Introdução
Este documento descreve como aumentar o relatório e retenção de dados do seguimento na ferramenta de segurança do email de Cisco (ESA) a fim permitir a sobreposição dos dados.
Pré-requisitos
A Cisco recomenda que você tenha conhecimento destes tópicos:
- Cisco ESA
- Dispositivo do Gerenciamento de segurança do índice de Cisco (S A)
Relatando dados
Quando um S A é autônomo ou inacessível, o ESA começa a enfileirar dados do relatório. O ESA retém à revelia 100 arquivos, cada um com uma duração 15-minute. Essencialmente, o ESA retém dados para a corrente 1,500 minutos (15 x 100), que é equivalente a 25 horas. Se o S A está para baixo por 30 horas, a seguir você perde os dados do relatório para as primeiras horas 5 (30 horas - 25 horas).
Use a informação neste exemplo a fim aumentar o número de arquivos que são retidos no ESA:
example.com> reportingconfig
Choose the operation you want to perform:
- MAILSETUP - Configure reporting for the ESA.
- MODE - Enable centralized or local reporting for the ESA.
[]> mailsetup
SenderBase timeout used by the web interface: 2 seconds
Sender Reputation Multiplier: 3
The current level of reporting data recording is: unlimited
No custom second level domains are defined.
Legacy mailflow report: Disabled
Choose the operation you want to perform:
- SENDERBASE - Configure SenderBase timeout for the web interface.
- MULTIPLIER - Configure Sender Reputation Multiplier.
- COUNTERS - Limit counters recorded by the reporting system.
- THROTTLING - Limit unique hosts tracked for rejected connection reporting.
- TLD - Add customer specific domains for reporting rollup.
- STORAGE - How long centralized reporting data will be stored on the C-series
before being overwritten.
- LEGACY - Configure legacy mailflow report.
[]> storage
While in centralized mode the C-series will store reporting data for the
M-series to collect. If the M-series does not collect that data then
eventually the C-series will begin to overwrite the oldest data with
new data.
A maximum of 24 hours of reporting data will be stored.
How many hours of reporting data should be stored before data loss?
[24]> 30
Seguindo dados
Similarmente, quando o S A é autônomo ou inacessível, o ESA começa a enfileirar o seguimento de dados. O ESA retém 60 arquivos, cada um com uma duração de três-minuto. Consequentemente, o ESA retém os dados para os 180 minutos passados (60 x 3). Todos os dados de seguimento que não forem recuperados do ESA e são mais velhos de três horas são perdidos.
Use a informação neste exemplo a fim aumentar o número máximo de seguir arquivos:
example.com> trackingconfig
Choose the operation you want to perform:
- MODE - Set whether tracking is run on box or centralized.
[]> storage
While in centralized mode the C-series will store tracking data for the
M-series to collect. If the M-series does not collect that data then
eventually the C-series will begin to overwrite the oldest data with new
data.
A maximum of 60 files are presently stored. This means a maximum of 3 hours
will be stored, though depending on load that time may be smaller.
How many files should be stored before data loss?
[60]> 500
Informações Relacionadas