ASA 8.3及更高版本：DMZ上郵件(SMTP)伺服器訪問的配置示例

ASA#show run
: Saved
:
ASA Version 8.3(1)
!
hostname ASA
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
!
interface Ethernet0
 shutdown
 no nameif
 security-level 0
 no ip address
!
interface Ethernet1
 shutdown
 no nameif
 no security-level
 no ip address
!
interface Ethernet2
 no nameif
 no security-level
 no ip address
!

!--- Configure the inside interface.

interface Ethernet3
 nameif inside
 security-level 100
 ip address 10.1.1.1 255.255.255.0 
!

!--- Configure the outside interface.

interface Ethernet4
 nameif outside
 security-level 0
 ip address  192.168.200.225 255.255.255.224 
!

!--- Configure dmz interface.

interface Ethernet5
 nameif dmz
 security-level 10
 ip address 172.16.31.1 255.255.255.0 
!
passwd 2KFQnbNIdI.2KYOU encrypted
boot system disk0:/asa831-k8.bin
ftp mode passive


!--- This access list allows hosts to access !--- IP address 192.168.200.227 for the SMTP port.

 
access-list outside_int extended permit tcp any host  192.168.200.227 eq smtp 

 !--- Allows outgoing SMTP connections. !--- This access list allows host IP 172.16.31.10 !--- sourcing the SMTP port to access any host.


access-list dmz_int extended permit tcp host 172.16.31.10 eq smtp any

pager lines 24
mtu BB 1500
mtu inside 1500
mtu outside 1500
mtu dmz 1500  
no failover
no asdm history enable
arp timeout 14400


  object network obj-192.168.200.228-192.168.200.253
   range 192.168.200.228-192.168.200.253
 object network obj-192.168.200.254
   host 192.168.200.254

 object-group network nat-pat-group
   network-object object obj-192.168.200.228-192.168.200.253
   network-object object obj-192.168.200.254
   
 object network obj-10.1.1.0
   subnet 10.1.1.0 255.255.255.0
   nat (inside,outside) dynamic nat-pat-group


!--- This network static does not use address translation. !--- Inside hosts appear on the DMZ with their own addresses.


object network obj-10.1.1.0
   subnet 10.1.1.0 255.255.255.0
   nat (inside,dmz) static obj-10.1.1.0


!--- This network static uses address translation. !--- Hosts that access the mail server from the outside !--- use the 192.168.200.227 address.


object network obj-172.16.31.10
   host 172.16.31.10
   nat (dmz,outside) static 192.168.200.227 
access-group outside_int in interface outside
access-group dmz_int in interface dmz
route outside 0.0.0.0 0.0.0.0  192.168.200.226 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00
timeout mgcp-pat 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
no snmp-server location
no snmp-server contact
telnet timeout 5
ssh timeout 5
console timeout 0
!
class-map inspection_default
 match default-inspection-traffic
!
!

!--- The inspect esmtp command (included in the map) allows !--- SMTP/ESMTP to inspect the application.


policy-map global_policy
 class inspection_default
  inspect dns maximum-length 512 
  inspect ftp 
  inspect h323 h225 
  inspect h323 ras 
  inspect netbios 
  inspect rsh 
  inspect rtsp 
  inspect skinny 
  inspect esmtp
  inspect sqlnet 
  inspect sunrpc 
  inspect tftp 
  inspect sip 
  inspect xdmcp 
!

!--- The  inspect esmtp  command (included in the map) allows !--- SMTP/ESMTP to inspect the application.

service-policy global_policy global
Cryptochecksum:2653ce2c9446fb244b410c2161a63eda
: end
[OK]