0xC114CFB8(3239366584), conn_id= 0, keysize= 192, flags= 0x2000
*Jun  3 06:02:46.522: IPSEC(sa_request): ,
  (key eng. msg.) OUTBOUND local= 172.16.186.130, remote= 172.16.186.186,
    local_proxy= 10.12.130.1/255.255.255.255/0/0 (type=1),
    remote_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4),
    protocol= ESP, transform= NONE  (Tunnel),
    lifedur= 2147483s and 4608000kb,
    spi= 0x2ED87C62(785939554), conn_id= 0, keysize= 256, flags= 0x2000
*Jun  3 06:02:46.522: IPSEC(sa_request): ,
  (key eng. msg.) OUTBOUND local= 172.16.186.130, remote= 172.16.186.186,
    local_proxy= 10.12.130.1/255.255.255.255/0/0 (type=1),
    remote_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4),
    protocol= ESP, transform= NONE  (Tunnel),
    lifedur= 2147483s and 4608000kb,
    spi= 0x226A6FF3(577400819), conn_id= 0, keysize= 256, flags= 0x2000
*Jun  3 06:02:46.522: IPSEC(sa_request): ,
  (key eng. msg.) OUTBOUND local= 172.16.186.130, remote= 172.16.186.186,
    local_proxy= 10.12.130.1/255.255.255.255/0/0 (type=1),
    remote_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4),
    protocol= ESP, transform= NONE  (Tunnel),
    lifedur= 2147483s and 4608000kb,
    spi= 0x29354010(691355664), conn_id= 0, keysize= 0, flags= 0x2000
*Jun  3 06:02:46.526: IPSEC(sa_request): ,
  (key eng. msg.) OUTBOUND local= 172.16.186.130, remote= 172.16.186.186,
    local_proxy= 10.12.130.1/255.255.255.255/0/0 (type=1),
    remote_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4),
    protocol= ESP, transform= NONE  (Tunnel),
    lifedur= 2147483s and 4608000kb,
    spi= 0x12111E5C(303111772), conn_id= 0, keysize= 0, flags= 0x2000
*Jun  3 06:02:46.526: IPSEC(sa_request): ,
  (key eng. msg.) OUTBOUND local= 172.16.186.130, remote= 172.16.186.186,
    local_proxy= 10.12.130.1/255.255.255.255/0/0 (type=1),
    remote_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4),
    protocol= ESP, transform= NONE  (Tunnel),
    lifedur= 2147483s and 4608000kb,
    spi= 0x98084B9A(2550680474), conn_id= 0, keysize= 0, flags= 0x2000
*Jun  3 06:02:46.526: IPSEC(sa_request): ,
  (key eng. msg.) OUTBOUND local= 172.16.186.130, remote= 172.16.186.186,
    local_proxy= 10.12.130.1/255.255.255.255/0/0 (type=1),
    remote_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4),
    protocol= ESP, transform= NONE  (Tunnel),
    lifedur= 2147483s and 4608000kb,
    spi= 0x9442501B(2487373851), conn_id= 0, keysize= 0, flags= 0x0
*Jun  3 06:02:46.526: ISAKMP: set new node 0 to QM_IDLE
*Jun  3 06:02:46.526: ISAKMP:(2008): sitting IDLE. Starting QM immediately (QM_IDLE)
*Jun  3 06:02:46.526: ISAKMP:(2008):beginning Quick Mode exchange, M-ID of -1665883002
*Jun  3 06:02:46.526: ISAKMP:(2008):QM Initiator gets spi
*Jun  3 06:02:46.530: ISAKMP:(2008): sending packet to 172.16.186.186 my_port 
                      500 peer_port 500 (I) QM_IDLE
*Jun  3 06:02:46.530: ISAKMP:(2008):Node -1665883002, Input = IKE_MESG_INTERNAL, 
                      IKE_INIT_QM
*Jun  3 06:02:46.530: ISAKMP:(2008):Old State = IKE_QM_READY  New State = IKE_QM_I_QM1
*Jun  3 06:02:46.538: ISAKMP (0:2008): received packet from 172.16.186.186 
                      dport 500 sport 500 Global (I) QM_IDLE
*Jun  3 06:02:46.538: ISAKMP:(2008): processing HASH payload. message ID = -1665883002
*Jun  3 06:02:46.538: ISAKMP:(2008): processing SA payload. message ID = -1665883002
*Jun  3 06:02:46.538: ISAKMP:(2008):Checking IPSec proposal 1
*Jun  3 06:02:46.538: ISAKMP: transform 1, ESP_3DES
*Jun  3 06:02:46.538: ISAKMP:   attributes in transform:
*Jun  3 06:02:46.538: ISAKMP:      encaps is 1 (Tunnel)
*Jun  3 06:02:46.538: ISAKMP:      SA life type in seconds
*Jun  3 06:02:46.538: ISAKMP:      SA life duration (VPI) of  0x0 0x20 0xC4 0x9B
*Jun  3 06:02:46.538: ISAKMP:      SA life type in kilobytes
*Jun  3 06:02:46.538: ISAKMP:      SA life duration (VPI) of  0x0 0x46 0x50 0x0
*Jun  3 06:02:46.542: ISAKMP:      authenticator is HMAC-SHA
*Jun  3 06:02:46.542: ISAKMP:(2008):atts are acceptable.
*Jun  3 06:02:46.542: IPSEC(validate_proposal_request): proposal part #1
*Jun  3 06:02:46.542: IPSEC(validate_proposal_request): proposal part #1,
  (key eng. msg.) INBOUND local= 172.16.186.130, remote= 172.16.186.186,
    local_proxy= 10.12.130.1/255.255.255.255/0/0 (type=1),
    remote_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4),
    protocol= ESP, transform= esp-3des esp-sha-hmac  (Tunnel),
    lifedur= 0s and 0kb,
    spi= 0x0(0), conn_id= 0, keysize= 0, flags= 0x0
*Jun  3 06:02:46.542: Crypto mapdb : proxy_match
        src addr     : 10.12.130.1
        dst addr     : 0.0.0.0
        protocol     : 0
        src port     : 0
        dst port     : 0
*Jun  3 06:02:46.542: ISAKMP:(2008): processing NONCE payload. message ID = -1665883002
*Jun  3 06:02:46.542: ISAKMP:(2008): processing ID payload. message ID = -1665883002
*Jun  3 06:02:46.542: ISAKMP:(2008): processing ID payload. message ID = -1665883002
*Jun  3 06:02:46.542: ISAKMP:(2008): processing NOTIFY RESPONDER_LIFETIME protocol 3
        spi 1752561220, message ID = -1665883002, sa = 83BCC9DC
*Jun  3 06:02:46.542: ISAKMP:(2008):SA authentication status:
        authenticated
*Jun  3 06:02:46.542: ISAKMP:(2008): processing responder lifetime
*Jun  3 06:02:46.542: ISAKMP (2008): responder lifetime of 3600s
*Jun  3 06:02:46.542: ISAKMP:(2008): Creating IPSec SAs
*Jun  3 06:02:46.542:         inbound SA from 172.16.186.186 to 172.16.186.130 (f/i) 0/ 0
        (proxy 0.0.0.0 to 10.12.130.1)
*Jun  3 06:02:46.542:         has spi 0x29354010 and conn_id 0
*Jun  3 06:02:46.542:         lifetime of 3590 seconds
*Jun  3 06:02:46.542:         lifetime of 4608000 kilobytes
*Jun  3 06:02:46.546:         outbound SA from 172.16.186.130 to 172.16.186.186 (f/i) 0/0
        (proxy 10.12.130.1 to 0.0.0.0)
*Jun  3 06:02:46.546:         has spi  0x6875F644 and conn_id 0
*Jun  3 06:02:46.546:         lifetime of 3590 seconds
*Jun  3 06:02:46.546:         lifetime of 4608000 kilobytes
*Jun  3 06:02:46.546: ISAKMP:(2008): sending packet to 172.16.186.186 
                      my_port 500 peer_port 500 (I) QM_IDLE
*Jun  3 06:02:46.546: ISAKMP:(2008):deleting node -1665883002 error FALSE 
                      reason "No Error"
*Jun  3 06:02:46.546: ISAKMP:(2008):Node -1665883002, Input = IKE_MESG_FROM_PEER, 
                      IKE_QM_EXCH
*Jun  3 06:02:46.546: ISAKMP:(2008):Old State = IKE_QM_I_QM1  New State = 
                      IKE_QM_PHASE2_COMPLETE
*Jun  3 06:02:46.546: IPSEC(key_engine): got a queue event with 1 KMI message(s)
*Jun  3 06:02:46.546: Crypto mapdb : proxy_match
        src addr     : 10.12.130.1
        dst addr     : 0.0.0.0
        protocol     : 0
        src port     : 0
        dst port     : 0
*Jun  3 06:02:46.546: IPSEC(crypto_ipsec_sa_find_ident_head): reconnecting with 
                      the same proxies and peer 172.16.186.186
*Jun  3 06:02:46.546: IPSEC(policy_db_add_ident): src 10.12.130.1, dest 0.0.0.0, 
                      dest_port 0

*Jun  3 06:02:46.546: IPSEC(create_sa): sa created,
  (sa) sa_dest= 172.16.186.130, sa_proto= 50,
    sa_spi= 0x29354010(691355664),
    sa_trans= esp-3des esp-sha-hmac , sa_conn_id= 11
*Jun  3 06:02:46.546: IPSEC(create_sa): sa created,
  (sa) sa_dest= 172.16.186.186, sa_proto= 50,
    sa_spi= 0x6875F644(1752561220),
    sa_trans= esp-3des esp-sha-hmac , sa_conn_id= 12
*Jun  3 06:02:46.550: IPSEC(update_current_outbound_sa): 
updated peer 172.16.186.186 current outbound sa to SPI 6875F644
*Jun  3 06:02:46.550: %CRYPTO-6-EZVPN_CONNECTION_UP: (Client)  
User=  Group=vpngrp  Client_public_addr=172.16.186.130  
Server_public_addr=172.16.186.186  NEM_Remote_Subnets=10.12.130.1/255.255.255.255
*Jun  3 06:02:47.130: ISAKMP: set new node -1866551769 to QM_IDLE

Zugehörige Informationen

Revisionsverlauf

Überarbeitung Veröffentlichungsdatum Kommentare
1.0
13-Apr-2009
Erstveröffentlichung

War dieses Dokument hilfreich?

FeedbackFeedback

Cisco kontaktieren