Password: 
Password OK

-----------------------------------------------------------------------
Cisco Router and Security Device Manager (SDM) is installed on this device. 
This feature requires the one-time use of the username "cisco" 
with the password "cisco". The default username and password have a privilege l.

Please change these publicly known initial credentials using SDM or the IOS CLI 
Here are the Cisco IOS commands.

username <myuser>  privilege 15 secret 0 <mypassword>
no username cisco

Replace <myuser> and <mypassword> with the username and password you want to us 

For more information about SDM please follow the instructions in the QUICK STAR 
GUIDE for your router or go to http://www.cisco.com/go/sdm 
-----------------------------------------------------------------------


User Access Verification

Username: cisco
Password: 
MANB-2821-REM3#sh run
Building configuration...

Current configuration : 8816 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname MANB-2821-REM3
!
boot-start-marker
boot system flash c2800nm-ipvoice-mz.124-11.XW3
boot-end-marker
!
logging buffered 51200 warnings
!
no aaa new-model
memory-size iomem 15
clock timezone I 6
no network-clock-participate slot 1 
!
!
!
ip cef    
no ip dhcp use vrf connected
ip dhcp excluded-address 10.10.203.1 10.10.203.33
ip dhcp excluded-address 10.10.203.36 10.10.203.254
ip dhcp excluded-address 10.10.253.33 10.10.253.56
!
ip dhcp pool MANB_REM3_Voice1_VLAN253
   network 10.10.253.32 255.255.255.224
   option 150 ip 10.10.20.6 
   default-router 10.10.253.33 
   domain-name gbemea.lab
   dns-server 10.10.20.10 
!
ip dhcp pool MANB_REM3_Data1_VLAN203
   network 10.10.203.32 255.255.255.240
   default-router 10.10.203.33 
   domain-name gbemea.lab
   dns-server 10.10.20.10 
   option 150 ip 10.10.20.6 
!
!
no ip domain lookup
ip domain name gbemea.lab
ip host MANB-CORES 10.10.20.6
vlan ifdescr detail
multilink bundle-name authenticated
!
isdn switch-type basic-net3
!
!
!
voice service voip 
 allow-connections sip to sip
 sip
  registrar server expires max 600 min 60
  redirect contact order best-match
!
!
voice class codec 1
 codec preference 1 g711alaw
 codec preference 2 g729r8
!
!
!
!
!
!         
!
!
!
!
voice register global
 max-dn 192
 max-pool 48
!
voice register pool  1
 id mac 0015.2B34.0CBA
 number 1 8495001
 number 2 8491750
 voice-class codec 1
 no vad
!
!
voice translation-rule 10
 rule 1 /^200\(...\)/ /8495\1/
 rule 2 /^03728200\(...\)/ /8495\1/
!
!
voice translation-profile test
 translate called 10
!
!
voice-card 0
 no dspfarm
 dsp services dspfarm
!
voice-card 1
 no dspfarm
!
!
!
username cisco privilege 15 secret 5 $1$Ns/D$GXuKrVuucDKct61WRBOah1
archive
 log config
  hidekeys
!
!
!
class-map match-any CRITICAL-DATA
 match ip dscp cs6 
 match ip dscp af21 
 match ip dscp cs2 
class-map match-any VIDEO
 match ip dscp af41  af42  af43 
class-map match-all VOICE
 match ip dscp ef 
class-map match-any CALL-SIGNALING
 match ip dscp cs3 
!
!
policy-map WAN-EDGE
 class CALL-SIGNALING
  bandwidth percent 5
  set ip dscp cs5
 class CRITICAL-DATA
  bandwidth percent 10
  random-detect dscp-based
 class VOICE
  priority percent 15
 class VIDEO
  priority percent 40
  set ip dscp cs5
 class class-default
  fair-queue
!
!         
!
!
!
interface Multilink3
 description connected to 7206-PE3 S1/1
 bandwidth 384
 ip address 11.3.3.5 255.255.255.252
 ppp multilink
 ppp multilink group 3
 max-reserved-bandwidth 100
 service-policy output WAN-EDGE
 ip rsvp bandwidth
 ip rsvp signalling dscp 24
!
interface GigabitEthernet0/0
 description connected to the Mgmt Sw 3550
 ip address 10.10.10.7 255.255.255.0
 duplex full
 speed 100
!
interface GigabitEthernet0/1
 description connected to B3550-1 F0/13
 no ip address
 load-interval 30
 duplex auto
 speed auto
 no keepalive
!
interface GigabitEthernet0/1.203
 description Connected to VLAN203 REM3
 encapsulation dot1Q 203
 ip address 10.10.203.33 255.255.255.240
!
interface GigabitEthernet0/1.213
 description Connected to VLAN213 REM3 SITE
 encapsulation dot1Q 213
 ip address 10.10.203.17 255.255.255.240
!
interface GigabitEthernet0/1.253
 description Connected to VLAN253 REM3 SITE
 encapsulation dot1Q 253
 ip address 10.10.253.33 255.255.255.224
!
interface Serial0/0/0
 description connected to 7206-PE3 S1/1
 bandwidth 384
 no ip address
 encapsulation ppp
 load-interval 30
 no fair-queue
 ppp multilink
 ppp multilink group 3
 max-reserved-bandwidth 100
!
interface Serial0/0/1
 no ip address
 shutdown
 clock rate 2000000
!
interface BRI1/0/0
 no ip address
 isdn switch-type basic-net3
 isdn point-to-point-setup
 isdn incoming-voice voice
 isdn bind-l3 ccm-manager service mgcp
 isdn static-tei 0
!
interface BRI1/0/1
 no ip address
 isdn switch-type basic-net3
 isdn point-to-point-setup
 isdn incoming-voice voice
 isdn bind-l3 ccm-manager service mgcp
 isdn static-tei 0
!
interface BRI1/1/0
 no ip address
 isdn switch-type basic-net3
 isdn point-to-point-setup
 isdn incoming-voice voice
 isdn bind-l3 ccm-manager service mgcp
 isdn static-tei 0
!
interface BRI1/1/1
 no ip address
 isdn switch-type basic-net3
 isdn point-to-point-setup
 isdn incoming-voice voice
 isdn bind-l3 ccm-manager service mgcp
 isdn static-tei 0
!
router eigrp 103
 network 10.10.203.16 0.0.0.15
 network 10.10.203.32 0.0.0.15
 network 10.10.253.32 0.0.0.31
 network 11.3.3.4 0.0.0.3
 default-metric 10000 100 255 1 1500
 no auto-summary
!
ip route 10.10.10.0 255.255.255.0 10.10.10.1
!
!
ip http server
ip http access-class 23
ip http authentication local
ip http timeout-policy idle 60 life 86400 requests 10000
!
ip access-list standard cisco
!
snmp-server community cisco RO
snmp-server community view RO
snmp-server community public RO
snmp-server community private RW
snmp-server system-shutdown
snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart
snmp-server enable traps tty
!
!
!
control-plane
!
!
!
voice-port 1/0/0
 compand-type a-law
 cptone DE
!
voice-port 1/0/1
 compand-type a-law
 cptone DE
!
voice-port 1/1/0
 compand-type a-law
 cptone DE
!
voice-port 1/1/1
 compand-type a-law
 cptone DE
!
ccm-manager fallback-mgcp 
ccm-manager mgcp
ccm-manager music-on-hold
ccm-manager config server 10.10.20.6  
ccm-manager config
!
mgcp
mgcp call-agent MANB-CORES 2427 service-type mgcp version 0.1
mgcp dtmf-relay voip codec all mode out-of-band
mgcp rtp unreachable timeout 1000 action notify
mgcp modem passthrough voip mode nse
mgcp package-capability rtp-package
mgcp package-capability sst-package
mgcp package-capability pre-package
no mgcp package-capability res-package
no mgcp package-capability fxr-package
no mgcp timer receive-rtcp
mgcp sdp simple
mgcp fax t38 inhibit
mgcp rtp payload-type g726r16 static
!
mgcp profile default
!
sccp local Multilink3
sccp ccm 10.10.20.6 identifier 1 priority 1 version 5.0.1 
sccp
!
sccp ccm group 1
 bind interface Multilink3
 associate ccm 1 priority 1
 associate profile 1 register MANB-2821-REM3
 associate profile 2 register XMANB-2821-rem3
!
dspfarm profile 2 transcode  
 codec g711ulaw
 codec g711alaw
 codec g729ar8
 codec g729abr8
 codec pass-through
 rsvp
 maximum sessions 8
 associate application SCCP
!
dspfarm profile 1 conference  
 codec g711ulaw
 codec g711alaw
 codec g729ar8
 codec g729abr8
 codec g729r8
 codec g729br8
 maximum sessions 2
 associate application SCCP
!
!
dial-peer voice 200 voip
 description VOIP call over WAN to Central
 destination-pattern 844....
 session protocol sipv2
 session target ipv4:10.10.20.1
 dtmf-relay rtp-nte
!
dial-peer voice 201 voip
 description VOIP call over WAN to Rem#1
 destination-pattern 844....
 session protocol sipv2
 session target ipv4:10.10.251.33
 dtmf-relay rtp-nte
!         
dial-peer voice 202 voip
 description VOIP call over WAN to Rem2
 destination-pattern 833....
 session protocol sipv2
 session target ipv4:10.10.252.33
 dtmf-relay rtp-nte
!
dial-peer voice 204 voip
 description VOIP call over WAN to Rem#4
 destination-pattern 834....
 session protocol sipv2
 session target ipv4:10.10.254.33
 dtmf-relay rtp-nte
!
dial-peer voice 205 voip
 description VOIP call over WAN to Rem#5
 destination-pattern 839....
 session protocol sipv2
 session target ipv4:10.10.255.33
 dtmf-relay rtp-nte
!
dial-peer voice 150 pots
 description Local Calls
 translation-profile incoming test
 shutdown
 destination-pattern 0......
 incoming called-number .T
 direct-inward-dial
 port 1/0/0
!
!
!
call-manager-fallback
 max-conferences 4 gain -6
 transfer-system full-consult
 ip source-address 10.10.253.33 port 2000
 max-ephones 5
 max-dn 10 dual-line
 transfer-pattern 0......
!
banner login ^C
-----------------------------------------------------------------------
Cisco Router and Security Device Manager (SDM) is installed on this device. 
This feature requires the one-time use of the username "cisco" 
with the password "cisco". The default username and password have a privilege l.
          
Please change these publicly known initial credentials using SDM or the IOS CLI 
Here are the Cisco IOS commands.

username <myuser>  privilege 15 secret 0 <mypassword>
no username cisco

Replace <myuser> and <mypassword> with the username and password you want to us 

For more information about SDM please follow the instructions in the QUICK STAR 
GUIDE for your router or go to http://www.cisco.com/go/sdm 
-----------------------------------------------------------------------
^C
!
line con 0
 exec-timeout 0 0
 login local
line aux 0
line vty 0 4
 access-class 23 in
 privilege level 15
 login local
 transport input telnet
line vty 5 15
 access-class 23 in
 privilege level 15
 login local
 transport input telnet
!
scheduler allocate 20000 1000
!
end

