為FlexVPN遠端使用者配置RADIUS屬性對映

已更新: 2024 年 2 月 6 日
文件 ID:221637

無偏見用語

本產品的文件集力求使用無偏見用語。針對本文件集的目的，無偏見係定義為未根據年齡、身心障礙、性別、種族身分、民族身分、性別傾向、社會經濟地位及交織性表示歧視的用語。由於本產品軟體使用者介面中硬式編碼的語言、根據 RFP 文件使用的語言，或引用第三方產品的語言，因此本文件中可能會出現例外狀況。深入瞭解思科如何使用包容性用語。

關於此翻譯

思科已使用電腦和人工技術翻譯本文件，讓全世界的使用者能夠以自己的語言理解支援內容。請注意，即使是最佳機器翻譯，也不如專業譯者翻譯的內容準確。Cisco Systems, Inc. 對這些翻譯的準確度概不負責，並建議一律查看原始英文文件（提供連結）。

    簡介

    本文檔介紹如何使用思科身份服務引擎(ISE)配置FlexVPN以驗證身份並執行屬性組對映。

    必要條件

    需求

    思科建議您瞭解以下主題：

    • 通過CLI在Cisco IOS® XE路由器上配置具有IKEV2/IPsec的遠端訪問虛擬私人網路(RAVPN)
    • 思科身份服務引擎(ISE)配置
    • 思科安全使用者端(CSC)
    • RADIUS通訊協定

    採用元件

    本檔案是根據以下軟體和硬體版本所編制：

    • Cisco CSR1000V(VXE) — 版本17.03.04a 
    • 思科身分識別服務引擎(ISE)- 3.1
    • 思科安全使用者端(CSC)- 5.0.05040版
    • Windows 11

    本文中的資訊是根據特定實驗室環境內的裝置所建立。文中使用到的所有裝置皆從已清除（預設）的組態來啟動。如果您的網路運作中，請確保您瞭解任何指令可能造成的影響。

    設定

    網路圖表

    Basic Network Diagram基本網路圖

    組態

    路由器配置

    步驟 1.在裝置上配置RADIUS伺服器以進行身份驗證和本地授權：

    aaa new-model
    aaa group server radius FlexVPN-Authentication-Server
    server-private 192.168.30.110 key Cisco123
    aaa authentication login FlexVPN-Authentication-List group FlexVPN-Authentication-Server
    aaa authorization network FlexVPN-Authorization-List local

    aaa authentication login <list_name> 命令是指身份驗證、授權和記帳(AAA)組（用於定義RADIUS伺服器）。

    aaa authorization network <list_name> local命令指明將使用本地定義的使用者/組。 

    步驟2. 配置信任點以儲存路由器證書。由於路由器的本地身份驗證型別為RSA，因此裝置要求伺服器使用證書對自身進行身份驗證：

    crypto pki trustpoint FlexVPN-TP
    enrollment url http://192.168.50.230:80
    subject-name CN=192.168.50.225
    revocation-check none
    rsakeypair FlexVPN_KEY

    步驟 3.為每個不同的使用者組定義IP本地池：

    ip local pool group1 172.16.10.1 172.16.10.50
    ip local pool group2 172.16.20.1 172.16.20.50

    步驟 4. 配置本地授權策略：

    crypto ikev2 authorization policy FlexVPN-Local-Policy

    授權策略不需要配置，因為身份驗證伺服器負責根據使用者所屬的組傳送相關值（DNS、池、受保護路由等）。但是，必須將其配置為在本地授權資料庫中定義使用者名稱。

    第5步（可選）。建立IKEv2建議和策略（如果未配置，則使用智慧預設值）：

    crypto ikev2 proposal IKEv2-prop
     encryption aes-cbc-256
     integrity sha256
     group 14

    crypto ikev2 policy IKEv2-pol
     proposal IKEv2-prop

    第6步（可選）。配置轉換集（如果未配置，則使用智慧預設值）：

    crypto ipsec transform-set TS esp-aes 256 esp-sha256-hmac
     mode tunnel

    步驟 7. 使用正確的本地和遠端身份、身份驗證方法（本地和遠端）、信任點、AAA和用於連線的虛擬模板介面配置IKEv2配置檔案：

    crypto ikev2 profile FlexVPN-IKEv2-Profile
    match identity remote key-id cisco.example
    identity local dn 
    authentication local rsa-sig
    authentication remote eap query-identity
    pki trustpoint FlexVPN-TP
    aaa authentication eap FlexVPN-Authentication-List
    aaa authorization group eap list FlexVPN-Authorization-List FlexVPN-Local-Policy
    aaa authorization user eap cached
    virtual-template 100

    命令aaa authorization user eap cached指定必須快取EAP身份驗證期間接收的屬性。 此命令對於配置至關重要，因為如果沒有此命令，則不使用身份驗證伺服器傳送的資料，從而導致連線失敗。

    note-icon

    註：遠端金鑰ID必須與XML檔案中的金鑰ID值匹配。如果未在XML檔案中進行修改，則使用預設值(*$AnyConnectClient$*)，並且必須在IKEv2配置檔案中進行配置。

    步驟 8. 配置IPsec配置檔案並分配轉換集和IKEv2配置檔案：

    crypto ipsec profile FlexVPN-IPsec-Profile
    set transform-set TS 
    set ikev2-profile FlexVPN-IKEv2-Profile

    步驟 9. 配置環回介面。虛擬訪問介面從它借用IP地址：

    interface Loopback100
    ip address 10.0.0.1 255.255.255.255

    步驟 10. 建立將用於建立不同虛擬訪問介面的虛擬模板，並連結在第8步中建立的IPSec配置檔案： 

    interface Virtual-Template100 type tunnel
    ip unnumbered Loopback100
    tunnel mode ipsec ipv4
    tunnel protection ipsec profile FlexVPN-IPsec-Profile-1

    步驟 11.在路由器上禁用基於HTTP-URL的證書查詢和HTTP伺服器：

    no crypto ikev2 http-url cert
    no ip http server
    no ip http secure-server

    身分識別服務引擎(ISE)配置

    步驟 1.登入到ISE伺服器並導航到Administration > Network Resources > Network Devices:

    ISE General MenuISE常規選單

    步驟 2.按一下 新增 將路由器配置為AAA客戶端：

    Adding a New Network Device新增新網路裝置

    輸入網路裝置 名稱 和 IP 位址 欄位，然後檢查 RADIUS身份驗證設定 框並新增Shared Secret，該值必須相同 建立路由器上的RADIUS伺服器對象時使用的。

    Name and IP Address名稱和IP地址     

    Radius PasswordRadius密碼

    按一下「Save」。

    步驟 3.導航到Administration > Identity Management > Groups: 

    ISE General MenuISE常規選單

    步驟 4.按一下User Identity Groups，然後按一下Add:

    Add a New Group新增新組

    輸入組名稱，然後按一下提交。

    Group Information組資訊

    note-icon

    注意：重複步驟3和4，根據需要建立多個組。

    步驟 5. 導航到管理>身份管理>身份:

    ISE General MenuISE常規選單

    步驟 6.按一下Add以在伺服器本地資料庫中建立新使用者： 

    Add a User新增使用者

    輸入Username和Login Password。然後，導航到此頁末尾，然後選擇User Group:

    Username and Password使用者名稱和密碼      

    Assign the Correct Group to the User將正確的組分配給使用者

    按一下「Save」。

    note-icon

    注意：重複步驟5和6，建立所需的使用者並將其分配給相應的組。

    步驟7.導覽至Policy > Policy Sets:

    ISE General MenuISE常規選單

    按一下箭頭選擇預設授權策略在螢幕右側： 

    Select the Authorization Policy選擇授權策略

    步驟 8. 按一下Authorization Policy旁邊的下拉選單箭頭將其展開。然後，按一下add(+)圖示以新增新規則： 

    Add a New Authorization Rule新增新授權規則

    輸入規則的名稱並選擇Conditions列下的add(+)圖示： 

    Add a Condition新增條件

    步驟 9. 在「屬性編輯器」(Attribute Editor)文本框中按一下，然後按一下「身份」(Identity)組。選擇Identity group - Name屬性：

    Select the Condition選擇條件

    選擇等於作為運算子，按一下下拉選單箭頭以顯示可用選項，然後選擇User Identity Groups:<GROUP_NAME>。

    Select the Group選擇組

    按一下儲存。

    步驟10.在Profiles列中，按一下add(+)圖示並選擇Create a New Authorization Profile:

    Create the Authorization Profile建立授權配置檔案

    輸入配置檔案 名稱

    Profile Information配置檔案資訊

          

    導航到此頁末尾的「Advanced Attribute Settings」（高級屬性設定），然後按一下下拉選單箭頭。然後按一下Cisco，然後選擇cisco-av-pair—[1]:

    Select the Attribute Type選擇屬性型別.   

    新增要配置的cisco-av-pair屬性，然後按一下add(+)圖示新增其他屬性：

    Configure the Attribute配置屬性

    note-icon

    注意：有關屬性規範（名稱、語法、說明、示例等），請參閱FlexVPN RADIUS屬性配置指南：

    FlexVPN和網際網路金鑰交換版本2配置指南，Cisco IOS XE Fuji 16.9.x — 支援的RADIUS屬性

    note-icon

    注意：重複上一步以建立必要的屬性。

    按一下「Save」。

    後面的屬性分配給每個組：

    • 組1屬性：

    Group1 AttributeGroup1屬性

    • 組2屬性： 

    Group2 Attributes組2屬性

    步驟11.點選下拉選單箭頭並選擇在步驟10上建立的授權配置檔案：

    Assign Authorization Profile分配授權配置檔案

    按一下「Save」。

    note-icon

    注意：重複步驟8至11，為每個組建立必要的授權規則。

    第12步（可選）。 如果需要編輯授權配置檔案，請導航到Policy > Results:

    ISE General MenuISE常規選單

    導覽至Authorization > Authorization Profiles。按一下要修改的配置檔案的覈取方塊，然後按一下Edit: 

    Edit the Authorization Profile編輯授權配置檔案

    客戶端配置

    步驟 1.使用XML配置檔案編輯器建立XML配置檔案。以下範例是用來建立此檔案的範例： 


    <AnyConnectProfile xmlns="http://schemas.xmlsoap.org/encoding/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://schemas.xmlsoap.org/encoding/ AnyConnectProfile.xsd">
    <ClientInitialization>
    <UseStartBeforeLogon UserControllable="true">true</UseStartBeforeLogon>
    <AutomaticCertSelection UserControllable="false">true</AutomaticCertSelection>
    <ShowPreConnectMessage>false</ShowPreConnectMessage>
    <CertificateStore>All</CertificateStore>
    <CertificateStoreMac>All</CertificateStoreMac>
    <CertificateStoreLinux>All</CertificateStoreLinux>
    <CertificateStoreOverride>true</CertificateStoreOverride>
    <ProxySettings>Native</ProxySettings>
    <AllowLocalProxyConnections>true</AllowLocalProxyConnections>
    <AuthenticationTimeout>30</AuthenticationTimeout>
    <AutoConnectOnStart UserControllable="true">false</AutoConnectOnStart>
    <MinimizeOnConnect UserControllable="true">true</MinimizeOnConnect>
    <LocalLanAccess UserControllable="true">false</LocalLanAccess>
    <DisableCaptivePortalDetection UserControllable="true">false</DisableCaptivePortalDetection>
    <ClearSmartcardPin UserControllable="false">true</ClearSmartcardPin>
    <IPProtocolSupport>IPv4,IPv6</IPProtocolSupport>
    <AutoReconnect UserControllable="false">
    true
    <AutoReconnectBehavior UserControllable="false">ReconnectAfterResume</AutoReconnectBehavior>
    </AutoReconnect>
    <SuspendOnConnectedStandby>false</SuspendOnConnectedStandby>
    <AutoUpdate UserControllable="false">true</AutoUpdate>
    <RSASecurIDIntegration UserControllable="false">Automatic</RSASecurIDIntegration>
    <WindowsLogonEnforcement>SingleLocalLogon</WindowsLogonEnforcement>
    <LinuxLogonEnforcement>SingleLocalLogon</LinuxLogonEnforcement>
    <WindowsVPNEstablishment>AllowRemoteUsers</WindowsVPNEstablishment>
    <LinuxVPNEstablishment>LocalUsersOnly</LinuxVPNEstablishment>
    <AutomaticVPNPolicy>false</AutomaticVPNPolicy>
    <PPPExclusion UserControllable="false">
    Disable
    <PPPExclusionServerIP UserControllable="false"/>
    </PPPExclusion>
    <EnableScripting UserControllable="false">false</EnableScripting>
    <EnableAutomaticServerSelection UserControllable="false">
    false
    <AutoServerSelectionImprovement>20</AutoServerSelectionImprovement>
    <AutoServerSelectionSuspendTime>4</AutoServerSelectionSuspendTime>
    </EnableAutomaticServerSelection>
    <RetainVpnOnLogoff>false </RetainVpnOnLogoff>
    <CaptivePortalRemediationBrowserFailover>false</CaptivePortalRemediationBrowserFailover>
    <AllowManualHostInput>true</AllowManualHostInput>
    </ClientInitialization>
    <ServerList>
    <HostEntry>
    <HostName>FlexVPN HUB</HostName>
    <HostAddress>192.168.50.225</HostAddress>
    <PrimaryProtocol>
    IPsec
    <StandardAuthenticationOnly>
    true
    <AuthMethodDuringIKENegotiation>EAP-MD5</AuthMethodDuringIKENegotiation>
    <IKEIdentity>cisco.example</IKEIdentity>
    </StandardAuthenticationOnly>
    </PrimaryProtocol>
    </HostEntry>
    </ServerList>
    </AnyConnectProfile>

    • <HostName> — 用於引用主機、IP地址或完全限定域名(FQDN)的別名。這顯示在CSC框中。
    • <HostAddress> - FlexVPN中心的IP地址或FQDN。
    • <PrimaryProtocol> — 必須設定為IPsec才能強制客戶端使用IKEv2/IPsec而不是SSL。
    • <AuthMethodDuringIKENegotiation> — 必須設定為在EAP中使用EAP-MD5。這是針對ISE伺服器進行身份驗證所必需的。
    • <IKEIdenty> — 此字串由客戶端作為ID_GROUP型別ID負載傳送。這可用於將客戶端與集線器上的特定IKEv2配置檔案進行匹配。

    驗證

    步驟 1.導航到安裝CSC的客戶端電腦。連線到FlexVPN中心並輸入user1憑據：

    User1 CredentialsUser1憑據

    步驟 2.建立連線後，按一下齒輪圖示（左下角）並導航至AnyConnectVPN > Statistics。 在Address Information部分中確認所分配的IP地址屬於為group1配置的池：

    User1 StatisticsUser1統計資訊

    導覽至AnyConnectVPN > Route details，並確認顯示的資訊與為group1配置的安全路由和DNS相對應：

    User1 Route Details使用者1路由詳細資訊

    步驟 3.對user2憑據重複步驟1和2，檢查資訊是否與在ISE授權策略上為此組配置的值匹配: 

    User2 Credentials使用者2身份證明

    User2 Statistics使用者2統計資訊

    User2 Route Details使用者2路由詳細資訊

    疑難排解

    調試和日誌

    在Cisco路由器上:

    1.  使用IKEv2和IPSec調試驗證頭端和客戶端之間的協商：

      debug crypto ikev2
      debug crypto ikev2 packet
      debug crypto ikev2 error
      debug crypto ikev2 internal
      debug crypto ipsec 
      debug crypto ipsec error
    2.  使用AAA調試驗證本地和/或遠端屬性的分配：

      debug aaa authorization
      debug aaa authentication
      debug radius authentication

    在ISE上：

    • RADIUS即時日誌

    工作場景

    接下來的輸出是成功連線的示例：

    • User1調試輸出：

    Jan 30 02:57:21.088: AAA/BIND(000000FF): Bind i/f 
    Jan 30 02:57:21.088: AAA/AUTHEN/LOGIN (000000FF): Pick method list 'FlexVPN-Authentication-List' 
    Jan 30 02:57:21.088: RADIUS/ENCODE(000000FF):Orig. component type = VPN IPSEC
    Jan 30 02:57:21.088: RADIUS/ENCODE(000000FF): dropping service type, "radius-server attribute 6 on-for-login-auth" is off
    Jan 30 02:57:21.088: RADIUS(000000FF): Config NAS IP: 0.0.0.0
    Jan 30 02:57:21.088: vrfid: [65535] ipv6 tableid : [0]
    Jan 30 02:57:21.088: idb is NULL
    Jan 30 02:57:21.088: RADIUS(000000FF): Config NAS IPv6: ::
    Jan 30 02:57:21.089: RADIUS/ENCODE(000000FF): acct_session_id: 4245
    Jan 30 02:57:21.089: RADIUS(000000FF): sending
    Jan 30 02:57:21.089: RADIUS/ENCODE: Best Local IP-Address 192.168.30.100 for Radius-Server 192.168.30.110
    Jan 30 02:57:21.089: RADIUS: Message Authenticator encoded
    Jan 30 02:57:21.089: RADIUS(000000FF): Send Access-Request to 192.168.30.110:1645 id 1645/85, len 229
    RADIUS: authenticator C9 82 15 29 AF 4B 17 61 - 27 F4 5C 27 C2 C3 50 34
    Jan 30 02:57:21.089: RADIUS: Service-Type [6] 6 Login [1]
    Jan 30 02:57:21.089: RADIUS: Vendor, Cisco [26] 26 
    Jan 30 02:57:21.089: RADIUS: Cisco AVpair [1] 20 "service-type=Login"
    Jan 30 02:57:21.089: RADIUS: Vendor, Cisco [26] 36 
    Jan 30 02:57:21.089: RADIUS: Cisco AVpair [1] 30 "isakmp-phase1-id=cisco.example"
    Jan 30 02:57:21.089: RADIUS: Calling-Station-Id [31] 13 "192.168.50.130"
    Jan 30 02:57:21.089: RADIUS: Vendor, Cisco [26] 64 
    Jan 30 02:57:21.089: RADIUS: Cisco AVpair [1] 58 "audit-session-id=L2L42F2F0116ZO2L42F2F016FZH1194CAE2ZN1F"
    Jan 30 02:57:21.089: RADIUS: User-Name [1] 7 "user1"
    Jan 30 02:57:21.089: RADIUS: Vendor, Cisco [26] 21 
    Jan 30 02:57:21.089: RADIUS: Cisco AVpair [1] 15 "coa-push=true"
    Jan 30 02:57:21.089: RADIUS: EAP-Message [79] 12 
    RADIUS: 02 3B 00 0A 01 75 73 65 72 31 [ ;user1]
    Jan 30 02:57:21.089: RADIUS: Message-Authenticato[80] 18 
    RADIUS: E7 22 65 E0 DC 03 3A 49 0B 01 49 2A D5 3F AD 4F [ "e:II*?O]
    Jan 30 02:57:21.089: RADIUS: NAS-IP-Address [4] 6 192.168.30.100 
    Jan 30 02:57:21.089: RADIUS(000000FF): Sending a IPv4 Radius Packet
    Jan 30 02:57:21.090: RADIUS(000000FF): Started 5 sec timeout
    Jan 30 02:57:21.094: RADIUS: Received from id 1645/85 192.168.30.110:1645, Access-Challenge, len 137
    RADIUS: authenticator 67 2B 9D 9C 4D 1F F3 E8 - F6 EC 9B EB 8E 49 C8 A5
    Jan 30 02:57:21.094: RADIUS: State [24] 91 
    RADIUS: 35 32 43 50 4D 53 65 73 73 69 6F 6E 49 44 3D 4C [52CPMSessionID=L]
    RADIUS: 32 4C 34 32 46 32 46 30 31 31 36 5A 4F 32 4C 34 [2L42F2F0116ZO2L4]
    RADIUS: 32 46 32 46 30 31 36 46 5A 48 31 31 39 34 43 41 [2F2F016FZH1194CA]
    RADIUS: 45 32 5A 4E 31 46 3B 33 31 53 65 73 73 69 6F 6E [E2ZN1F;31Session]
    RADIUS: 49 44 3D 49 53 45 2D 44 49 41 4E 2F 34 39 33 30 [ID=ISE-SERVER/4930]
    RADIUS: 38 30 30 31 38 2F 32 39 3B [ 80018/29;]
    Jan 30 02:57:21.094: RADIUS: EAP-Message [79] 8 
    RADIUS: 01 52 00 06 0D 20 [ R ]
    Jan 30 02:57:21.094: RADIUS: Message-Authenticato[80] 18 
    RADIUS: 38 8A B1 31 72 62 06 40 4F D4 58 48 E8 36 E7 80 [ 81rb@OXH6]
    Jan 30 02:57:21.094: RADIUS(000000FF): Received from id 1645/85
    RADIUS/DECODE: EAP-Message fragments, 6, total 6 bytes
    Jan 30 02:57:21.097: AAA/AUTHEN/LOGIN (000000FF): Pick method list 'FlexVPN-Authentication-List' 
    Jan 30 02:57:21.097: RADIUS/ENCODE(000000FF):Orig. component type = VPN IPSEC
    Jan 30 02:57:21.097: RADIUS/ENCODE(000000FF): dropping service type, "radius-server attribute 6 on-for-login-auth" is off
    Jan 30 02:57:21.097: RADIUS(000000FF): Config NAS IP: 0.0.0.0
    Jan 30 02:57:21.097: vrfid: [65535] ipv6 tableid : [0]
    Jan 30 02:57:21.097: idb is NULL
    Jan 30 02:57:21.097: RADIUS(000000FF): Config NAS IPv6: ::
    Jan 30 02:57:21.097: RADIUS/ENCODE(000000FF): acct_session_id: 4245
    Jan 30 02:57:21.097: RADIUS(000000FF): sending
    Jan 30 02:57:21.097: RADIUS/ENCODE: Best Local IP-Address 192.168.30.100 for Radius-Server 192.168.30.110
    Jan 30 02:57:21.097: RADIUS: Message Authenticator encoded
    Jan 30 02:57:21.097: RADIUS(000000FF): Send Access-Request to 192.168.30.110:1645 id 1645/86, len 316
    RADIUS: authenticator 93 07 42 CC D1 90 31 68 - 56 D0 D0 5A 35 C3 67 BC
    Jan 30 02:57:21.097: RADIUS: Service-Type [6] 6 Login [1]
    Jan 30 02:57:21.097: RADIUS: Vendor, Cisco [26] 26 
    Jan 30 02:57:21.098: RADIUS: Cisco AVpair [1] 20 "service-type=Login"
    Jan 30 02:57:21.098: RADIUS: Vendor, Cisco [26] 36 
    Jan 30 02:57:21.098: RADIUS: Cisco AVpair [1] 30 "isakmp-phase1-id=cisco.example"
    Jan 30 02:57:21.098: RADIUS: Calling-Station-Id [31] 13 "192.168.50.130"
    Jan 30 02:57:21.098: RADIUS: Vendor, Cisco [26] 64 
    Jan 30 02:57:21.098: RADIUS: Cisco AVpair [1] 58 "audit-session-id=L2L42F2F0116ZO2L42F2F016FZH1194CAE2ZN1F"
    Jan 30 02:57:21.098: RADIUS: User-Name [1] 7 "user1"
    Jan 30 02:57:21.098: RADIUS: Vendor, Cisco [26] 21 
    Jan 30 02:57:21.098: RADIUS: Cisco AVpair [1] 15 "coa-push=true"
    Jan 30 02:57:21.098: RADIUS: EAP-Message [79] 8 
    RADIUS: 02 52 00 06 03 04 [ R]
    Jan 30 02:57:21.098: RADIUS: Message-Authenticato[80] 18 
    RADIUS: E0 67 24 D3 BB CF D9 E0 EE 44 98 8A 26 64 AC C9 [ g$D&d]
    Jan 30 02:57:21.098: RADIUS: State [24] 91 
    RADIUS: 35 32 43 50 4D 53 65 73 73 69 6F 6E 49 44 3D 4C [52CPMSessionID=L]
    RADIUS: 32 4C 34 32 46 32 46 30 31 31 36 5A 4F 32 4C 34 [2L42F2F0116ZO2L4]
    RADIUS: 32 46 32 46 30 31 36 46 5A 48 31 31 39 34 43 41 [2F2F016FZH1194CA]
    RADIUS: 45 32 5A 4E 31 46 3B 33 31 53 65 73 73 69 6F 6E [E2ZN1F;31Session]
    RADIUS: 49 44 3D 49 53 45 2D 44 49 41 4E 2F 34 39 33 30 [ID=ISE-SERVER/4930]
    RADIUS: 38 30 30 31 38 2F 32 39 3B [ 80018/29;]
    Jan 30 02:57:21.098: RADIUS: NAS-IP-Address [4] 6 192.168.30.100 
    Jan 30 02:57:21.098: RADIUS(000000FF): Sending a IPv4 Radius Packet
    Jan 30 02:57:21.099: RADIUS(000000FF): Started 5 sec timeout
    Jan 30 02:57:21.101: RADIUS: Received from id 1645/86 192.168.30.110:1645, Access-Challenge, len 161
    RADIUS: authenticator 42 A3 5F E0 92 13 51 13 - B2 80 56 A3 91 36 BD A1
    Jan 30 02:57:21.101: RADIUS: State [24] 91 
    RADIUS: 35 32 43 50 4D 53 65 73 73 69 6F 6E 49 44 3D 4C [52CPMSessionID=L]
    RADIUS: 32 4C 34 32 46 32 46 30 31 31 36 5A 4F 32 4C 34 [2L42F2F0116ZO2L4]
    RADIUS: 32 46 32 46 30 31 36 46 5A 48 31 31 39 34 43 41 [2F2F016FZH1194CA]
    RADIUS: 45 32 5A 4E 31 46 3B 33 31 53 65 73 73 69 6F 6E [E2ZN1F;31Session]
    RADIUS: 49 44 3D 49 53 45 2D 44 49 41 4E 2F 34 39 33 30 [ID=ISE-SERVER/4930]
    RADIUS: 38 30 30 31 38 2F 32 39 3B [ 80018/29;]
    Jan 30 02:57:21.101: RADIUS: EAP-Message [79] 32 
    RADIUS: 01 53 00 1E 04 10 D7 61 AE 69 3B 88 A1 83 E4 EC 0F B6 EF 68 58 16 49 53 45 2D 44 49 41 4E [ Sai;hXISE-SERVER]
    Jan 30 02:57:21.101: RADIUS: Message-Authenticato[80] 18 
    RADIUS: 3E C9 C1 E1 F2 3B 4E 4C DF CF AC 21 AA E9 C3 F0 [ >;NL!]
    Jan 30 02:57:21.101: RADIUS(000000FF): Received from id 1645/86
    RADIUS/DECODE: EAP-Message fragments, 30, total 30 bytes
    Jan 30 02:57:21.103: AAA/AUTHEN/LOGIN (000000FF): Pick method list 'FlexVPN-Authentication-List' 
    Jan 30 02:57:21.103: RADIUS/ENCODE(000000FF):Orig. component type = VPN IPSEC
    Jan 30 02:57:21.103: RADIUS/ENCODE(000000FF): dropping service type, "radius-server attribute 6 on-for-login-auth" is off
    Jan 30 02:57:21.103: RADIUS(000000FF): Config NAS IP: 0.0.0.0
    Jan 30 02:57:21.103: vrfid: [65535] ipv6 tableid : [0]
    Jan 30 02:57:21.104: idb is NULL
    Jan 30 02:57:21.104: RADIUS(000000FF): Config NAS IPv6: ::
    Jan 30 02:57:21.104: RADIUS/ENCODE(000000FF): acct_session_id: 4245
    Jan 30 02:57:21.104: RADIUS(000000FF): sending
    Jan 30 02:57:21.104: RADIUS/ENCODE: Best Local IP-Address 192.168.30.100 for Radius-Server 192.168.30.110
    Jan 30 02:57:21.104: RADIUS: Message Authenticator encoded
    Jan 30 02:57:21.104: RADIUS(000000FF): Send Access-Request to 192.168.30.110:1645 id 1645/87, len 332
    RADIUS: authenticator 89 35 9C C5 06 FB 04 B7 - 4E A3 B2 5F 2B 15 4F 46
    Jan 30 02:57:21.104: RADIUS: Service-Type [6] 6 Login [1]
    Jan 30 02:57:21.104: RADIUS: Vendor, Cisco [26] 26 
    Jan 30 02:57:21.104: RADIUS: Cisco AVpair [1] 20 "service-type=Login"
    Jan 30 02:57:21.104: RADIUS: Vendor, Cisco [26] 36 
    Jan 30 02:57:21.104: RADIUS: Cisco AVpair [1] 30 "isakmp-phase1-id=cisco.example"
    Jan 30 02:57:21.104: RADIUS: Calling-Station-Id [31] 13 "192.168.50.130"
    Jan 30 02:57:21.104: RADIUS: Vendor, Cisco [26] 64 
    Jan 30 02:57:21.104: RADIUS: Cisco AVpair [1] 58 "audit-session-id=L2L42F2F0116ZO2L42F2F016FZH1194CAE2ZN1F"
    Jan 30 02:57:21.104: RADIUS: User-Name [1] 7 "user1"
    Jan 30 02:57:21.104: RADIUS: Vendor, Cisco [26] 21 
    Jan 30 02:57:21.104: RADIUS: Cisco AVpair [1] 15 "coa-push=true"
    Jan 30 02:57:21.104: RADIUS: EAP-Message [79] 24 
    RADIUS: 02 53 00 16 04 10 B0 BB 3E D5 B1 D6 01 FC 9A B7 4A DB AB F7 2F B6 [ S>J/]
    Jan 30 02:57:21.104: RADIUS: Message-Authenticato[80] 18 
    RADIUS: 79 43 97 A7 26 17 3E 3B 54 B4 90 D4 76 0F E0 14 [ yC&>;Tv]
    Jan 30 02:57:21.104: RADIUS: State [24] 91 
    RADIUS: 35 32 43 50 4D 53 65 73 73 69 6F 6E 49 44 3D 4C [52CPMSessionID=L]
    RADIUS: 32 4C 34 32 46 32 46 30 31 31 36 5A 4F 32 4C 34 [2L42F2F0116ZO2L4]
    RADIUS: 32 46 32 46 30 31 36 46 5A 48 31 31 39 34 43 41 [2F2F016FZH1194CA]
    RADIUS: 45 32 5A 4E 31 46 3B 33 31 53 65 73 73 69 6F 6E [E2ZN1F;31Session]
    RADIUS: 49 44 3D 49 53 45 2D 44 49 41 4E 2F 34 39 33 30 [ID=ISE-SERVER/4930]
    RADIUS: 38 30 30 31 38 2F 32 39 3B [ 80018/29;]
    Jan 30 02:57:21.104: RADIUS: NAS-IP-Address [4] 6 192.168.30.100 
    Jan 30 02:57:21.105: RADIUS(000000FF): Sending a IPv4 Radius Packet
    Jan 30 02:57:21.105: RADIUS(000000FF): Started 5 sec timeout
    Jan 30 02:57:21.170: RADIUS: Received from id 1645/87 192.168.30.110:1645, Access-Accept, len 233
    RADIUS: authenticator 75 F6 05 85 1D A0 C3 EE - F8 81 F9 02 38 AC C1 B6
    Jan 30 02:57:21.170: RADIUS: User-Name [1] 7 "user1"
    Jan 30 02:57:21.170: RADIUS: Class [25] 68 
    RADIUS: 43 41 43 53 3A 4C 32 4C 34 32 46 32 46 30 31 31 [CACS:L2L42F2F011]
    RADIUS: 36 5A 4F 32 4C 34 32 46 32 46 30 31 36 46 5A 48 [6ZO2L42F2F016FZH]
    RADIUS: 31 31 39 34 43 41 45 32 5A 4E 31 46 3A 49 53 45 [1194CAE2ZN1F:ISE]
    RADIUS: 2D 44 49 41 4E 2F 34 39 33 30 38 30 30 31 38 2F [-DIAN/493080018/]
    RADIUS: 32 39 [ 29]
    Jan 30 02:57:21.170: RADIUS: EAP-Message [79] 6 
    RADIUS: 03 53 00 04 [ S]
    Jan 30 02:57:21.170: RADIUS: Message-Authenticato[80] 18 
    RADIUS: 8A A9 CC 07 61 A2 6D BA E4 EB B5 B7 73 0E EC 28 [ ams(]
    Jan 30 02:57:21.170: RADIUS: Vendor, Cisco [26] 37 
    Jan 30 02:57:21.170: RADIUS: Cisco AVpair [1] 31 "ipsec:dns-servers=10.0.50.101"
    Jan 30 02:57:21.170: RADIUS: Vendor, Cisco [26] 47 
    Jan 30 02:57:21.170: RADIUS: Cisco AVpair [1] 41 "ipsec:route-set=prefix 192.168.100.0/24"
    Jan 30 02:57:21.170: RADIUS: Vendor, Cisco [26] 30 
    Jan 30 02:57:21.170: RADIUS: Cisco AVpair [1] 24 "ipsec:addr-pool=group1"
    Jan 30 02:57:21.171: RADIUS(000000FF): Received from id 1645/87
    RADIUS/DECODE: EAP-Message fragments, 4, total 4 bytes
    Jan 30 02:57:21.175: AAA/BIND(00000100): Bind i/f 
    Jan 30 02:57:21.175: AAA/AUTHOR (0x100): Pick method list 'FlexVPN-Authorization-List'
    Jan 30 02:57:21.176: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access1, changed state to down
    Jan 30 02:57:21.192: %SYS-5-CONFIG_P: Configured programmatically by process Crypto INT from console as console
    Jan 30 02:57:21.376: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access1, changed state to up
    • 使用者2調試輸出：
    Jan 30 03:28:58.102: AAA/BIND(00000103): Bind i/f 
    Jan 30 03:28:58.102: AAA/AUTHEN/LOGIN (00000103): Pick method list 'FlexVPN-Authentication-List' 
    Jan 30 03:28:58.103: RADIUS/ENCODE(00000103):Orig. component type = VPN IPSEC
    Jan 30 03:28:58.103: RADIUS/ENCODE(00000103): dropping service type, "radius-server attribute 6 on-for-login-auth" is off
    Jan 30 03:28:58.103: RADIUS(00000103): Config NAS IP: 0.0.0.0
    Jan 30 03:28:58.103: vrfid: [65535] ipv6 tableid : [0]
    Jan 30 03:28:58.103: idb is NULL
    Jan 30 03:28:58.103: RADIUS(00000103): Config NAS IPv6: ::
    Jan 30 03:28:58.103: RADIUS/ENCODE(00000103): acct_session_id: 4249
    Jan 30 03:28:58.103: RADIUS(00000103): sending
    Jan 30 03:28:58.103: RADIUS/ENCODE: Best Local IP-Address 192.168.30.100 for Radius-Server 192.168.30.110
    Jan 30 03:28:58.103: RADIUS: Message Authenticator encoded
    Jan 30 03:28:58.103: RADIUS(00000103): Send Access-Request to 192.168.30.110:1645 id 1645/88, len 229
    RADIUS: authenticator 71 99 09 63 19 F7 D7 0B - 1D A9 4E 64 28 6F A5 64
    Jan 30 03:28:58.103: RADIUS: Service-Type [6] 6 Login [1]
    Jan 30 03:28:58.103: RADIUS: Vendor, Cisco [26] 26 
    Jan 30 03:28:58.103: RADIUS: Cisco AVpair [1] 20 "service-type=Login"
    Jan 30 03:28:58.103: RADIUS: Vendor, Cisco [26] 36 
    Jan 30 03:28:58.104: RADIUS: Cisco AVpair [1] 30 "isakmp-phase1-id=cisco.example"
    Jan 30 03:28:58.104: RADIUS: Calling-Station-Id [31] 13 "192.168.50.130"
    Jan 30 03:28:58.104: RADIUS: Vendor, Cisco [26] 64 
    Jan 30 03:28:58.104: RADIUS: Cisco AVpair [1] 58 "audit-session-id=L2L42F2F0116ZO2L42F2F016FZH1194E444ZN20"
    Jan 30 03:28:58.104: RADIUS: User-Name [1] 7 "user2"
    Jan 30 03:28:58.104: RADIUS: Vendor, Cisco [26] 21 
    Jan 30 03:28:58.104: RADIUS: Cisco AVpair [1] 15 "coa-push=true"
    Jan 30 03:28:58.104: RADIUS: EAP-Message [79] 12 
    RADIUS: 02 3B 00 0A 01 75 73 65 72 32 [ ;user2]
    Jan 30 03:28:58.104: RADIUS: Message-Authenticato[80] 18 
    RADIUS: 12 62 2F 51 12 FC F7 EC F0 87 E0 34 1E F1 AD E5 [ b/Q4]
    Jan 30 03:28:58.104: RADIUS: NAS-IP-Address [4] 6 192.168.30.100 
    Jan 30 03:28:58.104: RADIUS(00000103): Sending a IPv4 Radius Packet
    Jan 30 03:28:58.105: RADIUS(00000103): Started 5 sec timeout
    Jan 30 03:28:58.109: RADIUS: Received from id 1645/88 192.168.30.110:1645, Access-Challenge, len 137
    RADIUS: authenticator 98 04 01 EA CD 9B 1E A9 - DC 6F 2F 17 1F 2A 5F 43
    Jan 30 03:28:58.109: RADIUS: State [24] 91 
    RADIUS: 35 32 43 50 4D 53 65 73 73 69 6F 6E 49 44 3D 4C [52CPMSessionID=L]
    RADIUS: 32 4C 34 32 46 32 46 30 31 31 36 5A 4F 32 4C 34 [2L42F2F0116ZO2L4]
    RADIUS: 32 46 32 46 30 31 36 46 5A 48 31 31 39 34 45 34 [2F2F016FZH1194E4]
    RADIUS: 34 34 5A 4E 32 30 3B 33 31 53 65 73 73 69 6F 6E [44ZN20;31Session]
    RADIUS: 49 44 3D 49 53 45 2D 44 49 41 4E 2F 34 39 33 30 [ID=ISE-SERVER/4930]
    RADIUS: 38 30 30 31 38 2F 33 30 3B [ 80018/30;]
    Jan 30 03:28:58.110: RADIUS: EAP-Message [79] 8 
    RADIUS: 01 35 00 06 0D 20 [ 5 ]
    Jan 30 03:28:58.110: RADIUS: Message-Authenticato[80] 18 
    RADIUS: E3 A6 88 B1 B6 3D 93 1F 39 B3 AE 9E EA 1D BB 15 [ =9]
    Jan 30 03:28:58.110: RADIUS(00000103): Received from id 1645/88
    RADIUS/DECODE: EAP-Message fragments, 6, total 6 bytes
    Jan 30 03:28:58.112: AAA/AUTHEN/LOGIN (00000103): Pick method list 'FlexVPN-Authentication-List' 
    Jan 30 03:28:58.112: RADIUS/ENCODE(00000103):Orig. component type = VPN IPSEC
    Jan 30 03:28:58.112: RADIUS/ENCODE(00000103): dropping service type, "radius-server attribute 6 on-for-login-auth" is off
    Jan 30 03:28:58.112: RADIUS(00000103): Config NAS IP: 0.0.0.0
    Jan 30 03:28:58.112: vrfid: [65535] ipv6 tableid : [0]
    Jan 30 03:28:58.113: idb is NULL
    Jan 30 03:28:58.113: RADIUS(00000103): Config NAS IPv6: ::
    Jan 30 03:28:58.113: RADIUS/ENCODE(00000103): acct_session_id: 4249
    Jan 30 03:28:58.113: RADIUS(00000103): sending
    Jan 30 03:28:58.113: RADIUS/ENCODE: Best Local IP-Address 192.168.30.100 for Radius-Server 192.168.30.110
    Jan 30 03:28:58.113: RADIUS: Message Authenticator encoded
    Jan 30 03:28:58.113: RADIUS(00000103): Send Access-Request to 192.168.30.110:1645 id 1645/89, len 316
    RADIUS: authenticator 56 BD F0 9A 4B 16 5C 6C - 4E 41 00 56 8D C0 3A 8C
    Jan 30 03:28:58.113: RADIUS: Service-Type [6] 6 Login [1]
    Jan 30 03:28:58.113: RADIUS: Vendor, Cisco [26] 26 
    Jan 30 03:28:58.113: RADIUS: Cisco AVpair [1] 20 "service-type=Login"
    Jan 30 03:28:58.113: RADIUS: Vendor, Cisco [26] 36 
    Jan 30 03:28:58.113: RADIUS: Cisco AVpair [1] 30 "isakmp-phase1-id=cisco.example"
    Jan 30 03:28:58.113: RADIUS: Calling-Station-Id [31] 13 "192.168.50.130"
    Jan 30 03:28:58.113: RADIUS: Vendor, Cisco [26] 64 
    Jan 30 03:28:58.113: RADIUS: Cisco AVpair [1] 58 "audit-session-id=L2L42F2F0116ZO2L42F2F016FZH1194E444ZN20"
    Jan 30 03:28:58.113: RADIUS: User-Name [1] 7 "user2"
    Jan 30 03:28:58.113: RADIUS: Vendor, Cisco [26] 21 
    Jan 30 03:28:58.113: RADIUS: Cisco AVpair [1] 15 "coa-push=true"
    Jan 30 03:28:58.113: RADIUS: EAP-Message [79] 8 
    RADIUS: 02 35 00 06 03 04 [ 5]
    Jan 30 03:28:58.113: RADIUS: Message-Authenticato[80] 18 
    RADIUS: 47 1F 36 A7 C3 9B 90 6E 03 2C B8 D7 FE A7 13 44 [ G6n,D]
    Jan 30 03:28:58.113: RADIUS: State [24] 91 
    RADIUS: 35 32 43 50 4D 53 65 73 73 69 6F 6E 49 44 3D 4C [52CPMSessionID=L]
    RADIUS: 32 4C 34 32 46 32 46 30 31 31 36 5A 4F 32 4C 34 [2L42F2F0116ZO2L4]
    RADIUS: 32 46 32 46 30 31 36 46 5A 48 31 31 39 34 45 34 [2F2F016FZH1194E4]
    RADIUS: 34 34 5A 4E 32 30 3B 33 31 53 65 73 73 69 6F 6E [44ZN20;31Session]
    RADIUS: 49 44 3D 49 53 45 2D 44 49 41 4E 2F 34 39 33 30 [ID=ISE-SERVER/4930]
    RADIUS: 38 30 30 31 38 2F 33 30 3B [ 80018/30;]
    Jan 30 03:28:58.114: RADIUS: NAS-IP-Address [4] 6 192.168.30.100 
    Jan 30 03:28:58.114: RADIUS(00000103): Sending a IPv4 Radius Packet
    Jan 30 03:28:58.114: RADIUS(00000103): Started 5 sec timeout
    Jan 30 03:28:58.116: RADIUS: Received from id 1645/89 192.168.30.110:1645, Access-Challenge, len 161
    RADIUS: authenticator 84 A3 30 3D 80 BC 71 42 - 1B 9B 49 EF 0B 1B 02 02
    Jan 30 03:28:58.116: RADIUS: State [24] 91 
    RADIUS: 35 32 43 50 4D 53 65 73 73 69 6F 6E 49 44 3D 4C [52CPMSessionID=L]
    RADIUS: 32 4C 34 32 46 32 46 30 31 31 36 5A 4F 32 4C 34 [2L42F2F0116ZO2L4]
    RADIUS: 32 46 32 46 30 31 36 46 5A 48 31 31 39 34 45 34 [2F2F016FZH1194E4]
    RADIUS: 34 34 5A 4E 32 30 3B 33 31 53 65 73 73 69 6F 6E [44ZN20;31Session]
    RADIUS: 49 44 3D 49 53 45 2D 44 49 41 4E 2F 34 39 33 30 [ID=ISE-SERVER/4930]
    RADIUS: 38 30 30 31 38 2F 33 30 3B [ 80018/30;]
    Jan 30 03:28:58.116: RADIUS: EAP-Message [79] 32 
    RADIUS: 01 36 00 1E 04 10 EB 9F A5 AC 70 1F 4D D6 48 05 9D EC 1F 29 67 AE 49 53 45 2D 44 49 41 4E [ 6pMH)gISE-SERVER]
    Jan 30 03:28:58.116: RADIUS: Message-Authenticato[80] 18 
    RADIUS: 08 5E BC EF E5 38 50 CD FB 3C B3 E9 99 0A 51 B3 [ ^8P<Q]
    Jan 30 03:28:58.116: RADIUS(00000103): Received from id 1645/89
    RADIUS/DECODE: EAP-Message fragments, 30, total 30 bytes
    Jan 30 03:28:58.118: AAA/AUTHEN/LOGIN (00000103): Pick method list 'FlexVPN-Authentication-List' 
    Jan 30 03:28:58.118: RADIUS/ENCODE(00000103):Orig. component type = VPN IPSEC
    Jan 30 03:28:58.118: RADIUS/ENCODE(00000103): dropping service type, "radius-server attribute 6 on-for-login-auth" is off
    Jan 30 03:28:58.118: RADIUS(00000103): Config NAS IP: 0.0.0.0
    Jan 30 03:28:58.118: vrfid: [65535] ipv6 tableid : [0]
    Jan 30 03:28:58.118: idb is NULL
    Jan 30 03:28:58.118: RADIUS(00000103): Config NAS IPv6: ::
    Jan 30 03:28:58.118: RADIUS/ENCODE(00000103): acct_session_id: 4249
    Jan 30 03:28:58.118: RADIUS(00000103): sending
    Jan 30 03:28:58.118: RADIUS/ENCODE: Best Local IP-Address 192.168.30.100 for Radius-Server 192.168.30.110
    Jan 30 03:28:58.119: RADIUS: Message Authenticator encoded
    Jan 30 03:28:58.119: RADIUS(00000103): Send Access-Request to 192.168.30.110:1645 id 1645/90, len 332
    RADIUS: authenticator A1 62 1A FB 18 58 7B 47 - 5C 8A 64 FA B7 23 9B BE
    Jan 30 03:28:58.119: RADIUS: Service-Type [6] 6 Login [1]
    Jan 30 03:28:58.119: RADIUS: Vendor, Cisco [26] 26 
    Jan 30 03:28:58.119: RADIUS: Cisco AVpair [1] 20 "service-type=Login"
    Jan 30 03:28:58.119: RADIUS: Vendor, Cisco [26] 36 
    Jan 30 03:28:58.119: RADIUS: Cisco AVpair [1] 30 "isakmp-phase1-id=cisco.example"
    Jan 30 03:28:58.119: RADIUS: Calling-Station-Id [31] 13 "192.168.50.130"
    Jan 30 03:28:58.119: RADIUS: Vendor, Cisco [26] 64 
    Jan 30 03:28:58.119: RADIUS: Cisco AVpair [1] 58 "audit-session-id=L2L42F2F0116ZO2L42F2F016FZH1194E444ZN20"
    Jan 30 03:28:58.119: RADIUS: User-Name [1] 7 "user2"
    Jan 30 03:28:58.119: RADIUS: Vendor, Cisco [26] 21 
    Jan 30 03:28:58.119: RADIUS: Cisco AVpair [1] 15 "coa-push=true"
    Jan 30 03:28:58.119: RADIUS: EAP-Message [79] 24 
    RADIUS: 02 36 00 16 04 10 73 B7 F2 42 09 5B AB 21 D8 77 96 A2 F7 C7 83 AD [ 6sB[!w]
    Jan 30 03:28:58.119: RADIUS: Message-Authenticato[80] 18 
    RADIUS: B1 68 3C 25 9E FE 52 13 10 69 E6 BB 17 67 6F 18 [ h<?Rigo]
    Jan 30 03:28:58.119: RADIUS: State [24] 91 
    RADIUS: 35 32 43 50 4D 53 65 73 73 69 6F 6E 49 44 3D 4C [52CPMSessionID=L]
    RADIUS: 32 4C 34 32 46 32 46 30 31 31 36 5A 4F 32 4C 34 [2L42F2F0116ZO2L4]
    RADIUS: 32 46 32 46 30 31 36 46 5A 48 31 31 39 34 45 34 [2F2F016FZH1194E4]
    RADIUS: 34 34 5A 4E 32 30 3B 33 31 53 65 73 73 69 6F 6E [44ZN20;31Session]
    RADIUS: 49 44 3D 49 53 45 2D 44 49 41 4E 2F 34 39 33 30 [ID=ISE-SERVER/4930]
    RADIUS: 38 30 30 31 38 2F 33 30 3B [ 80018/30;]
    Jan 30 03:28:58.119: RADIUS: NAS-IP-Address [4] 6 192.168.30.100 
    Jan 30 03:28:58.119: RADIUS(00000103): Sending a IPv4 Radius Packet
    Jan 30 03:28:58.119: RADIUS(00000103): Started 5 sec timeout
    Jan 30 03:28:58.186: RADIUS: Received from id 1645/90 192.168.30.110:1645, Access-Accept, len 233
    RADIUS: authenticator 48 A5 A0 11 ED B8 C2 87 - 35 30 17 D5 6D D7 B4 FD
    Jan 30 03:28:58.186: RADIUS: User-Name [1] 7 "user2"
    Jan 30 03:28:58.186: RADIUS: Class [25] 68 
    RADIUS: 43 41 43 53 3A 4C 32 4C 34 32 46 32 46 30 31 31 [CACS:L2L42F2F011]
    RADIUS: 36 5A 4F 32 4C 34 32 46 32 46 30 31 36 46 5A 48 [6ZO2L42F2F016FZH]
    RADIUS: 31 31 39 34 45 34 34 34 5A 4E 32 30 3A 49 53 45 [1194E444ZN20:ISE]
    RADIUS: 2D 44 49 41 4E 2F 34 39 33 30 38 30 30 31 38 2F [-DIAN/493080018/]
    RADIUS: 33 30 [ 30]
    Jan 30 03:28:58.186: RADIUS: EAP-Message [79] 6 
    RADIUS: 03 36 00 04 [ 6]
    Jan 30 03:28:58.186: RADIUS: Message-Authenticato[80] 18 
    RADIUS: 9E A6 D9 56 40 C8 EB 08 69 8C E1 35 35 53 18 83 [ V@i55S]
    Jan 30 03:28:58.187: RADIUS: Vendor, Cisco [26] 37 
    Jan 30 03:28:58.187: RADIUS: Cisco AVpair [1] 31 "ipsec:dns-servers=10.0.50.202"
    Jan 30 03:28:58.187: RADIUS: Vendor, Cisco [26] 47 
    Jan 30 03:28:58.187: RADIUS: Cisco AVpair [1] 41 "ipsec:route-set=prefix 192.168.200.0/24"
    Jan 30 03:28:58.187: RADIUS: Vendor, Cisco [26] 30 
    Jan 30 03:28:58.187: RADIUS: Cisco AVpair [1] 24 "ipsec:addr-pool=group2"
    Jan 30 03:28:58.187: RADIUS(00000103): Received from id 1645/90
    RADIUS/DECODE: EAP-Message fragments, 4, total 4 bytes
    Jan 30 03:28:58.190: AAA/BIND(00000104): Bind i/f 
    Jan 30 03:28:58.190: AAA/AUTHOR (0x104): Pick method list 'FlexVPN-Authorization-List'
    Jan 30 03:28:58.192: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access2, changed state to down
    Jan 30 03:28:58.209: %SYS-5-CONFIG_P: Configured programmatically by process Crypto INT from console as console
    Jan 30 03:28:58.398: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access2, changed state to up

    相關資訊

    修訂記錄

    修訂 發佈日期 意見
    1.0
    06-Feb-2024
    初始版本
    TAC Authored

    由思科工程師貢獻

    • 戴安娜·阿吉拉爾·馬丁內斯
      思科安全技術顧問工程師

    這份文件是否有所幫助？

    Feedback意見

    讓思科協助您

    本文件適用於這些產品