本檔案介紹如何在主幹 — 枝葉交換矩陣中的Cisco Nexus 9000系列交換器上使用BGP EVPN控制平面配置和驗證VXLAN。
思科建議您瞭解以下主題:
本文中的資訊係根據以下軟體和硬體版本:
本文中的資訊是根據特定實驗室環境內的裝置所建立。文中使用到的所有裝置皆從已清除(預設)的組態來啟動。如果您的網路運作中,請確保您瞭解任何指令可能造成的影響。
附註:本文檔中的配置適用於獨立NX-OS模式下的Nexus 9000雲擴展平台( — EX、-FX、-FX2、-FX3、-GX、-GX2及更高版本)。它不適用於ACI模式下的Nexus 9000交換機。
| 字詞 |
說明 |
| VXLAN |
虛擬可擴充LAN:它通過採用UDP內MAC封裝(UDP埠4789)的路由IP底層提供第2層和第3層重疊服務。 |
| VNI |
VXLAN網路識別碼:24位資料段ID。L2 VNI對應到VLAN(橋接域)。 L3 VNI對映到VRF。 |
| VTEP |
VXLAN通道端點:封裝和解封VXLAN流量的裝置。 |
| NVE |
網路虛擬化邊緣介面(介面nve1):進行封裝和解除封裝的邏輯介面。 |
| BGP EVPN |
在VTEP之間通告MAC、MAC/IP(路由型別2)、IP字首(路由型別5)和VTEP成員身份(路由型別3)的控制平面。 |
| AnyCast閘道 |
在每個枝葉上使用相同的SVI IP和MAC地址,並且預設網關始終是本地枝葉。 |
| BUM |
廣播、未知的單點傳播和多點傳播流量。 |
本文檔的先前版本使用了flood-and-learn,其中VTEP從資料平面泛洪中獲取遠端MAC地址。BGP EVPN用控制平面代替資料平面學習,是推薦的部署模式:
| 模式 |
組態 |
底層要求 |
| 多點傳送(用於本檔案) |
vni底下的mcast-group <group> |
所有底層鏈路和環回上的PIM稀疏模式,以及RP(主幹上的任播RP很常見) |
| 入口複製 |
vni下的輸入復寫通訊協定bgp |
僅單播。輸入VTEP會向BGP路由型別3為VNI學習的每個遠端VTEP傳送副本。 |

| 裝置 |
Loopback0(路由、BGP、PIM) |
Loopback1(NVE源) |
上行鏈路(Eth1/49至Spine-1,Eth1/50至Spine-2) |
| 骨幹–1 |
10.0.0.1 |
- |
Eth1/1-3到Leaf-1/2/3:10.1.1.0、.2、.4 /31 |
| 骨幹–2 |
10.0.0.2 |
- |
Eth1/1-3到Leaf-1/2/3:10.1.2.0、.2、.4 /31 |
| 枝葉–1 |
10.0.0.11 |
10.0.1.11,輔助10.0.1.112 |
10.1.1.1/31、10.1.2.1/31 |
| 枝葉–2 |
10.0.0.12 |
10.0.1.12,輔助10.0.1.112 |
10.1.1.3/31、10.1.2.3/31 |
| 枝葉–3 |
10.0.0.13 |
10.0.1.13 |
10.1.1.5/31、10.1.2.5/31 |
| 覆蓋對象 |
價值 |
| 任播RP |
10.254.254.1(兩條主幹上的環回254),組239.1.1.0/24 |
| VLAN 10/L2 VNI |
10010, mcast-group 239.1.1.10, gateway 192.168.10.1/24 |
| VLAN 20/L2 VNI |
10020, mcast-group 239.1.1.20, gateway 192.168.20.1/24 |
| VRF租戶 — A/L3 VNI |
50000(VLAN 500) |
| 任播網關MAC |
2020.0000.00aa |
| vPC備份底層SVI |
VLAN 3900、10.255.255.0/31(Leaf-1)和10.255.255.1/31(Leaf-2) |
附註:為NVE來源(Loopback1)、路由和BGP對等(Loopback0)使用單獨的環回。 在vPC VTEP上,NVE來源回送具有兩個對等點上相同的次要IP。遠端VTEP使用此共用地址(vPC任播VTEP)作為單個VTEP到達vPC對。
這些組態僅顯示與底層和VXLAN相關的部份。根據您的要求配置管理、AAA和其他功能。
nv overlay evpn
feature ospf
feature bgp
feature pim
feature nv overlay
ip pim rp-address 10.254.254.1 group-list 239.1.1.0/24
ip pim anycast-rp 10.254.254.1 10.0.0.1
ip pim anycast-rp 10.254.254.1 10.0.0.2
interface loopback0
description Routing / BGP / Anycast-RP member
ip address 10.0.0.1/32
ip router ospf UNDERLAY area 0.0.0.0
ip pim sparse-mode
interface loopback254
description Anycast-RP
ip address 10.254.254.1/32
ip router ospf UNDERLAY area 0.0.0.0
ip pim sparse-mode
interface Ethernet1/1
description to Leaf-1 Eth1/49
no switchport
mtu 9216
medium p2p
ip address 10.1.1.0/31
ip ospf network point-to-point
ip router ospf UNDERLAY area 0.0.0.0
ip pim sparse-mode
no shutdown
interface Ethernet1/2
description to Leaf-2 Eth1/49
no switchport
mtu 9216
medium p2p
ip address 10.1.1.2/31
ip ospf network point-to-point
ip router ospf UNDERLAY area 0.0.0.0
ip pim sparse-mode
no shutdown
interface Ethernet1/3
description to Leaf-3 Eth1/49
no switchport
mtu 9216
medium p2p
ip address 10.1.1.4/31
ip ospf network point-to-point
ip router ospf UNDERLAY area 0.0.0.0
ip pim sparse-mode
no shutdown
router ospf UNDERLAY
router-id 10.0.0.1
router bgp 65000
router-id 10.0.0.1
address-family l2vpn evpn
template peer VTEP
remote-as 65000
update-source loopback0
address-family l2vpn evpn
send-community
send-community extended
route-reflector-client
neighbor 10.0.0.11
inherit peer VTEP
neighbor 10.0.0.12
inherit peer VTEP
neighbor 10.0.0.13
inherit peer VTEP
interface loopback0
ip address 10.0.0.2/32
interface Ethernet1/1
ip address 10.1.2.0/31
interface Ethernet1/2
ip address 10.1.2.2/31
interface Ethernet1/3
ip address 10.1.2.4/31
router ospf UNDERLAY
router-id 10.0.0.2
router bgp 65000
router-id 10.0.0.2
nv overlay evpn
feature ospf
feature bgp
feature pim
feature fabric forwarding
feature interface-vlan
feature vn-segment-vlan-based
feature lacp
feature vpc
feature nv overlay
fabric forwarding anycast-gateway-mac 2020.0000.00aa
ip pim rp-address 10.254.254.1 group-list 239.1.1.0/24
vlan 10
vn-segment 10010
vlan 20
vn-segment 10020
vlan 500
name L3VNI-Tenant-A
vn-segment 50000
vlan 3900
name vPC-backup-underlay
system nve infra-vlans 3900
vrf context Tenant-A
vni 50000
rd auto
address-family ipv4 unicast
route-target both auto
route-target both auto evpn
vpc domain 10
peer-switch
role priority 10
peer-keepalive destination 172.16.0.2 source 172.16.0.1 vrf management
delay restore 150
peer-gateway
ip arp synchronize
ipv6 nd synchronize
interface port-channel1
description vPC peer-link
switchport
switchport mode trunk
switchport trunk allowed vlan 10,20,500,3900
spanning-tree port type network
vpc peer-link
interface port-channel11
description Server-1
switchport
switchport mode trunk
switchport trunk allowed vlan 10,20
spanning-tree port type edge trunk
mtu 9216
vpc 11
interface Vlan10
no shutdown
vrf member Tenant-A
no ip redirects
ip address 192.168.10.1/24
fabric forwarding mode anycast-gateway
interface Vlan20
no shutdown
vrf member Tenant-A
no ip redirects
ip address 192.168.20.1/24
fabric forwarding mode anycast-gateway
interface Vlan500
description L3VNI Tenant-A
no shutdown
vrf member Tenant-A
no ip redirects
ip forward
interface Vlan3900
description vPC backup underlay
no shutdown
mtu 9216
no ip redirects
ip address 10.255.255.0/31
ip ospf network point-to-point
ip router ospf UNDERLAY area 0.0.0.0
ip pim sparse-mode
interface nve1
no shutdown
host-reachability protocol bgp
advertise virtual-rmac
source-interface loopback1
member vni 10010
suppress-arp
mcast-group 239.1.1.10
member vni 10020
suppress-arp
mcast-group 239.1.1.20
member vni 50000 associate-vrf
interface Ethernet1/1
description Server-1
switchport
switchport mode trunk
switchport trunk allowed vlan 10,20
mtu 9216
channel-group 11 mode active
no shutdown
interface Ethernet1/53-54
description vPC peer-link to Leaf-2
switchport
switchport mode trunk
switchport trunk allowed vlan 10,20,500,3900
channel-group 1 mode active
no shutdown
interface Ethernet1/49
description to Spine-1 Eth1/1
no switchport
mtu 9216
medium p2p
ip address 10.1.1.1/31
ip ospf network point-to-point
ip router ospf UNDERLAY area 0.0.0.0
ip pim sparse-mode
no shutdown
interface Ethernet1/50
description to Spine-2 Eth1/1
no switchport
mtu 9216
medium p2p
ip address 10.1.2.1/31
ip ospf network point-to-point
ip router ospf UNDERLAY area 0.0.0.0
ip pim sparse-mode
no shutdown
interface loopback0
description Routing / BGP
ip address 10.0.0.11/32
ip router ospf UNDERLAY area 0.0.0.0
ip pim sparse-mode
interface loopback1
description NVE source
ip address 10.0.1.11/32
ip address 10.0.1.112/32 secondary
ip router ospf UNDERLAY area 0.0.0.0
ip pim sparse-mode
router ospf UNDERLAY
router-id 10.0.0.11
router bgp 65000
router-id 10.0.0.11
address-family l2vpn evpn
advertise-pip
template peer SPINE-RR
remote-as 65000
update-source loopback0
address-family l2vpn evpn
send-community
send-community extended
neighbor 10.0.0.1
inherit peer SPINE-RR
neighbor 10.0.0.2
inherit peer SPINE-RR
vrf Tenant-A
address-family ipv4 unicast
advertise l2vpn evpn
evpn
vni 10010 l2
rd auto
route-target import auto
route-target export auto
vni 10020 l2
rd auto
route-target import auto
route-target export auto
附註:在雲規模vPC VTEP上,備份底層SVI(VLAN 3900)必須列在system nve infra-vlan中。此VLAN必須在預設VRF中,不能具有vn網段,並且必須在對等鏈路上允許。當一個vPC對等體丟失其所有上行鏈路時,它通過孤立埠的對等鏈路傳輸VXLAN流量。請勿將ID相隔512的次要VLAN進行配置,例如10和522。
向vPC對等體通告-pip和通告虛擬rmac和,後者使用主IP(PIP)和自己的路由器MAC通告第5類(字首)路由和孤立主機路由。如果沒有這些功能,則僅有一個對等點後面向主機的流量可傳送到無法到達該對等點的對等點。
只有在VTEP是該VNI的分散式任播網關的VNI才支援ARP抑制(suppress-arp)。
vpc domain 10
role priority 20
peer-keepalive destination 172.16.0.1 source 172.16.0.2 vrf management
interface Vlan3900
ip address 10.255.255.1/31
interface Ethernet1/49
ip address 10.1.1.3/31
interface Ethernet1/50
ip address 10.1.2.3/31
interface loopback0
ip address 10.0.0.12/32
interface loopback1
ip address 10.0.1.12/32
ip address 10.0.1.112/32 secondary
router ospf UNDERLAY
router-id 10.0.0.12
router bgp 65000
router-id 10.0.0.12
注意:兩個vPC對等體上的NVE配置(VNI、mcast組、源介面、輔助IP)必須相同。不匹配是vPC型別1一致性故障,並且NVE介面或VNI已掛起。通過運行show vpc consistency-parameters global 命令進行檢查。
nv overlay evpn
feature ospf
feature bgp
feature pim
feature fabric forwarding
feature interface-vlan
feature vn-segment-vlan-based
feature nv overlay
fabric forwarding anycast-gateway-mac 2020.0000.00aa
ip pim rp-address 10.254.254.1 group-list 239.1.1.0/24
vlan 10
vn-segment 10010
vlan 20
vn-segment 10020
vlan 500
name L3VNI-Tenant-A
vn-segment 50000
vrf context Tenant-A
vni 50000
rd auto
address-family ipv4 unicast
route-target both auto
route-target both auto evpn
interface Vlan10
no shutdown
vrf member Tenant-A
no ip redirects
ip address 192.168.10.1/24
fabric forwarding mode anycast-gateway
interface Vlan20
no shutdown
vrf member Tenant-A
no ip redirects
ip address 192.168.20.1/24
fabric forwarding mode anycast-gateway
interface Vlan500
no shutdown
vrf member Tenant-A
no ip redirects
ip forward
interface nve1
no shutdown
host-reachability protocol bgp
source-interface loopback1
member vni 10010
suppress-arp
mcast-group 239.1.1.10
member vni 10020
suppress-arp
mcast-group 239.1.1.20
member vni 50000 associate-vrf
interface Ethernet1/1
description Server-2
switchport
switchport access vlan 10
spanning-tree port type edge
no shutdown
interface Ethernet1/2
description Server-3
switchport
switchport access vlan 20
spanning-tree port type edge
no shutdown
interface Ethernet1/49
description to Spine-1 Eth1/3
no switchport
mtu 9216
medium p2p
ip address 10.1.1.5/31
ip ospf network point-to-point
ip router ospf UNDERLAY area 0.0.0.0
ip pim sparse-mode
no shutdown
interface Ethernet1/50
description to Spine-2 Eth1/3
no switchport
mtu 9216
medium p2p
ip address 10.1.2.5/31
ip ospf network point-to-point
ip router ospf UNDERLAY area 0.0.0.0
ip pim sparse-mode
no shutdown
interface loopback0
ip address 10.0.0.13/32
ip router ospf UNDERLAY area 0.0.0.0
ip pim sparse-mode
interface loopback1
description NVE source
ip address 10.0.1.13/32
ip router ospf UNDERLAY area 0.0.0.0
ip pim sparse-mode
router ospf UNDERLAY
router-id 10.0.0.13
router bgp 65000
router-id 10.0.0.13
template peer SPINE-RR
remote-as 65000
update-source loopback0
address-family l2vpn evpn
send-community
send-community extended
neighbor 10.0.0.1
inherit peer SPINE-RR
neighbor 10.0.0.2
inherit peer SPINE-RR
vrf Tenant-A
address-family ipv4 unicast
advertise l2vpn evpn
evpn
vni 10010 l2
rd auto
route-target import auto
route-target export auto
vni 10020 l2
rd auto
route-target import auto
route-target export auto
如果底層未運行組播,請在每個VTEP上將mcast-group替換為基於BGP的輸入複製。第2層VNI不需要PIM和RP配置。
interface nve1
member vni 10010
suppress-arp
ingress-replication protocol bgp
member vni 10020
suppress-arp
ingress-replication protocol bgp
使用本節內容,確認您的組態是否正常運作。
Cisco CLI Analyzer(僅供已註冊客戶使用)支援某些 show 指令。使用Cisco CLI Analyzer檢視show指令輸出的分析。
| 區域 |
命令 |
| 底層 |
show ip ospf neighbors、show ip route 10.0.1.13、show ip pim neighbor、show ip pim rp |
| 重疊控制平面 |
show bgp l2vpn evpn summary,show bgp l2vpn evpn |
| NVE |
show nve interface nve1 detail、show nve peers、show nve vni |
| MAC/IP學習 |
show mac address-table vlan 10、show l2route evpn mac all、show l2route evpn mac-ip all、show ip arp suppression-cache detail |
| L3 VNI |
show ip route vrf Tenant-A, show bgp l2vpn evpn route-type 2, show bgp l2vpn evpn route-type 5 |
| 多點傳送複製 |
show ip mroute 239.1.1.10 |
| vPC |
show vpc, show vpc consistency-parameters global, show system nve infra-vlan |
這些輸出來自在Server-1、Server-2和Server-3之間傳送流量之後的穩定狀態。
Leaf-1# show ip pim rp
PIM RP Status Information for VRF "default"
BSR disabled
Auto-RP disabled
BSR RP Candidate policy: None
BSR RP policy: None
Auto-RP Announce policy: None
Auto-RP Discovery policy: None
Anycast-RP 10.254.254.1 members:
10.0.0.1 10.0.0.2
RP: 10.254.254.1, (0),
uptime: 1d01h priority: 255,
RP-source: (local),
group ranges:
239.1.1.0/24
Leaf-1# show bgp l2vpn evpn summary
BGP summary information for VRF default, address family L2VPN EVPN
BGP router identifier 10.0.0.11, local AS number 65000
BGP table version is 58, L2VPN EVPN config peers 2, capable peers 2
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd
10.0.0.1 4 65000 1520 1488 58 0 0 1d01h 9
10.0.0.2 4 65000 1519 1490 58 0 0 1d01h 9
Leaf-1# show nve interface nve1 detail
Interface: nve1, State: Up, encapsulation: VXLAN
VPC Capability: VPC-VIP-Only [notified]
Local Router MAC: 5254.0011.1b08
Host Learning Mode: Control-Plane
Source-Interface: loopback1 (primary: 10.0.1.11, secondary: 10.0.1.112)
Source Interface State: Up
Virtual RMAC Advertisement: Yes
NVE Flags:
Interface Handle: 0x49000001
Source Interface hold-down-time: 180
Source Interface hold-up-time: 30
Remaining hold-down time: 0 seconds
Virtual Router MAC: 0200.0a00.0170
Leaf-1# show nve peers
Interface Peer-IP State LearnType Uptime Router-Mac
--------- -------------------------------------- ----- --------- -------- -----------------
nve1 10.0.1.13 Up CP 1d01h 5254.0013.1b08
Leaf-1# show nve vni
Codes: CP - Control Plane DP - Data Plane
UC - Unconfigured SA - Suppress ARP
S-ND - Suppress ND
SU - Suppress Unknown Unicast
Xconn - Crossconnect
MS-IR - Multisite Ingress Replication
HYB - Hybrid IRB mode
Interface VNI Multicast-group State Mode Type [BD/VRF] Flags
--------- -------- ----------------- ----- ---- ------------------ -----
nve1 10010 239.1.1.10 Up CP L2 [10] SA
nve1 10020 239.1.1.20 Up CP L2 [20] SA
nve1 50000 n/a Up CP L3 [Tenant-A]
附註:透過BGP EVPN,當遠端VTEP通告在本地設定的VNI的路由時,會顯示NVE對等點(LearnType CP)。 Leaf-3將vPC對視為一個對等體,即AnyCast VTEP 10.0.1.112。通過advertise-pip,Leaf-3還將vPC主IP視為10.0.1.11和10.0.1.12,用於第5類路由和孤立路由。
Leaf-1# show l2route evpn mac all
Flags -(Rmac):Router MAC (Stt):Static (L):Local (R):Remote (V):vPC link
(Dup):Duplicate (Spl):Split (Rcv):Recv (AD):Auto-Delete (D):Del Pending
(S):Stale (C):Clear, (Ps):Peer Sync (O):Re-Originated (Nho):NH-Override
(Pf):Permanently-Frozen, (Orp): Orphan
Topology Mac Address Prod Flags Seq No Next-Hops
----------- -------------- ------ ------------- ---------- ----------------
10 0050.5601.0a0a Local L, 0 Po11
10 0050.5603.0a14 BGP SplRcv 0 10.0.1.13 (Label: 10010)
20 0050.5603.1e1e BGP SplRcv 0 10.0.1.13 (Label: 10020)
Leaf-1# show ip arp suppression-cache detail
Flags: + - Adjacencies synced via CFSoE
L - Local Adjacency
R - Remote Adjacency
L2 - Learnt over L2 interface
PS - Added via L2RIB, Peer Sync
RO - Dervied from L2RIB Peer Sync Entry
Ip Address Age Mac Address Vlan Physical-ifindex Flags Remote Vtep Addrs
192.168.10.10 00:02:11 0050.5601.0a0a 10 port-channel11 L
192.168.10.20 00:05:42 0050.5603.0a14 10 (null) R 10.0.1.13
Leaf-1# show ip route vrf Tenant-A 192.168.20.30
IP Route Table for VRF "Tenant-A"
'*' denotes best ucast next-hop
'**' denotes best mcast next-hop
'[x/y]' denotes [preference/metric]
'%' in via output denotes VRF
192.168.20.30/32, ubest/mbest: 1/0
*via 10.0.1.13%default, [200/0], 00:10:21, bgp-65000, internal, tag 65000, segid: 50000 tunnelid: 0xa00010d encap: VXLAN
Leaf-1# show vpc consistency-parameters global | include Nve|Src|Sec|Host
Nve1 Adm St, Src Adm St, 1 Up, Up, 10.0.1.112, CP, Up, Up, 10.0.1.112, CP,
Sec IP, Host Reach, VMAC TRUE, Disabled, TRUE, Disabled,
Adv, SA,mcast l2, mcast 0.0.0.0, 0.0.0.0, Disabled, 0.0.0.0, 0.0.0.0, Disabled,
Nve Vni Configuration 1 10010-10020 10010-10020
Leaf-1# show system nve infra-vlans
Currently active infra-vlans: 3900
所有VXLAN封包均源自輸入VTEP的NVE來源回送。對於vPC埠上的主機,這是共用輔助IP(10.0.1.112)。 已知的單點傳播流量到達遠端VTEP的NVE IP。BUM流量進入VNI的多播群組,或進行輸入複製,而單點傳播副本前往每個遠端VTEP。
| 標題 |
範例:Server-1到Server-2(VLAN 10,L2 VNI) |
範例:Server-1到Server-3(路由,L3 VNI) |
| 外部乙太網 |
枝葉–1上行鏈路MAC到主幹MAC |
枝葉–1上行鏈路MAC到主幹MAC |
| 外部IP |
10.0.1.112到10.0.1.13 |
10.0.1.112到10.0.1.13(如果流量來自孤立埠且使用advertise-pip,則為10.0.1.11到10.0.1.13) |
| 外部UDP |
源埠是內部流的雜湊(ECMP的熵);目的地連線埠4789 |
相同 |
| VXLAN |
標誌0x08(I標誌),VNI 10010 |
標誌0x08,VNI 50000 |
| 內部乙太網 |
Server-1 MAC到Server-2 MAC |
枝葉–1路由器MAC到枝葉–3路由器MAC |
| 內部IP |
192.168.10.10到192.168.10.20 |
192.168.10.10到192.168.20.30(TTL遞減) |
附註:VXLAN為原始幀增加了50個位元組。將底層MTU(所有主幹和枝葉上行鏈路以及vPC備份SVI)設定為比最大主機MTU至少多50位元組。建議使用9216。
| 症狀 |
支票 |
共同原因 |
| NVE對等體不在show nve peers中 |
show bgp l2vpn evpn summary、show ip route <remote NVE IP>、show nve vni |
BGP EVPN作業階段關閉;未在底層中通告的遠端NVE環回;兩個VTEP上未設定VNI;缺少send-community extended |
| NVE介面關閉或vPC VTEP上的VNI掛起 |
show nve interface nve1 detail, show vpc consistency-parameters global |
對等體之間的NVE配置不匹配;重新載入後,來源回送仍保留在抑制計時器中;輔助IP缺失或不同 |
| 同一VNI中的主機無法通訊,或ARP失敗 |
show l2route evpn mac all、show ip arp suppression-cache detail、show ip mroute <group> |
未收到RT-2(route-target或VNI不匹配);BUM未複製(NVE回送上無PIM鄰居、無RP、PIM遺失);suppress-arp on a VNI without an anycast gateway SVI |
| VNI之間的路由失敗 |
show ip route vrf Tenant-A, show nve vni(L3 VNI state), show bgp l2vpn evpn route-type 5 |
L3 VNI VLAN或SVI缺失或關閉;vrf上下文中缺少vni;通告BGP VRF下缺少的l2vpn evpn;route-target both auto evpn missing |
| 流量僅對孤立埠失敗,或者在一個vPC對等體失去其上行鏈路後失敗 |
show system nve infra-vlan, show ip ospf neighbors vrf default |
缺少備份底層SVI、不在系統命名的infra-vlan中、或在對等鏈路上不允許 |
| 大資料包被丟棄,小資料包工作 |
show interface <uplink>(TX錯誤),使用NVE環回之間設定的DF位元執行ping |
對於VXLAN開銷,底層MTU太小 |
附註:以下專案不支援作為VXLAN上行鏈路:
NVE源環回必須在預設VRF中。
| 修訂 | 發佈日期 | 意見 |
|---|---|---|
3.0 |
28-Oct-2026
|
已更新簡介、拼寫、語法、間距、插入的水平線以分隔各個部分的可讀性、固定CCW警報、URL和替代文字。 |
2.0 |
15-Nov-2022
|
已更新簡介錯誤、法律免責宣告、雜文、機器翻譯、SEO、樣式要求和格式。 |
1.0 |
10-Jul-2015
|
初始版本 |