Cisco vPath Ecosystem, Release 2.5

Installing and Configuring Cisco vWAAS

Installing and Configuring Cisco vWAAS

You must first install the vWAAS VM on the VMware server using vSphere before you configure vWAAS.

To install the Cisco vWAAS VM, see the installation instructions in the Cisco Wide Area Application Services vWAAS Installation and Configuration Guide at the following location:

Installing vWAAS

After you install the Cisco vWAAS VM, you must configure the following vWAAS settings:

IP address and netmask

Default gateway and primary interface

Enterprise license

Central Manager address

Centralized Management System (CMS)

Interception (Web Cache Communication Protocol (WCCP) or other)

To configure these settings, see the configuration instructions in the Cisco Wide Area Application Services vWAAS Installation and Configuration Guide at the following location:

Configuring vWAAS