Configurar o AnyConnect Secure Mobility Client para Linux com autenticação de certificado de cliente em um ASA

Atualizado:12 de Dezembro de 2022
ID do documento:214612

Linguagem imparcial

O conjunto de documentação deste produto faz o possível para usar uma linguagem imparcial. Para os fins deste conjunto de documentação, a imparcialidade é definida como uma linguagem que não implica em discriminação baseada em idade, deficiência, gênero, identidade racial, identidade étnica, orientação sexual, status socioeconômico e interseccionalidade. Pode haver exceções na documentação devido à linguagem codificada nas interfaces de usuário do software do produto, linguagem usada com base na documentação de RFP ou linguagem usada por um produto de terceiros referenciado. Saiba mais sobre como a Cisco está usando a linguagem inclusiva.

Sobre esta tradução

A Cisco traduziu este documento com a ajuda de tecnologias de tradução automática e humana para oferecer conteúdo de suporte aos seus usuários no seu próprio idioma, independentemente da localização. Observe que mesmo a melhor tradução automática não será tão precisa quanto as realizadas por um tradutor profissional. A Cisco Systems, Inc. não se responsabiliza pela precisão destas traduções e recomenda que o documento original em inglês (link fornecido) seja sempre consultado.

    Introduction

    Este documento descreve um exemplo de configuração para o acesso ao Cisco AnyConnect Secure Mobility Client do Adaptive Security Appliance (ASA).

    Background

    O exemplo de configuração descrito neste documento é para o acesso do Cisco AnyConnect Secure Mobility Client do Adaptive Security Appliance (ASA) que usa o certificado do cliente para autenticação de um sistema operacional (OS) Linux para que um usuário do AnyConnect se conecte com êxito a um ASA Headend.

    Prerequisites

    Requirements

    Este documento pressupõe que o ASA esteja totalmente operacional e configurado para permitir que o Cisco Adaptive Security Device Manager (ASDM) ou a Interface de Linha de Comando (CLI) façam alterações na configuração.


    A Cisco recomenda que você tenha conhecimento destes tópicos:

    Conhecimento básico do ASA CLI e ASDM
    Configuração de VPN SSL no Cisco ASA Head End
    Conhecimento fundamental de PKI
    Familiaridade com o sistema operacional Linux


    Componentes Utilizados

    As informações neste documento são baseadas nestas versões de software e hardware:

    Cisco Adaptive Security Appliance ASA5585-SSP-20
    Software Cisco Adaptive Security Appliance Versão 9.9(2)36
    Adaptive Security Device Manager versão 7.9(1)
    AnyConnect versão 4.6.03049
    SO Ubuntu 16.04.1 LTS

    Observação: faça o download do pacote AnyConnect VPN Client (anyconnect-linux*.pkg) do site Cisco Software Download. Copie o AnyConnect VPN Client para a memória flash do ASA, que é então baixada para os computadores de usuários remotos para estabelecer a conexão VPN SSL com o ASA.

    The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. Se a rede estiver ativa, certifique-se de que você entenda o impacto potencial de qualquer comando.

    Informações de Apoio


    Para uma autenticação de certificado de cliente bem-sucedida em dispositivos Linux, o AnyConnect Secure Mobility Client oferece suporte a estes armazenamentos de certificados:

    1. Armazenamento de certificados do sistema operacional Linux (PEM)
    2. Repositório de certificados do Firefox (NSS)


    Este documento é baseado na autenticação de certificado de cliente que usa um armazenamento de certificado PEM (Linux OS).


    1. Para usar o armazenamento de certificados do sistema operacional Linux, os certificados baseados em arquivos PEM são colocados nesses diretórios.

    Entidade Caminho Exemplo
    Certificado da autoridade de certificação (CA) /opt/.cisco/certificates/ca tactest:~$ ls /opt/.cisco/certificates/ca
    CACERT.pem VeriSignClass3PublicPrimaryCertificationAuthority-G5.pem
    Certificado do usuário /home/tactest/.cisco/certificates/client tactest:~$ ls /home/tactest/.cisco/certificates/client
    myclient.pem
    Chave privada do usuário [Usada inicialmente para criar CSR]: /home/tactest/.cisco/certificates/client/private tactest:~$ ls /home/tactest/.cisco/certificates/client/private
    myclient.key

    Observação: por padrão, o caminho para instalar o certificado do cliente e a chave privada não está presente, portanto, ele precisa ser criado manualmente com este comando:
    mkdir -p .cisco/certificates/client/private/


    Se você usar uma Autoridade de Certificação do Windows:


    1. Faça o download do Certificado CA (codificado na Base64) com a extensão .cer
    2. Faça o download do Certificado de Identidade do Usuário (codificado na Base64) com a extensão .cer
    3. Alterar a extensão de certificados da extensão .cer para .pem



    2. Para usar o armazenamento de certificados do Firefox (NSS), os usuários podem importar seus certificados pelo Firefox.
    O certificado CA para o ASA pode ser importado para o armazenamento de certificados NSS pelo cliente AnyConnect automaticamente se o usuário clicar no Always Connect na caixa de diálogo de mensagem de segurança de certificado quando a navegação para o ASA é executada com HTTPS.

    O AnyConnect Linux usa o armazenamento de certificados do Firefox (NSS) como padrão. Se isso falhar, ele usará o armazenamento de certificados do sistema operacional Linux.


    Observação: no momento, o AnyConnect em um sistema operacional Linux não oferece suporte à chave GNOME, portanto, o AnyConnect não pode usar o certificado importado para o anel de chave GNOME.
    Certifique-se de que não haja certificados relacionados no armazenamento de certificados do sistema operacional Linux e no armazenamento de certificados do Firefox (NSS) antes de importar um novo certificado do usuário.



    Certifique-se de que seus arquivos atendam a estes requisitos:

    • Todos os arquivos de certificado devem terminar com a extensão .pem.
    • Todos os arquivos de chave privada devem terminar com a extensão .key.
    • Um certificado de cliente e sua chave privada associada devem ter o mesmo nome de arquivo. Por exemplo: client.pem e client.key.


    Para um início limpo, use esta abordagem:

    • Armazenamento de certificados do sistema operacional Linux (PEM):
      A. Remova arquivos PEM desnecessários em /opt/.cisco/certificates, mas mantenha a /opt/.cisco/certificates/ca/VeriSignClass3PublicPrimaryCertificationAuthority-G5.pem certificado intacto. Este é o certificado de CA que o AnyConnect usa para executar a verificação de assinatura de código.
      B. Remova os certificados de usuário que não são necessários do caminho ~/.cisco/certificates.

    • Repositório de certificados do Firefox (NSS):
      Use as configurações do Firefox para inspecionar e excluir certificados relacionados importados pelo usuário ou pelo AnyConnect.

    Configurar

    Diagrama de Rede

    Screenshot 2019-06-30 at 11.13.56 AM

    Configurações

    Configuração do cliente Linux

    1. Faça download do pacote do AnyConnect, extraia o conteúdo e instale o aplicativo AnyConnect no cliente Linux.

    tactest:Documents$ pwd
/home/tactest/Documents
tactest:Documents$ ls
anyconnect-linux64-4.6.03049-predeploy-k9.tar.gz 
tactest:Documents$ tar -xvf anyconnect-linux64-4.6.03049-predeploy-k9.tar.gz 
tactest:Documents$ ls
anyconnect-linux64-4.6.03049  anyconnect-linux64-4.6.03049-predeploy-k9.tar.gz
tactest:Documents$ cd anyconnect-linux64-4.6.03049/vpn/
tactest:vpn$ sudo su
[sudo] password for tactest: 
root:vpn# pwd
/home/tactest/Documents/anyconnect-linux64-4.6.03049/vpn
root:vpn# ./vpn_install.sh 
Installing Cisco AnyConnect Secure Mobility Client...


    2. Crie uma solicitação de assinatura de certificado para o certificado de identidade no cliente Linux usando o OpenSSL.

    [dime@localhost ~]$ openssl genrsa -des3 -out server.key 2048
Generating RSA private key, 2048 bit long modulus
..................................+++
............................................+++
e is 65537 (0x10001)
Enter pass phrase for server.key:
Verifying - Enter pass phrase for server.key:
[dime@localhost ~]$ 
[dime@localhost ~]$ openssl rsa -in server.key -out server.key.insecure
Enter pass phrase for server.key:
writing RSA key
[dime@localhost ~]$ mv server.key server.key.secure
[dime@localhost ~]$ 
[dime@localhost ~]$ mv server.key.insecure server.key
[dime@localhost ~]$ 
[dime@localhost ~]$ !  The insecure key is now named server.key, and you can use this file to generate the CSR without passphrase. 
[dime@localhost ~]$ 
[dime@localhost ~]$ openssl req -new -key server.key -out server.csr
You are about to be asked to enter information that will be incorporated
into your certificate request.
What you are about to enter is what is called a Distinguished Name or a DN.
There are quite a few fields but you can leave some blank
For some fields there will be a default value,
If you enter '.', the field will be left blank.
-----
Country Name (2 letter code) [XX]:US
State or Province Name (full name) []:CA
Locality Name (eg, city) [Default City]:SJ
Organization Name (eg, company) [Default Company Ltd]:Cisco
Organizational Unit Name (eg, section) []:HTTS
Common Name (eg, your name or your server's hostname) []:dimenet
Email Address []:
Please enter the following 'extra' attributes
to be sent with your certificate request
A challenge password []:
An optional company name []:
[dime@localhost ~]$ 
[dime@localhost ~]$ ls | grep -i server
server.csr  server.key  server.key.secure 
[dime@localhost ~]$ 
[dime@localhost ~]$ cat server.csr
-----BEGIN CERTIFICATE REQUEST-----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-----END CERTIFICATE REQUEST-----
[dime@localhost ~]$


    3. O CSR gerado anteriormente pode ser usado para solicitar que a CA emita um certificado de identidade de usuário.

    4. Quando o certificado for emitido pela CA, copie-o para o cliente Linux.

    a. Crie um arquivo .pem em /home/tactest/.cisco/certificates/client usando o comando
        touch myclient.pem
    b. Copie o conteúdo do certificado codificado Base64 do certificado de identidade do cliente emitido pela CA.
    c. Edite o arquivo usando o comando
        vi  myclientcert.pem or nano myclientcert.pem
    d. Pressione "i" para inserir texto no arquivo.
    e. Cole o certificado codificado na Base64.
    f. Pressione Escape e, em seguida, digite :wq! para salvar e parar a função de edição de arquivo.
    5. Da mesma forma, coloque o certificado CA no caminho /opt/.cisco/certificates/ca

    Configuração do ASA via CLI

    Essa seção fornece a configuração de CLI para o Cisco AnyConnect Secure Mobility Client para fins de referência.

     
    interface GigabitEthernet0/1
 nameif outside
 security-level 0
 ip address 10.106.63.179 255.255.255.0 
!             
interface GigabitEthernet0/2
 nameif inside
 security-level 100
 ip address 192.168.30.1 255.255.255.0 
 
asdm image disk0:/asdm-791.bin
route outside 0.0.0.0 0.0.0.0 10.106.63.1 1

!--------------------Client pool configuration-----------------

ip local pool ANYCONNECT-POOL 192.168.100.1-192.168.100.254 mask 255.255.255.0

 
!--------------------Split ACL configuration--------------------
 
access-list SPLIT-TUNNEL standard permit 10.0.0.0 255.255.255.0 


!------Configure Trustpoint containing ASA Identity Certificate ------

crypto ca trustpoint IDENTITY
 enrollment terminal
 subject-name CN=bglanyconnect.cisco.com
 keypair ID_CERT
 crl configure
 
!-------Apply trustpoint on outside interface------

ssl trust-point IDENTITY outside

!-------Enable AnyConnect and setup AnyConnect Image------

webvpn
 enable outside
 anyconnect image disk0:/anyconnect-linux64-4.6.03049-webdeploy-k9.pkg 1
 anyconnect enable
 tunnel-group-list enable
 
 
!--------------------Group Policy configuration--------------------


group-policy GroupPolicy_ANYCONNECT-PROFILE internal
group-policy GroupPolicy_ANYCONNECT-PROFILE attributes
 dns-server value 10.10.10.99
 vpn-tunnel-protocol ssl-client ssl-clientless
 split-tunnel-policy tunnelspecified
 split-tunnel-network-list value SPLIT-TUNNEL
 default-domain value cisco.com
 
!----------Tunnel-Group (Connection Profile) Configuraiton----------

tunnel-group ANYCONNECT_PROFILE type remote-access
tunnel-group ANYCONNECT_PROFILE general-attributes
 address-pool ANYCONNECT-POOL
 default-group-policy GroupPolicy_ANYCONNECT-PROFILE
tunnel-group ANYCONNECT_PROFILE webvpn-attributes
 authentication certificate
 group-alias ANYCONNECT-PROFILE enable
 
: end

    Verificar

    Use esta seção para confirmar se a sua configuração funciona corretamente.

    1. Em um Ubuntu OS 16.04.1 LTS, conecte o AnyConnect pela GUI.


      AnyConnect Connection 01
    2. Se quiser conectar o AnyConnect pela linha de comando em um cliente Linux, navegue para este caminho:

      tactest:vpn$ cd /opt/cisco/anyconnect/bin
tactest:vpn$
tactest:bin$ ./vpn
Cisco AnyConnect Secure Mobility Client (version 4.6.03049) .

Copyright (c) 2004 - 2018 Cisco Systems, Inc.  All Rights Reserved.


  >> state: Disconnected
  >> state: Disconnected
  >> notice: Ready to connect.
  >> registered with local VPN subsystem.
VPN>
    3. Verifique se o cliente AnyConnect pode estabelecer a conexão:

      VPN>  connect bglanyconnect.cisco.com
 connect bglanyconnect.cisco.com
  >> contacting host (bglanyconnect.cisco.com) for login information...
  >> notice: Contacting bglanyconnect.cisco.com.

  >> Your client certificate will be used for authentication
Group: ANYCONNECT-PROFILE
  >> state: Connecting
  >> notice: Establishing VPN session...
The AnyConnect Downloader is analyzing this computer. Please wait...
The AnyConnect Downloader is performing update checks...
  >> notice: The AnyConnect Downloader is performing update checks...
  >> notice: Checking for profile updates...
The AnyConnect Downloader updates have been completed.
Please wait while the VPN connection is established...
  >> state: Connecting
  >> notice: Checking for product updates...
  >> notice: Checking for customization updates...
  >> notice: Performing any required updates...
  >> notice: The AnyConnect Downloader updates have been completed.
  >> notice: Establishing VPN session...
  >> notice: Establishing VPN - Initiating connection...
  >> notice: Establishing VPN - Examining system...
  >> notice: Establishing VPN - Activating VPN adapter...
  >> notice: Establishing VPN - Configuring system...
  >> notice: Establishing VPN...
  >> state: Connected
  >> notice: Connected to bglanyconnect.cisco.com.
  >> state: Connected
  >> notice: Connected to bglanyconnect.cisco.com.

VPN> disconnect
disconnect
  >> state: Disconnecting
  >> notice: Disconnect in progress, please wait...
  >> state: Disconnecting
  >> notice: Disconnect in progress, please wait...
  >> state: Disconnecting
  >> state: Disconnected
  >> notice: Ready to connect.
  >> state: Disconnected
  >> notice: Ready to connect.
VPN>

      Observação: se o cliente GUI do AnyConnect já estiver aberto e você tentar conectar o AnyConnect pela CLI, você receberá esse erro.

      VPN> connect bglanyconnect.cisco.com 
connect bglanyconnect.cisco.com 
>> contacting host (bglanyconnect.cisco.com) for login information... 
>> state: Disconnected 
>> error: Connect not available. Another AnyConnect application is running
or this functionality was not requested by this application. 
VPN>
      note-icon

      Observação: nesse caso, feche o cliente GUI do AnyConnect e conecte-se pela CLI do AnyConnect.

    4. Depois de conectada com êxito, os detalhes do cliente AnyConnect podem ser verificados pela seleção do Statistics no cliente AnyConnect GUI


      AnyConnect Statistics 02
    5. Esse comando é usado para confirmar os certificados CA e Identity presentes no Adaptive Security Appliance (ASA).

      bglanyconnect# show crypto ca certificate
Certificate
  Status: Available
  Certificate Serial Number: 640000004944fa39c42d24c199000000000049
  Certificate Usage: General Purpose
  Public Key Type: RSA (1024 bits)
  Signature Algorithm: SHA256 with RSA Encryption
  Issuer Name: 
    cn=SHERLOCK-CA
    dc=calo
    dc=lab
  Subject Name:
    cn=bglanyconnect.cisco.com
  CRL Distribution Points: 
    [1]  ldap:///CN=SHERLOCK-CA,CN=sherlock,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=calo,DC=lab?certificateRevocationList?base?objectClass=cRLDistributionPoint
  Validity Date: 
    start date: 03:00:53 UTC Jun 28 2019
    end   date: 03:00:53 UTC Jun 27 2021
  Storage: config
  Associated Trustpoints: IDENTITY 

CA Certificate
  Status: Available
  Certificate Serial Number: 4a39345869f0e2aa4e8d60143b6d90f7
  Certificate Usage: Signature
  Public Key Type: RSA (2048 bits)
  Signature Algorithm: SHA256 with RSA Encryption
  Issuer Name: 
    cn=SHERLOCK-CA
    dc=calo
    dc=lab    
  Subject Name: 
    cn=SHERLOCK-CA
    dc=calo
    dc=lab
  Validity Date: 
    start date: 10:23:28 UTC Sep 22 2017
    end   date: 10:33:28 UTC Sep 22 2037
  Storage: config
  Associated Trustpoints: IDENTITY
    6. Esses comandos show podem ser executados para confirmar o status do cliente AnyConnect e suas estatísticas.

      bglanyconnect# show vpn-session anyconnect  

Session Type: AnyConnect

Username     : dimenet                Index        : 46
Assigned IP  : 192.168.100.1          Public IP    : 10.106.44.166
Protocol     : AnyConnect-Parent SSL-Tunnel DTLS-Tunnel
License      : AnyConnect Premium
Encryption   : AnyConnect-Parent: (1)none  SSL-Tunnel: (1)AES-GCM-256  DTLS-Tunnel: (1)AES256
Hashing      : AnyConnect-Parent: (1)none  SSL-Tunnel: (1)SHA384  DTLS-Tunnel: (1)SHA1
Bytes Tx     : 12756                  Bytes Rx     : 1843
Group Policy : GroupPolicy_ANYCONNECT-PROFILE
Tunnel Group : ANYCONNECT_PROFILE
Login Time   : 20:49:30 UTC Sat Jun 29 2019
Duration     : 0h:15m:19s
Inactivity   : 0h:00m:00s
VLAN Mapping : N/A                    VLAN         : none
Audt Sess ID : 1e1e1e010002e0005d17ceda
Security Grp : none                   

bglanyconnect# 
bglanyconnect# show vpn-session detail anyconnect filter name dimenet

Session Type: AnyConnect Detailed

Username     : dimenet                Index        : 46
Assigned IP  : 192.168.100.1          Public IP    : 10.106.44.166
Protocol     : AnyConnect-Parent SSL-Tunnel DTLS-Tunnel
License      : AnyConnect Premium
Encryption   : AnyConnect-Parent: (1)none  SSL-Tunnel: (1)AES-GCM-256  DTLS-Tunnel: (1)AES256
Hashing      : AnyConnect-Parent: (1)none  SSL-Tunnel: (1)SHA384  DTLS-Tunnel: (1)SHA1
Bytes Tx     : 12756                  Bytes Rx     : 1843
Pkts Tx      : 10                     Pkts Rx      : 29
Pkts Tx Drop : 0                      Pkts Rx Drop : 0
Group Policy : GroupPolicy_ANYCONNECT-PROFILE
Tunnel Group : ANYCONNECT_PROFILE
Login Time   : 20:49:30 UTC Sat Jun 29 2019
Duration     : 0h:15m:25s
Inactivity   : 0h:00m:00s
VLAN Mapping : N/A                    VLAN         : none
Audt Sess ID : 1e1e1e010002e0005d17ceda
Security Grp : none                   

AnyConnect-Parent Tunnels: 1
SSL-Tunnel Tunnels: 1
DTLS-Tunnel Tunnels: 1

AnyConnect-Parent:
  Tunnel ID    : 46.1
  Public IP    : 10.106.44.166
  Encryption   : none                   Hashing      : none                   
  TCP Src Port : 58918                  TCP Dst Port : 443                    
  Auth Mode    : Certificate            
  Idle Time Out: 30 Minutes             Idle TO Left : 14 Minutes             
  Client OS    : linux-64
  Client OS Ver: Linux 4.4.0-31-generic #50-Ubuntu SMP Wed Jul 13 00:07:12 UTC 2016 x86_64
  Client Type  : AnyConnect
  Client Ver   : Cisco AnyConnect VPN Agent for Linux 4.6.03049
  Bytes Tx     : 6378                   Bytes Rx     : 0                      
  Pkts Tx      : 5                      Pkts Rx      : 0                      
  Pkts Tx Drop : 0                      Pkts Rx Drop : 0                      
  
SSL-Tunnel:
  Tunnel ID    : 46.2
  Assigned IP  : 192.168.100.1          Public IP    : 10.106.44.166
  Encryption   : AES-GCM-256            Hashing      : SHA384                 
  Ciphersuite  : ECDHE-RSA-AES256-GCM-SHA384                       
  Encapsulation: TLSv1.2                TCP Src Port : 58924                  
  TCP Dst Port : 443                    Auth Mode    : Certificate            
  Idle Time Out: 30 Minutes             Idle TO Left : 14 Minutes             
  Client OS    : Linux_64               
  Client Type  : SSL VPN Client
  Client Ver   : Cisco AnyConnect VPN Agent for Linux 4.6.03049
  Bytes Tx     : 6378                   Bytes Rx     : 59                     
  Pkts Tx      : 5                      Pkts Rx      : 1                      
  Pkts Tx Drop : 0                      Pkts Rx Drop : 0                      
  
DTLS-Tunnel:
  Tunnel ID    : 46.3
  Assigned IP  : 192.168.100.1          Public IP    : 10.106.44.166
  Encryption   : AES256                 Hashing      : SHA1                   
  Ciphersuite  : DHE-RSA-AES256-SHA                                
  Encapsulation: DTLSv1.0               UDP Src Port : 43180                  
  UDP Dst Port : 443                    Auth Mode    : Certificate            
  Idle Time Out: 30 Minutes             Idle TO Left : 27 Minutes             
  Client OS    : Linux_64               
  Client Type  : DTLS VPN Client
  Client Ver   : Cisco AnyConnect VPN Agent for Linux 4.6.03049
  Bytes Tx     : 0                      Bytes Rx     : 1784                   
  Pkts Tx      : 0                      Pkts Rx      : 28                     
  Pkts Tx Drop : 0                      Pkts Rx Drop : 0


    7. Para confirmar se o cliente Linux tem o certificado no formato correto (codificação Base64 com extensão .pem), navegue até o caminho fornecido e use este comando:

      tactest:client$ cd  /home/tactest/.cisco/certificates/client
tactest-client$
tactest:client$ ls
myclient.pem 
tactest-client$
tactest:client$ openssl x509 -in myclient.pem -text -noout  
Certificate:
    Data:
        Version: 3 (0x2)
        Serial Number:
            64:00:00:00:47:14:e8:bc:85:e5:1d:bf:c4:00:00:00:00:00:47
    Signature Algorithm: sha256WithRSAEncryption
        Issuer: DC=lab, DC=calo, CN=SHERLOCK-CA
        Validity
            Not Before: Jun 27 15:02:04 2019 GMT
            Not After : Jun 26 15:02:04 2021 GMT
        Subject: C=US, ST=CA, L=SJ, O=Cisco, OU=HTTS, CN=dimenet
        Subject Public Key Info:
            Public Key Algorithm: rsaEncryption
                Public-Key: (2048 bit)
                Modulus:
                    00:c3:42:18:d8:fc:09:72:92:81:2f:5d:aa:d4:c6:
                    bf:4c:10:b0:f6:ad:21:ae:f9:9c:50:0b:f0:aa:b7:
                    02:a0:11:52:e0:23:68:e0:71:f7:67:b9:9f:bd:0b:
                    9d:88:70:66:d2:26:3d:ac:a9:1a:ad:1f:47:0c:9f:
                    5e:51:09:68:4a:31:f1:ed:86:48:bb:82:24:06:ad:
                    d4:e4:0a:9e:56:f2:7d:f9:bc:11:97:d1:b6:52:3e:
                    4b:a6:fe:99:ff:6b:c3:ab:32:d9:24:ae:15:70:82:
                    d5:1e:62:ef:68:f0:e3:b7:84:29:58:b0:d2:8f:40:
                    60:96:cf:ca:fd:04:72:a4:0a:37:ab:88:2e:59:3b:
                    eb:86:41:6f:da:be:a6:64:b1:6c:be:e5:00:42:af:
                    a8:82:1f:2c:14:78:26:4f:c4:61:19:94:96:df:cc:
                    05:21:e5:12:36:ff:4d:f5:ac:f5:f6:45:1f:4c:16:
                    47:73:9b:84:ad:48:66:04:a9:15:49:ba:cc:d6:58:
                    f9:30:71:c5:46:f9:05:e1:b5:09:3b:ee:3c:ce:f5:
                    fa:89:54:d3:7f:14:8a:b3:32:1c:3f:19:07:6c:1a:
                    cb:95:23:16:8b:ca:44:c7:d6:0a:3c:35:a3:ec:5d:
                    f9:2b:58:41:11:32:00:53:43:31:70:36:cc:86:04:
                    6d:4b
                Exponent: 65537 (0x10001)
        X509v3 extensions:
            X509v3 Subject Key Identifier: 
                45:64:99:B1:5F:A1:7C:5F:4F:77:0D:12:CE:B8:F8:CA:40:4D:FA:A8
            X509v3 Authority Key Identifier: 
                keyid:1B:51:FF:8A:71:E7:9C:2B:66:29:28:FD:44:16:BF:44:A4:A1:7D:E1

            X509v3 CRL Distribution Points: 

                Full Name:
                  URI:ldap:///CN=SHERLOCK-CA,CN=sherlock,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=calo,DC=lab?certificateRevocationList?base?objectClass=cRLDistributionPoint

            Authority Information Access: 
                CA Issuers - URI:ldap:///CN=SHERLOCK-CA,CN=AIA,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=calo,DC=lab?cACertificate?base?objectClass=certificationAuthority

            X509v3 Key Usage: critical
                Digital Signature, Key Encipherment
            1.3.6.1.4.1.311.21.7: 
                0..&+.....7.....E...........U..r.T...V......d...
            X509v3 Extended Key Usage: 
                TLS Web Client Authentication
            1.3.6.1.4.1.311.21.10: 
                0.0
..+.......
    Signature Algorithm: sha256WithRSAEncryption
         0b:4d:46:fe:dd:0b:78:1a:35:ea:2b:d6:d6:33:ef:5a:86:5a:
         07:63:db:ef:ae:b3:87:e3:4d:c7:e8:d2:39:fe:5a:f2:8b:40:
         1e:f0:92:3f:48:ed:4d:67:e3:a6:44:05:6f:db:d8:96:bb:a6:
         a4:c7:98:fa:40:a5:aa:2d:1f:4b:49:32:1a:86:71:3d:72:69:
         f3:3f:e6:9f:f7:94:56:2e:10:0c:4c:c1:74:f1:ee:0e:28:00:
         bb:84:84:99:4d:07:ba:1b:68:1d:b5:98:f6:b7:96:55:c1:b8:
         5e:14:53:88:82:07:4e:3c:d8:7e:b0:f4:8d:1c:05:fd:8b:20:
         12:a4:94:05:7c:ad:81:63:50:05:8d:44:40:31:7c:e0:a8:33:
         1e:a3:19:c2:cb:bf:c8:03:b3:05:08:52:23:7e:11:ad:45:04:
         bd:0e:5a:8b:26:60:8f:3e:1c:98:41:f9:4d:3e:1a:1f:c8:d5:
         97:e3:0a:40:cb:0b:23:ba:9a:f7:27:d6:a1:c5:fd:91:dc:6d:
         04:ab:b7:d5:1d:54:d7:b3:ab:99:45:df:c1:01:b8:16:6e:40:
         c9:76:9e:36:36:b8:fc:e3:a1:03:86:61:2b:ac:ec:6d:c9:f4:
         91:ff:81:58:30:24:d3:81:8b:f0:20:23:49:7a:84:0f:91:80:
         2b:54:96:4d


      Se você recebeu o erro mostrado aqui, isso significa que você tentou exibir um certificado codificado por DER e ele não era um certificado codificado por PEM 

      unable to load certificate
12626:error:0906D06C:PEM routines:PEM_read_bio:no start line:pem_lib.c:647:Expecting: TRUSTED CERTIFICATE

    Troubleshoot

    Esta seção fornece as informações que você pode usar para solucionar problemas da sua configuração.

    Nota:Consulte Informações Importantes sobre Comandos de Depuração antes de usar comandos debug.

    Cuidado: no ASA, você pode definir vários níveis de depuração; por padrão, o nível 1 é usado. Se você alterar o nível de depuração, o detalhamento das depurações poderá aumentar. Faça isso com cuidado, especialmente em ambientes de produção.


    Para solucionar problemas de uma conexão de cliente AnyConnect de entrada do cliente do sistema operacional Linux, use:

    • Para o processo do AnyConnect em um ASA

      debug webvpn anyconnect 255

    Aqui está um exemplo de depuração obtido em um ASA de um cenário de trabalho:

    %ASA-7-609001: Built local-host outside:10.106.44.166
%ASA-6-302013: Built inbound TCP connection 13540 for outside:10.106.44.166/58944 (10.106.44.166/58944) to identity:10.106.63.179/443 (10.106.63.179/443)
%ASA-6-725001: Starting SSL handshake with client outside:10.106.44.166/58944 to 10.106.63.179/443 for TLS session
%ASA-7-725010: Device supports the following 20 cipher(s)
%ASA-7-725011: Cipher[1] : ECDHE-ECDSA-AES256-GCM-SHA384
%ASA-7-725011: Cipher[2] : ECDHE-RSA-AES256-GCM-SHA384
%ASA-7-725011: Cipher[3] : DHE-RSA-AES256-GCM-SHA384
%ASA-7-725011: Cipher[4] : AES256-GCM-SHA384
%ASA-7-725011: Cipher[5] : ECDHE-ECDSA-AES256-SHA384
%ASA-7-725011: Cipher[6] : ECDHE-RSA-AES256-SHA384
%ASA-7-725011: Cipher[7] : DHE-RSA-AES256-SHA256
%ASA-7-725011: Cipher[8] : AES256-SHA256
%ASA-7-725011: Cipher[9] : ECDHE-ECDSA-AES128-GCM-SHA256
%ASA-7-725011: Cipher[10] : ECDHE-RSA-AES128-GCM-SHA256
%ASA-7-725011: Cipher[11] : DHE-RSA-AES128-GCM-SHA256
%ASA-7-725011: Cipher[12] : AES128-GCM-SHA256
%ASA-7-725011: Cipher[13] : ECDHE-ECDSA-AES128-SHA256
%ASA-7-725011: Cipher[14] : ECDHE-RSA-AES128-SHA256
%ASA-7-725011: Cipher[15] : DHE-RSA-AES128-SHA256
%ASA-7-725011: Cipher[16] : AES128-SHA256
%ASA-7-725011: Cipher[17] : DHE-RSA-AES256-SHA
%ASA-7-725011: Cipher[18] : AES256-SHA
%ASA-7-725011: Cipher[19] : DHE-RSA-AES128-SHA
%ASA-7-725011: Cipher[20] : AES128-SHA
%ASA-7-725008: SSL client outside:10.106.44.166/58944 to 10.106.63.179/443 proposes the following 21 cipher(s)
%ASA-7-725011: Cipher[1] : ECDHE-ECDSA-AES256-GCM-SHA384
%ASA-7-725011: Cipher[2] : ECDHE-RSA-AES256-GCM-SHA384
%ASA-7-725011: Cipher[3] : DHE-RSA-AES256-GCM-SHA384
%ASA-7-725011: Cipher[4] : AES256-GCM-SHA384
%ASA-7-725011: Cipher[5] : ECDHE-ECDSA-AES256-SHA384
%ASA-7-725011: Cipher[6] : ECDHE-RSA-AES256-SHA384
%ASA-7-725011: Cipher[7] : DHE-RSA-AES256-SHA256
%ASA-7-725011: Cipher[8] : AES256-SHA256
%ASA-7-725011: Cipher[9] : ECDHE-ECDSA-AES128-GCM-SHA256
%ASA-7-725011: Cipher[10] : ECDHE-RSA-AES128-GCM-SHA256
%ASA-7-725011: Cipher[11] : DHE-RSA-AES128-GCM-SHA256
%ASA-7-725011: Cipher[12] : AES128-GCM-SHA256
%ASA-7-725011: Cipher[13] : ECDHE-ECDSA-AES128-SHA256
%ASA-7-725011: Cipher[14] : ECDHE-RSA-AES128-SHA256
%ASA-7-725011: Cipher[15] : DHE-RSA-AES128-SHA256
%ASA-7-725011: Cipher[16] : AES128-SHA256
%ASA-7-725011: Cipher[17] : DHE-RSA-AES256-SHA
%ASA-7-725011: Cipher[18] : AES256-SHA
%ASA-7-725011: Cipher[19] : DHE-RSA-AES128-SHA
%ASA-7-725011: Cipher[20] : AES128-SHA
%ASA-7-725011: Cipher[21] : DES-CBC3-SHA
%ASA-7-725012: Device chooses cipher ECDHE-RSA-AES256-GCM-SHA384 for the SSL session with client outside:10.106.44.166/58944 to 10.106.63.179/443
%ASA-6-725016: Device selects trust-point IDENTITY for client outside:10.106.44.166/58944 to 10.106.63.179/443
%ASA-6-725002: Device completed SSL handshake with client outside:10.106.44.166/58944 to 10.106.63.179/443 for TLSv1.2 session
%ASA-6-725007: SSL session with client outside:10.106.44.166/58944 to 10.106.63.179/443 terminated
%ASA-6-302014: Teardown TCP connection 13540 for outside:10.106.44.166/58944 to identity:10.106.63.179/443 duration 0:00:00 bytes 2948 TCP Reset-I from identity
%ASA-7-609002: Teardown local-host outside:10.106.44.166 duration 0:00:00
%ASA-7-609001: Built local-host outside:10.106.44.166
%ASA-6-302013: Built inbound TCP connection 13541 for outside:10.106.44.166/58946 (10.106.44.166/58946) to identity:10.106.63.179/443 (10.106.63.179/443)
%ASA-6-725001: Starting SSL handshake with client outside:10.106.44.166/58946 to 10.106.63.179/443 for TLS session
%ASA-7-725010: Device supports the following 20 cipher(s)
%ASA-7-725011: Cipher[1] : ECDHE-ECDSA-AES256-GCM-SHA384
%ASA-7-725011: Cipher[2] : ECDHE-RSA-AES256-GCM-SHA384
%ASA-7-725011: Cipher[3] : DHE-RSA-AES256-GCM-SHA384
%ASA-7-725011: Cipher[4] : AES256-GCM-SHA384
%ASA-7-725011: Cipher[5] : ECDHE-ECDSA-AES256-SHA384
%ASA-7-725011: Cipher[6] : ECDHE-RSA-AES256-SHA384
%ASA-7-725011: Cipher[7] : DHE-RSA-AES256-SHA256
%ASA-7-725011: Cipher[8] : AES256-SHA256
http_parse_cstp_method()
...input: 'CONNECT /CSCOSSLC/tunnel HTTP/1.1'
webvpn_cstp_parse_request_field()
...input: 'Host: bglanyconnect.cisco.com'
Processing CSTP header line: 'Host: bglanyconnect.cisco.com'
webvpn_cstp_parse_request_field()
...input: 'User-Agent: Cisco AnyConnect VPN Agent for Linux 4.6.03049'
Processing CSTP header line: 'User-Agent: Cisco AnyConnect VPN Agent for Linux 4.6.03049'
Setting user-agent to: 'Cisco AnyConnect VPN Agent for Linux 4.6.03049'
webvpn_cstp_parse_request_field()
...input: 'Cookie: webvpn=05B9EB@192512@A755@0A99DF461C27977CA12A0EAB41F5D7CD46AD8162'
Processing CSTP header line: 'Cookie: webvpn=05B9EB@192512@A755@0A99DF461C27977CA12A0EAB41F5D7CD46AD8162'
Found WebVPN cookie: 'webvpn=05B9EB@192512@A755@0A99DF461C27977CA12A0EAB41F5D7CD46AD8162'
WebVPN Cookie: 'webvpn=05B9EB@192512@A755@0A99DF461C27977CA12A0EAB41F5D7CD46AD8162'
webvpn_cstp_parse_request_field()
...input: 'X-CSTP-Version: 1'
Processing CSTP header line: 'X-CSTP-Version: 1'
webvpn_cstp_parse_request_field()
...input: 'X-CSTP-Hostname: tactest-virtual-machine'
Processing CSTP header line: 'X-CSTP-Hostname: tactest-virtual-machine'
Setting hostname to: 'tactest-virtual-machine'
webvpn_cstp_parse_request_field()
...input: 'X-CSTP-MTU: 1399'
Processing CSTP header line: 'X-CSTP-MTU: 1399'
webvpn_cstp_parse_request_field()
...input: 'X-CSTP-Address-Type: IPv6,IPv4'
Processing CSTP header line: 'X-CSTP-Address-Type: IPv6,IPv4'
webvpn_cstp_parse_request_field()
...input: 'X-CSTP-Local-Address-IP4: 10.106.44.166'
Processing CSTP header line: 'X-CSTP-Local-Address-IP4: 10.106.44.166'
webvpn_cstp_parse_request_field()
...input: 'X-CSTP-Base-MTU: 1500'
Processing CSTP header line: 'X-CSTP-Base-MTU: 1500'
webvpn_cstp_parse_request_field()
...input: 'X-CSTP-Remote-Address-IP4: 10.106.63.179'
Processing CSTP header line: 'X-CSTP-Remote-Address-IP4: 10.106.63.179'
webvpn_cstp_parse_request_field()
...input: 'X-CSTP-Full-IPv6-Capability: true'
Processing CSTP header line: 'X-CSTP-Full-IPv6-Capability: true'
webvpn_cstp_parse_request_field()
...input: 'X-DTLS-Master-Secret: F731F1B9371EC4E34DF4FF3FE230D5150B621C30F45D44D9579918C0CFF03BC7EEA7AEA1A59D247F6B70FC8B24237639'
Processing CSTP header line: 'X-DTLS-Master-Secret: F731F1B9371EC4E34DF4FF3FE230D5150B621C30F45D44D9579918C0CFF03BC7EEA7AEA1A59D247F6B70FC8B24237639'
webvpn_cstp_parse_request_field()
...input: 'X-DTLS-CipherSuite: DHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:AES256-SHA:AES128-SHA:DES-CBC3-SHA'
Processing CSTP header line: 'X-DTLS-CipherSuite: DHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:AES256-SHA:AES128-SHA:DES-CBC3-SHA'
webvpn_cstp_parse_request_field()
...input: 'X-DTLS-Accept-Encoding: lzs'
Processing CSTL header line: 'X-DTLS-Accept-Encoding: lzs'
webvpn_cstp_parse_request_field()
...input: 'X-DTLS-Header-Pad-Length: 0'
webvpn_cstp_parse_request_field()
...input: 'X-CSTP-Accept-Encoding: lzs'
Processing CSTP header line: 'X-CSTP-Accept-Encoding: lzs'
webvpn_cstp_parse_request_field()
...input: 'X-CSTP-Protocol: Copyright (c) 2004 Cisco Systems, Inc.'
Processing CSTP header line: 'X-CSTP-Protocol: Copyright (c) 2004 Cisco Systems, Inc.'
cstp_util_address_ipv4_accept: address asigned: 192.168.100.1
cstp_util_address_ipv6_accept: No IPv6 Address
np_svc_create_session(0x2F000, 0x00007f884ad8fb00, TRUE)
webvpn_svc_np_setup
SVC ACL Name: NULL
SVC ACL ID: -1
vpn_put_uauth success for ip 192.168.100.1!
No SVC ACL
Iphdr=20 base-mtu=1500 def-mtu=1500 conf-mtu=1406
tcp-mss = 1460
path-mtu = 1460(mss)
TLS Block size = 16, version = 0x303
mtu = 1460(path-mtu) - 12(opts) - 5(ssl) - 16(iv) = 1427
mod-mtu = 1427(mtu) & 0xfff0(complement) = 1424
tls-mtu = 1424(mod-mtu) - 8(cstp) - 48(mac) - 1(pad) = 1367
DTLS Block size = 16
mtu = 1500(base-mtu) - 20(ip) - 8(udp) - 13(dtlshdr) - 16(dtlsiv) = 1443
mod-mtu = 1443(mtu) & 0xfff0(complement) = 1440
dtls-mtu = 1440(mod-mtu) - 1(cdtp) - 20(mac) - 1(pad) = 1418
computed tls-mtu=1367 dtls-mtu=1418 conf-mtu=1406
DTLS enabled for intf=3 (outside)
overide computed dtls-mtu=1418 with conf-mtu=1406
tls-mtu=1367 dtls-mtu=1406
SVC: adding to sessmgmt
Sending X-CSTP-DNS: 10.10.10.99
Sending X-CSTP-Split-Include msgs: for ACL - SPLIT-TUNNEL: Start
    Sending X-CSTP-Split-Include: 10.0.0.0/255.255.255.0
Sending X-CSTP-MTU: 1367
Sending X-DTLS-MTU: 1406
Sending X-CSTP-FW-RULE msgs: Start
Sending X-CSTP-FW-RULE msgs: Done
Sending X-CSTP-Quarantine: false
Sending X-CSTP-Disable-Always-On-VPN: false
Sending X-CSTP-Client-Bypass-Protocol: false
%ASA-7-725011: Cipher[9] : ECDHE-ECDSA-AES128-GCM-SHA256
%ASA-7-725011: Cipher[10] : ECDHE-RSA-AES128-GCM-SHA256
%ASA-7-725011: Cipher[11] : DHE-RSA-AES128-GCM-SHA256
%ASA-7-725011: Cipher[12] : AES128-GCM-SHA256
%ASA-7-725011: Cipher[13] : ECDHE-ECDSA-AES128-SHA256
%ASA-7-725011: Cipher[14] : ECDHE-RSA-AES128-SHA256
%ASA-7-725011: Cipher[15] : DHE-RSA-AES128-SHA256
%ASA-7-725011: Cipher[16] : AES128-SHA256
%ASA-7-725011: Cipher[17] : DHE-RSA-AES256-SHA
%ASA-7-725011: Cipher[18] : AES256-SHA
%ASA-7-725011: Cipher[19] : DHE-RSA-AES128-SHA
%ASA-7-725011: Cipher[20] : AES128-SHA
%ASA-7-725008: SSL client outside:10.106.44.166/58946 to 10.106.63.179/443 proposes the following 21 cipher(s)
%ASA-7-725011: Cipher[1] : ECDHE-ECDSA-AES256-GCM-SHA384
%ASA-7-725011: Cipher[2] : ECDHE-RSA-AES256-GCM-SHA384
%ASA-7-725011: Cipher[3] : DHE-RSA-AES256-GCM-SHA384
%ASA-7-725011: Cipher[4] : AES256-GCM-SHA384
%ASA-7-725011: Cipher[5] : ECDHE-ECDSA-AES256-SHA384
%ASA-7-725011: Cipher[6] : ECDHE-RSA-AES256-SHA384
%ASA-7-725011: Cipher[7] : DHE-RSA-AES256-SHA256
%ASA-7-725011: Cipher[8] : AES256-SHA256
%ASA-7-725011: Cipher[9] : ECDHE-ECDSA-AES128-GCM-SHA256
%ASA-7-725011: Cipher[10] : ECDHE-RSA-AES128-GCM-SHA256
%ASA-7-725011: Cipher[11] : DHE-RSA-AES128-GCM-SHA256
%ASA-7-725011: Cipher[12] : AES128-GCM-SHA256
%ASA-7-725011: Cipher[13] : ECDHE-ECDSA-AES128-SHA256
%ASA-7-725011: Cipher[14] : ECDHE-RSA-AES128-SHA256
%ASA-7-725011: Cipher[15] : DHE-RSA-AES128-SHA256
%ASA-7-725011: Cipher[16] : AES128-SHA256
%ASA-7-725011: Cipher[17] : DHE-RSA-AES256-SHA
%ASA-7-725011: Cipher[18] : AES256-SHA
%ASA-7-725011: Cipher[19] : DHE-RSA-AES128-SHA
%ASA-7-725011: Cipher[20] : AES128-SHA
%ASA-7-725011: Cipher[21] : DES-CBC3-SHA
%ASA-7-725012: Device chooses cipher ECDHE-RSA-AES256-GCM-SHA384 for the SSL session with client outside:10.106.44.166/58946 to 10.106.63.179/443
%ASA-6-725016: Device selects trust-point IDENTITY for client outside:10.106.44.166/58946 to 10.106.63.179/443
%ASA-7-717025: Validating certificate chain containing 1 certificate(s).
%ASA-7-717029: Identified client certificate within certificate chain. serial number: 640000004714E8BC85E51DBFC4000000000047, subject name: cn=dimenet,ou=HTTS,o=Cisco,l=SJ,st=CA,c=US.
%ASA-7-717030: Found a suitable trustpoint IDCERT to validate certificate.
%ASA-6-717022: Certificate was successfully validated. serial number: 640000004714E8BC85E51DBFC4000000000047, subject name:  cn=dimenet,ou=HTTS,o=Cisco,l=SJ,st=CA,c=US.
%ASA-6-717028: Certificate chain was successfully validated with warning, revocation status was not checked.
%ASA-6-725002: Device completed SSL handshake with client outside:10.106.44.166/58946 to 10.106.63.179/443 for TLSv1.2 session
%ASA-7-717036: Looking for a tunnel group match based on certificate maps for peer certificate with serial number: 640000004714E8BC85E51DBFC4000000000047, subject name: cn=dimenet,ou=HTTS,o=Cisco,l=SJ,st=CA,c=US, issuer_name: cn=SHERLOCK-CA,dc=calo,dc=lab.
%ASA-4-717037: Tunnel group search using certificate maps failed for peer certificate: serial number: 640000004714E8BC85E51DBFC4000000000047, subject name: cn=dimenet,ou=HTTS,o=Cisco,l=SJ,st=CA,c=US, issuer_name: cn=SHERLOCK-CA,dc=calo,dc=lab.
%ASA-7-113028: Extraction of username from VPN client certificate has been requested.  [Request 36]
%ASA-7-113028: Extraction of username from VPN client certificate has started.  [Request 36]
%ASA-7-113028: Extraction of username from VPN client certificate has finished successfully.  [Request 36]
%ASA-7-113028: Extraction of username from VPN client certificate has completed.  [Request 36]
%ASA-6-113009: AAA retrieved default group policy (GroupPolicy_ANYCONNECT-PROFILE) for user = dimenet
%ASA-7-734003: DAP: User dimenet, Addr 10.106.44.166: Session Attribute aaa.cisco.grouppolicy = GroupPolicy_ANYCONNECT-PROFILE
%ASA-7-734003: DAP: User dimenet, Addr 10.106.44.166: Session Attribute aaa.cisco.username = dimenet
%ASA-7-734003: DAP: User dimenet, Addr 10.106.44.166: Session Attribute aaa.cisco.username1 = dimenet
%ASA-7-734003: DAP: User dimenet, Addr 10.106.44.166: Session Attribute aaa.cisco.username2 = 
%ASA-7-734003: DAP: User dimenet, Addr 10.106.44.166: Session Attribute aaa.cisco.tunnelgroup = ANYCONNECT_PROFILE
%ASA-6-734001: DAP: User dimenet, Addr 10.106.44.166, Connection AnyConnect: The following DAP records were selected for this connection: DfltAccessPolicy
%ASA-6-113039: Group <GroupPolicy_ANYCONNECT-PROFILE> User <dimenet> IP <10.106.44.166> AnyConnect parent session started.%ASA-6-725016: Device selects trust-point IDENTITY for client outside:10.106.44.166/58946 to 10.106.63.179/443
%ASA-6-302013: Built inbound TCP connection 13542 for outside:10.106.44.166/58952 (10.106.44.166/58952) to identity:10.106.63.179/443 (10.106.63.179/443)
%ASA-6-725001: Starting SSL handshake with client outside:10.106.44.166/58952 to 10.106.63.179/443 for TLS session
%ASA-7-725010: Device supports the following 20 cipher(s)
%ASA-7-725011: Cipher[1] : ECDHE-ECDSA-AES256-GCM-SHA384
%ASA-7-725011: Cipher[2] : ECDHE-RSA-AES256-GCM-SHA384
%ASA-7-725011: Cipher[3] : DHE-RSA-AES256-GCM-SHA384
%ASA-7-725011: Cipher[4] : AES256-GCM-SHA384
%ASA-7-725011: Cipher[5] : ECDHE-ECDSA-AES256-SHA384
%ASA-7-725011: Cipher[6] : ECDHE-RSA-AES256-SHA384
%ASA-7-725011: Cipher[7] : DHE-RSA-AES256-SHA256
%ASA-7-725011: Cipher[8] : AES256-SHA256
%ASA-7-725011: Cipher[9] : ECDHE-ECDSA-AES128-GCM-SHA256
%ASA-7-725011: Cipher[10] : ECDHE-RSA-AES128-GCM-SHA256
%ASA-7-725011: Cipher[11] : DHE-RSA-AES128-GCM-SHA256
%ASA-7-725011: Cipher[12] : AES128-GCM-SHA256
%ASA-7-725011: Cipher[13] : ECDHE-ECDSA-AES128-SHA256
%ASA-7-725011: Cipher[14] : ECDHE-RSA-AES128-SHA256
%ASA-7-725011: Cipher[15] : DHE-RSA-AES128-SHA256
%ASA-7-725011: Cipher[16] : AES128-SHA256
%ASA-7-725011: Cipher[17] : DHE-RSA-AES256-SHA
%ASA-7-725011: Cipher[18] : AES256-SHA
%ASA-7-725011: Cipher[19] : DHE-RSA-AES128-SHA
%ASA-7-725011: Cipher[20] : AES128-SHA
%ASA-7-725008: SSL client outside:10.106.44.166/58952 to 10.106.63.179/443 proposes the following 21 cipher(s)
%ASA-7-725011: Cipher[1] : ECDHE-RSA-AES256-GCM-SHA384
%ASA-7-725011: Cipher[2] : ECDHE-ECDSA-AES256-GCM-SHA384
%ASA-7-725011: Cipher[3] : ECDHE-RSA-AES256-SHA384
%ASA-7-725011: Cipher[4] : ECDHE-ECDSA-AES256-SHA384
%ASA-7-725011: Cipher[5] : DHE-RSA-AES256-GCM-SHA384
%ASA-7-725011: Cipher[6] : DHE-RSA-AES256-SHA256
%ASA-7-725011: Cipher[7] : DHE-RSA-AES256-SHA
%ASA-7-725011: Cipher[8] : AES256-GCM-SHA384
%ASA-7-725011: Cipher[9] : AES256-SHA256
%ASA-7-725011: Cipher[10] : AES256-SHA
%ASA-7-725011: Cipher[11] : ECDHE-RSA-AES128-GCM-SHA256
%ASA-7-725011: Cipher[12] : ECDHE-ECDSA-AES128-GCM-SHA256
%ASA-7-725011: Cipher[13] : ECDHE-RSA-AES128-SHA256
%ASA-7-725011: Cipher[14] : ECDHE-ECDSA-AES128-SHA256
%ASA-7-725011: Cipher[15] : DHE-RSA-AES128-GCM-SHA256
%ASA-7-725011: Cipher[16] : DHE-RSA-AES128-SHA256
%ASA-7-725011: Cipher[17] : DHE-RSA-AES128-SHA
%ASA-7-725011: Cipher[18] : AES128-GCM-SHA256
%ASA-7-725011: Cipher[19] : AES128-SHA256
%ASA-7-725011: Cipher[20] : AES128-SHA
%ASA-7-725011: Cipher[21] : DES-CBC3-SHA
%ASA-7-725012: Device chooses cipher ECDHE-RSA-AES256-GCM-SHA384 for the SSL session with client outside:10.106.44.166/58952 to 10.106.63.179/443
%ASA-6-725016: Device selects trust-point IDENTITY for client outside:10.106.44.166/58952 to 10.106.63.179/443
%ASA-7-725017: No certificates received during the handshake with client outside:10.106.44.166/58952 to 10.106.63.179/443 for DTLSv1 session
%ASA-6-725002: Device completed SSL handshake with client outside:10.106.44.166/58952 to 10.106.63.179/443 for TLSv1.2 session
%ASA-7-737035: IPAA: Session=0x0002f000, 'IPv4 address request' message queued
%ASA-7-737035: IPAA: Session=0x0002f000, 'IPv6 address request' message queued
%ASA-7-737001: IPAA: Session=0x0002f000, Received message 'IPv4 address request'
%ASA-5-737003: IPAA: Session=0x0002f000, DHCP configured, no viable servers found for tunnel-group 'ANYCONNECT_PROFILE'
%ASA-6-737026: IPAA: Session=0x0002f000, Client assigned 192.168.100.1 from local pool
%ASA-6-737006: IPAA: Session=0x0002f000, Local pool request succeeded for tunnel-group 'ANYCONNECT_PROFILE'
%ASA-7-737001: IPAA: Session=0x0002f000, Received message 'IPv6 address request'
%ASA-5-737034: IPAA: Session=0x0002f000, IPv6 address: no IPv6 address available from local pools
%ASA-5-737034: IPAA: Session=0x0002f000, IPv6 address: callback failed during IPv6 request
%ASA-4-722041: TunnelGroup <ANYCONNECT_PROFILE> GroupPolicy <GroupPolicy_ANYCONNECT-PROFILE> User <dimenet> IP <10.106.44.166> No IPv6 address available for SVC connection
%ASA-7-609001: Built local-host outside:192.168.100.1
%ASA-5-722033: Group <GroupPolicy_ANYCONNECT-PROFILE> User <dimenet> IP <10.106.44.166> First TCP SVC connection established for SVC session.
%ASA-6-722022: Group 
     
     
       User 
      
        IP <10.106.44.166> TCP SVC connection established without compression 
       
     
%ASA-7-746012: user-identity: Add IP-User mapping 192.168.100.1 - LOCAL\dimenet Succeeded - VPN user
%ASA-6-722055: Group <GroupPolicy_ANYCONNECT-PROFILE> User <dimenet> IP <10.106.44.166> Client Type: Cisco AnyConnect VPN Agent for Linux 4.6.03049
%ASA-4-722051: Group <GroupPolicy_ANYCONNECT-PROFILE> User <dimenet> IP <10.106.44.166> IPv4 Address <192.168.100.1> IPv6 address <::> assigned to session
%ASA-6-302015: Built inbound UDP connection 13543 for outside:10.106.44.166/42354 (10.106.44.166/42354) to identity:10.106.63.179/443 (10.106.63.179/443)
%ASA-6-725001: Starting SSL handshake with client outside:10.106.44.166/42354 to 10.106.63.179/443 for DTLS session
%ASA-7-609001: Built local-host outside:10.10.10.99
%ASA-6-302016: Teardown UDP connection 13544 for outside:192.168.100.1/60514(LOCAL\dimenet) to outside:10.10.10.99/53 duration 0:00:00 bytes 0 (dimenet)
%ASA-7-609002: Teardown local-host outside:10.10.10.99 duration 0:00:00
%ASA-6-302016: Teardown UDP connection 13543 for outside:10.106.44.166/42354 to identity:10.106.63.179/443 duration 0:00:00 bytes 147
%ASA-6-302015: Built inbound UDP connection 13545 for outside:10.106.44.166/42354 (10.106.44.166/42354) to identity:10.106.63.179/443 (10.106.63.179/443)
%ASA-6-725001: Starting SSL handshake with client outside:10.106.44.166/42354 to 10.106.63.179/443 for DTLS session
%ASA-6-725003: SSL client outside:10.106.44.166/42354 to 10.106.63.179/443 request to resume previous session
%ASA-6-725002: Device completed SSL handshake with client outside:10.106.44.166/42354 to 10.106.63.179/443 for DTLSv0.9 session
%ASA-5-722033: Group <GroupPolicy_ANYCONNECT-PROFILE> User <dimenet> IP <10.106.44.166> First UDP SVC connection established for SVC session.
%ASA-6-722022: Group <GroupPolicy_ANYCONNECT-PROFILE> User <dimenet> IP <10.106.44.166> UDP SVC connection established without compression
%ASA-6-725007: SSL session with client outside:10.106.44.166/58946 to 10.106.63.179/443 terminated
    • Para autenticação de certificado de cliente em um ASA

      debug crypto ca 255
      debug crypto ca messages 255
      debug crypto ca transactions 255

    Aqui está um exemplo de depuração realizada para uma autenticação de certificado de cliente bem-sucedida em um ASA:

    CERT_API: PKI session 0x05ba525b open Successful with type SSL
CERT_API: Authenticate session 0x05ba525b, non-blocking cb=0x00007f88839daf00
CERT API thread wakes up!
CERT_API: process msg cmd=0, session=0x05ba525b
CERT_API: Async locked for session 0x05ba525b

CRYPTO_PKI: Begin sorted cert chain
---------Certificate--------:
Serial:  640000004714E8BC85E51DBFC4000000000047
Subject: cn=dimenet,ou=HTTS,o=Cisco,l=SJ,st=CA,c=US
Issuer:  cn=SHERLOCK-CA,dc=calo,dc=lab

CRYPTO_PKI: End sorted cert chain
CRYPTO_PKI: Cert chain pre-processing: List size is 1, trustpool is not in use
CRYPTO_PKI: List pruning is not necessary.
CRYPTO_PKI: Sorted chain size is: 1
CRYPTO_PKI: Found ID cert. serial number: 640000004714E8BC85E51DBFC4000000000047, subject name: cn=dimenet,ou=HTTS,o=Cisco,l=SJ,st=CA,c=US
CRYPTO_PKI: Verifying certificate with serial number: 640000004714E8BC85E51DBFC4000000000047, subject name: cn=dimenet,ou=HTTS,o=Cisco,l=SJ,st=CA,c=US, issuer_name: cn=SHERLOCK-CA,dc=calo,dc=lab, signature alg: SHA256/RSA.

CRYPTO_PKI: Checking to see if an identical cert is
 already in the database...

CRYPTO_PKI(Cert Lookup) issuer="cn=SHERLOCK-CA,dc=calo,dc=lab" serial number=64 00 00 00 47 14 e8 bc 85 e5 1d bf c4 00 00 00    |  d...G...........
00 00 47                                           |  ..G

CRYPTO_PKI: looking for cert in handle=0x00007f8825ce6c90, digest=
9c 05 9b 71 14 9a 6b 35 35 9f f3 4f c5 eb d8 2a    |  ...q..k55..O...*

CRYPTO_PKI: Cert record not found, returning E_NOT_FOUND
CRYPTO_PKI: Cert not found in database. 

CRYPTO_PKI: Looking for suitable trustpoints for connection type SSL

CRYPTO_PKI: Found suitable tp: IDCERT
CRYPTO_PKI: Storage context locked by thread CERT API

CRYPTO_PKI: Found a suitable authenticated trustpoint IDCERT.
CRYPTO_PKI: ExtendedKeyUsage OID = 1.3.6.1.5.5.7.3.2 acceptable for usage type: SSL VPN Peer
CRYPTO_PKI:check_key_usage:Key Usage check OK

CRYPTO_PKI: Certificate validation: Successful, status: 0
CRYPTO_PKI: bypassing revocation checking based on policy configuration
CRYPTO_PKI:Certificate validated. serial number: 640000004714E8BC85E51DBFC4000000000047, subject name:  cn=dimenet,ou=HTTS,o=Cisco,l=SJ,st=CA,c=US.

CRYPTO_PKI: Storage context released by thread CERT API

CRYPTO_PKI: Certificate validated without revocation check

CRYPTO_PKI: valid cert with warning.

CRYPTO_PKI: valid cert status.
CERT_API: calling user callback=0x00007f88839daf00 with status=0(Success)
CERT_API: Close session 0x05ba525b asynchronously
CERT_API: Async unlocked for session 0x05ba525b
CERT_API: process msg cmd=1, session=0x05ba525b
CERT_API: Async locked for session 0x05ba525b
CERT_API: Async unlocked for session 0x05ba525b
CERT API thread sleeps!
    • Para o processo do AnyConnect em um cliente Linux

      Em um dispositivo Linux, os registros do AnyConnect podem ser encontrados no arquivo chamado syslog no caminho: /var/log/

    Aqui está um exemplo de registros de trabalho tirados de um cliente Linux. Esse comando pode ser executado para coletar logs dinâmicos de uma conexão de cliente AnyConnect:

    tactest:client$ tail -f /var/log/syslog
    Jul  1 08:42:48 machine acvpnui[11774]: An SSL VPN connection to bglanyconnect.cisco.com has been requested by the user.
Jul  1 08:42:48 machine acvpnui[11774]: Function: getProfileNameFromHost File: ../../vpn/Api/ProfileMgr.cpp Line: 1250 No profile available for host bglanyconnect.cisco.com.
Jul  1 08:42:48 machine acvpnui[11774]: Function: getHostInitSettings File: ../../vpn/Api/ProfileMgr.cpp Line: 1334 Profile () not found. Using default settings.
Jul  1 08:42:48 machine acvpnui[11774]: Function: loadProfiles File: ../../vpn/Api/ProfileMgr.cpp Line: 189 No profile is available.
Jul  1 08:42:48 machine acvpnui[11774]: Function: getProfileNameFromHost File: ../../vpn/Api/ProfileMgr.cpp Line: 1250 No profile available for host bglanyconnect.cisco.com.
Jul  1 08:42:48 machine acvpnui[11774]: Using default preferences. Some settings (e.g. certificate matching) may not function as expected if a local profile is expected to be used. Verify that the selected host is in the server list section of the profile and that the profile is configured on the secure gateway.
Jul  1 08:42:48 machine acvpnui[11774]: Function: setConnectionData File: ../../vpn/Api/ConnectMgr.cpp Line: 2015 Resetting certificate list.
Jul  1 08:42:48 machine acvpnui[11774]: Function: getProfileNameFromHost File: ../../vpn/Api/ProfileMgr.cpp Line: 1250 No profile available for host bglanyconnect.cisco.com.
Jul  1 08:42:48 machine acvpnui[11774]: Function: getHostInitSettings File: ../../vpn/Api/ProfileMgr.cpp Line: 1334 Profile () not found. Using default settings.
Jul  1 08:42:48 machine acvpnui[11774]: Function: getCertList File: ../../vpn/Api/ApiCert.cpp Line: 497 Number of certificates found: 1
Jul  1 08:42:48 machine acvpnui[11774]: Function: getProfileNameFromHost File: ../../vpn/Api/ProfileMgr.cpp Line: 1250 No profile available for host bglanyconnect.cisco.com.
Jul  1 08:42:48 machine acvpnui[11774]: Function: getHostInitSettings File: ../../vpn/Api/ProfileMgr.cpp Line: 1334 Profile () not found. Using default settings.
Jul  1 08:42:48 machine acvpnui[11774]: Function: setConnectionData File: ../../vpn/Api/ConnectMgr.cpp Line: 2148 Using certificate which matched stored preferences
Jul  1 08:42:48 machine acvpnui[11774]: Function: setConnectionData File: ../../vpn/Api/ConnectMgr.cpp Line: 2287 Certificate retrieved from preferences: Subject Name: C=US, ST=CA, L=SJ, O=Cisco, OU=HTTS, CN=dimenet Issuer Name : DC=lab, DC=calo, CN=SHERLOCK-CA Store : PEM File User
Jul  1 08:42:48 machine acvpnui[11774]: Message type information sent to the user: Contacting bglanyconnect.cisco.com.
Jul  1 08:42:48 machine acvpnui[11774]: Initiating VPN connection to the secure gateway https://bglanyconnect.cisco.com
Jul  1 08:42:48 machine acvpnagent[1785]: Using default preferences. Some settings (e.g. certificate matching) may not function as expected if a local profile is expected to be used. Verify that the selected host is in the server list section of the profile and that the profile is configured on the secure gateway.
Jul  1 08:42:48 machine acvpnagent[1785]: Function: processConnectNotification File: ../../vpn/Agent/MainThread.cpp Line: 13590 Received connect notification (host bglanyconnect.cisco.com, profile N/A)
Jul  1 08:42:48 machine acvpnagent[1785]: Function: getDnsConfiguration File: ../../vpn/Common/Utility/NetInterface_unix.cpp Line: 1247 Unable to get domain list for interface ens32.
Jul  1 08:42:48 machine acvpnagent[1785]: message repeated 2 times: [ Function: getDnsConfiguration File: ../../vpn/Common/Utility/NetInterface_unix.cpp Line: 1247 Unable to get domain list for interface ens32.]
Jul  1 08:42:48 machine acvpnagent[1785]: Function: resolveHostName File: ../../vpn/Common/Utility/HostLocator.cpp Line: 721 Invoked Function: CHostLocator::resolveHostNameAlt Return Code: -29229035 (0xFE420015) Description: DNSREQUEST_ERROR_EMPTY_RESPONSE
Jul  1 08:42:48 machine acvpnagent[1785]: Function: getHostIPAddrByName File: ../../vpn/Common/IPC/SocketSupport.cpp Line: 344 Invoked Function: ::getaddrinfo Return Code: 11 (0x0000000B) Description: unknown
Jul  1 08:42:48 machine acvpnagent[1785]: Function: resolveHostName File: ../../vpn/Common/Utility/HostLocator.cpp Line: 733 Invoked Function: CSocketSupport::getHostIPAddrByName Return Code: -31129588 (0xFE25000C) Description: SOCKETSUPPORT_ERROR_GETADDRINFO
Jul  1 08:42:48 machine acvpnagent[1785]: Function: ResolveHostname File: ../../vpn/Common/Utility/HostLocator.cpp Line: 843 Invoked Function: CHostLocator::resolveHostName Return Code: -31129588 (0xFE25000C) Description: SOCKETSUPPORT_ERROR_GETADDRINFO failed to resolve host name bglanyconnect.cisco.com to IPv6 address
Jul  1 08:42:48 machine acvpnagent[1785]: Function: logResolutionResult File: ../../vpn/Common/Utility/HostLocator.cpp Line: 927 Host bglanyconnect.cisco.com has been resolved to IP address 10.106.63.179
Jul  1 08:42:48 machine acvpnagent[1785]: Writing to hosts file:  10.106.63.179#011bglanyconnect.cisco.com ###Cisco AnyConnect VPN client modified this file. Please do not modify contents until this comment is removed.
Jul  1 08:42:48 machine acvpnagent[1785]: Function: respondToConnectNotification File: ../../vpn/Agent/MainThread.cpp Line: 5831 The requested VPN connection to bglanyconnect.cisco.com will target the following IP protocols and addresses: primary - IPv4 (address 10.106.63.179), secondary - N/A.
Jul  1 08:42:48 machine acvpnagent[1785]: Function: determineAcidexMacAddrMapForTlv File: ../../vpn/Agent/MainThread.cpp Line: 6143 [ACIDEX] Determined public interface MAC address 00-50-56-bd-87-1f (interface IPv4 address: 10.106.44.166)
Jul  1 08:42:48 machine acvpnui[11774]: Function: getUserName File: ../../vpn/Api/CTransportCurlStatic.cpp Line: 2249 PasswordEntry username is tactest
Jul  1 08:42:48 machine acvpnui[11774]: Function: findProfile File: ../../vpn/CommonCrypt/Certificates/NSSCertUtils.cpp Line: 666 NSS Profile directory: /home/tactest/.mozilla/firefox/6ai2dwqd.default
Jul  1 08:42:48 machine acvpnui[11774]: Function: InitNSS File: ../../vpn/CommonCrypt/Certificates/NSSCertUtils.cpp Line: 408 Invoked Function: NSS_Initialize Return Code: -8015 (0xFFFFE0B1) Description: unknown Unknown
Jul  1 08:42:48 machine acvpnui[11774]: Function: CNSSCertStore File: ../../vpn/CommonCrypt/Certificates/NSSCertStore.cpp Line: 76 Invoked Function: CNSSCertUtils::InitNSS Return Code: -31457269 (0xFE20000B) Description: CERTSTORE_ERROR_PROVIDER_ERROR
Jul  1 08:42:48 machine acvpnui[11774]: Function: addNSSStore File: ../../vpn/CommonCrypt/Certificates/CollectiveCertStore.cpp Line: 1874 Invoked Function: CNSSCertStore::CNSSCertStore Return Code: -31457269 (0xFE20000B) Description: CERTSTORE_ERROR_PROVIDER_ERROR
Jul  1 08:42:48 machine acvpnui[11774]: Function: OpenStores File: ../../vpn/CommonCrypt/Certificates/CollectiveCertStore.cpp Line: 449 Invoked Function: CCollectiveCertStore::addNSSStore Return Code: -31457269 (0xFE20000B) Description: CERTSTORE_ERROR_PROVIDER_ERROR
Jul  1 08:42:48 machine acvpnui[11774]: Function: verify_callback File: ../../vpn/CommonCrypt/Certificates/FileCertificate.cpp Line: 417 Invoked Function: X509_verify_cert Return Code: 0 (0x00000000) Description: ok
Jul  1 08:42:48 machine acvpnui[11774]: Function: verify_callback File: ../../vpn/CommonCrypt/Certificates/FileCertificate.cpp Line: 417 Invoked Function: X509_verify_cert Return Code: 0 (0x00000000) Description: ok
Jul  1 08:42:48 machine acvpnui[11774]: Function: PeerCertVerifyCB File: ../../vpn/Api/CTransportCurlStatic.cpp Line: 959 Return success from VerifyServerCertificate
Jul  1 08:42:48 machine acvpnui[11774]: Function: processResponseStringFromSG File: ../../vpn/Api/ConnectMgr.cpp Line: 11991 Client certificate requested by peer (via AggAuth)
Jul  1 08:42:48 machine acvpnui[11774]: Function: getUserName File: ../../vpn/Api/CTransportCurlStatic.cpp Line: 2249 PasswordEntry username is tactest
Jul  1 08:42:48 machine acvpnui[11774]: Function: findProfile File: ../../vpn/CommonCrypt/Certificates/NSSCertUtils.cpp Line: 666 NSS Profile directory: /home/tactest/.mozilla/firefox/6ai2dwqd.default
Jul  1 08:42:48 machine acvpnui[11774]: Function: InitNSS File: ../../vpn/CommonCrypt/Certificates/NSSCertUtils.cpp Line: 408 Invoked Function: NSS_Initialize Return Code: -8015 (0xFFFFE0B1) Description: unknown Unknown
Jul  1 08:42:48 machine acvpnui[11774]: Function: CNSSCertStore File: ../../vpn/CommonCrypt/Certificates/NSSCertStore.cpp Line: 76 Invoked Function: CNSSCertUtils::InitNSS Return Code: -31457269 (0xFE20000B) Description: CERTSTORE_ERROR_PROVIDER_ERROR
Jul  1 08:42:48 machine acvpnui[11774]: Function: addNSSStore File: ../../vpn/CommonCrypt/Certificates/CollectiveCertStore.cpp Line: 1874 Invoked Function: CNSSCertStore::CNSSCertStore Return Code: -31457269 (0xFE20000B) Description: CERTSTORE_ERROR_PROVIDER_ERROR
Jul  1 08:42:48 machine acvpnui[11774]: Function: OpenStores File: ../../vpn/CommonCrypt/Certificates/CollectiveCertStore.cpp Line: 449 Invoked Function: CCollectiveCertStore::addNSSStore Return Code: -31457269 (0xFE20000B) Description: CERTSTORE_ERROR_PROVIDER_ERROR
Jul  1 08:42:48 machine acvpnui[11774]: Function: verify_callback File: ../../vpn/CommonCrypt/Certificates/FileCertificate.cpp Line: 417 Invoked Function: X509_verify_cert Return Code: 0 (0x00000000) Description: ok
Jul  1 08:42:48 machine acvpnui[11774]: Function: verify_callback File: ../../vpn/CommonCrypt/Certificates/FileCertificate.cpp Line: 417 Invoked Function: X509_verify_cert Return Code: 0 (0x00000000) Description: ok
Jul  1 08:42:48 machine acvpnui[11774]: Function: PeerCertVerifyCB File: ../../vpn/Api/CTransportCurlStatic.cpp Line: 959 Return success from VerifyServerCertificate
Jul  1 08:42:48 machine acvpnui[11774]: Function: ClientCertSetCB File: ../../vpn/Api/CTransportCurlStatic.cpp Line: 1063 Client certificate requested by peer
Jul  1 08:42:48 machine acvpnui[11774]: Function: getUserName File: ../../vpn/Api/CTransportCurlStatic.cpp Line: 2249 PasswordEntry username is tactest
Jul  1 08:42:48 machine acvpnui[11774]: Function: findProfile File: ../../vpn/CommonCrypt/Certificates/NSSCertUtils.cpp Line: 666 NSS Profile directory: /home/tactest/.mozilla/firefox/6ai2dwqd.default
Jul  1 08:42:48 machine acvpnui[11774]: Function: InitNSS File: ../../vpn/CommonCrypt/Certificates/NSSCertUtils.cpp Line: 408 Invoked Function: NSS_Initialize Return Code: -8015 (0xFFFFE0B1) Description: unknown Unknown
Jul  1 08:42:48 machine acvpnui[11774]: Function: CNSSCertStore File: ../../vpn/CommonCrypt/Certificates/NSSCertStore.cpp Line: 76 Invoked Function: CNSSCertUtils::InitNSS Return Code: -31457269 (0xFE20000B) Description: CERTSTORE_ERROR_PROVIDER_ERROR
Jul  1 08:42:48 machine acvpnui[11774]: Function: addNSSStore File: ../../vpn/CommonCrypt/Certificates/CollectiveCertStore.cpp Line: 1874 Invoked Function: CNSSCertStore::CNSSCertStore Return Code: -31457269 (0xFE20000B) Description: CERTSTORE_ERROR_PROVIDER_ERROR
Jul  1 08:42:48 machine acvpnui[11774]: Function: OpenStores File: ../../vpn/CommonCrypt/Certificates/CollectiveCertStore.cpp Line: 449 Invoked Function: CCollectiveCertStore::addNSSStore Return Code: -31457269 (0xFE20000B) Description: CERTSTORE_ERROR_PROVIDER_ERROR
Jul  1 08:42:48 machine acvpnui[11774]: Function: GetCertChain File: ../../vpn/CommonCrypt/Certificates/FileCertStore.cpp Line: 618 Invoked Function: enumerateCert Return Code: -31457266 (0xFE20000E) Description: CERTSTORE_ERROR_CERT_NOT_FOUND
Jul  1 08:42:48 machine acvpnui[11774]: Function: ProcessPromptData File: ../../vpn/Api/SDIMgr.cpp Line: 336 Authentication is not token based (OTP).
Jul  1 08:42:48 machine acvpnui[11774]: Function: getProfileNameFromHost File: ../../vpn/Api/ProfileMgr.cpp Line: 1250 No profile available for host bglanyconnect.cisco.com.
Jul  1 08:42:48 machine acvpnui[11774]: Function: getHostInitSettings File: ../../vpn/Api/ProfileMgr.cpp Line: 1334 Profile () not found. Using default settings.
Jul  1 08:42:48 machine acvpnui[11774]: Message type prompt sent to the user: Your client certificate will be used for authentication
Jul  1 08:42:50 machine acvpnui[11774]: Function: userResponse File: ../../vpn/Api/ConnectMgr.cpp Line: 1606 Processing user response.
Jul  1 08:42:50 machine acvpnui[11774]: Function: processIfcData File: ../../vpn/Api/ConnectMgr.cpp Line: 3650 Authentication succeeded
Jul  1 08:42:50 machine acvpnui[11774]: VPN state: Connecting Network state: Network Accessible Network control state: Network Access: Available Network type: Undefined
Jul  1 08:42:50 machine acvpnui[11774]: Message type information sent to the user: Establishing VPN session...
Jul  1 08:42:50 machine acvpnui[11774]: Function: getProfileConfiguredOnSG File: ../../vpn/Api/ConnectMgr.cpp Line: 10896 VPN Profile Manifest entry not present
Jul  1 08:42:50 machine acvpnui[11774]: Function: initiateTunnel File: ../../vpn/Api/ConnectMgr.cpp Line: 11279 Invoked Function: ConnectMgr::getProfileConfiguredOnSG Return Code: -29556727 (0xFE3D0009) Description: CONNECTMGR_ERROR_UNEXPECTED
Jul  1 08:42:50 machine acvpnui[11774]: Function: launchCachedDownloader File: ../../vpn/Api/ConnectMgr.cpp Line: 8228 Launching Cached Downloader: path: '/opt/cisco/anyconnect/bin/vpndownloader' cmd:  '"-ipc#011gc#011-cd"'
Jul  1 08:42:50 machine acvpnui[11774]: Function: IsValid File: ../../vpn/CommonCrypt/VerifyFileSignatureOpenSSL.cpp Line: 280 Not validating original name for file (/opt/cisco/anyconnect/bin/vpndownloader)
Jul  1 08:42:50 machine acvpnui[11774]: Function: findProfile File: ../../vpn/CommonCrypt/Certificates/NSSCertUtils.cpp Line: 666 NSS Profile directory: /home/tactest/.mozilla/firefox/6ai2dwqd.default
Jul  1 08:42:50 machine acvpnui[11774]: Function: InitNSS File: ../../vpn/CommonCrypt/Certificates/NSSCertUtils.cpp Line: 408 Invoked Function: NSS_Initialize Return Code: -8015 (0xFFFFE0B1) Description: unknown Unknown
Jul  1 08:42:50 machine acvpnui[11774]: Function: CNSSCertStore File: ../../vpn/CommonCrypt/Certificates/NSSCertStore.cpp Line: 76 Invoked Function: CNSSCertUtils::InitNSS Return Code: -31457269 (0xFE20000B) Description: CERTSTORE_ERROR_PROVIDER_ERROR
Jul  1 08:42:50 machine acvpnui[11774]: Function: addNSSStore File: ../../vpn/CommonCrypt/Certificates/CollectiveCertStore.cpp Line: 1874 Invoked Function: CNSSCertStore::CNSSCertStore Return Code: -31457269 (0xFE20000B) Description: CERTSTORE_ERROR_PROVIDER_ERROR
Jul  1 08:42:50 machine acvpnui[11774]: Function: OpenStores File: ../../vpn/CommonCrypt/Certificates/CollectiveCertStore.cpp Line: 449 Invoked Function: CCollectiveCertStore::addNSSStore Return Code: -31457269 (0xFE20000B) Description: CERTSTORE_ERROR_PROVIDER_ERROR
Jul  1 08:42:50 machine acvpnui[11774]: Function: verify_callback File: ../../vpn/CommonCrypt/Certificates/FileCertificate.cpp Line: 417 Invoked Function: X509_verify_cert Return Code: 0 (0x00000000) Description: ok
Jul  1 08:42:50 machine acvpnui[11774]: message repeated 2 times: [ Function: verify_callback File: ../../vpn/CommonCrypt/Certificates/FileCertificate.cpp Line: 417 Invoked Function: X509_verify_cert Return Code: 0 (0x00000000) Description: ok]
Jul  1 08:42:50 machine acvpnui[11774]: Server certificate validation was successful
Jul  1 08:42:50 machine acvpnui[11774]: Function: launchCachedDownloader File: ../../vpn/Api/ConnectMgr.cpp Line: 8247 Invoked Function: ConnectMgr::launchCachedDownloader Return Code: 0 (0x00000000) Description: Successfully launched the cached downloader
Jul  1 08:42:50 machine acvpndownloader[13609]: Cisco AnyConnect Secure Mobility Client Downloader (VPN) started, version 4.6.03049
Jul  1 08:42:50 machine acvpndownloader[13609]: Function: handleInvalidPid File: ../../vpn/Common/FirstInstance.cpp Line: 524 PID file does not exist.
Jul  1 08:42:50 machine acvpndownloader[13609]: Function: init File: ../../vpn/Common/i18n/MsgCatalog.cpp Line: 373 initialized catalog: AnyConnect with locale:
Jul  1 08:42:50 machine acvpndownloader[13609]: Function: loadProfiles File: ../../vpn/Api/ProfileMgr.cpp Line: 189 No profile is available.
Jul  1 08:42:50 machine acvpndownloader[13609]: Function: invokePreferenceUpdateCBs File: ../../vpn/Api/PreferenceMgr.cpp Line: 1512 Callback interface address is NULL.
Jul  1 08:42:50 machine acvpndownloader[13609]: Current Preference Settings: ServiceDisable: false ShowPreConnectMessage: false AutoConnectOnStart: false MinimizeOnConnect: true LocalLanAccess: false DisableCaptivePortalDetection: false AutoReconnect: true AutoUpdate: true ProxySettings: Native AllowLocalProxyConnections: true PPPExclusion: Disable PPPExclusionServerIP:  AutomaticVPNPolicy: false TrustedNetworkPolicy: Disconnect UntrustedNetworkPolicy: Connect TrustedDNSDomains:  TrustedDNSServers:  TrustedHttpsServerList:  EnableScripting: false TerminateScriptOnNextEvent: false EnableAutomaticServerSelection: false AuthenticationTimeout: 12 IPProtocolSupport: IPv4,IPv6 AllowManualHostInput: true BlockUntrustedServers: false PublicProxyServerAddress:  CertificatePinning: false
Jul  1 08:42:50 machine acvpndownloader[13609]: The AnyConnect Downloader is performing update checks...
Jul  1 08:42:50 machine acvpnui[11774]: Message type information sent to the user: The AnyConnect Downloader is performing update checks...
Jul  1 08:42:50 machine acvpnui[11774]: Function: processDnldrArgsRequest File: ../../vpn/Api/ConnectMgr.cpp Line: 15162 Determine proxy: false
Jul  1 08:42:50 machine acvpnui[11774]: Function: findProfile File: ../../vpn/CommonCrypt/Certificates/NSSCertUtils.cpp Line: 666 NSS Profile directory: /home/tactest/.mozilla/firefox/6ai2dwqd.default
Jul  1 08:42:50 machine acvpnui[11774]: Function: InitNSS File: ../../vpn/CommonCrypt/Certificates/NSSCertUtils.cpp Line: 408 Invoked Function: NSS_Initialize Return Code: -8015 (0xFFFFE0B1) Description: unknown Unknown
Jul  1 08:42:50 machine acvpnui[11774]: Function: CNSSCertStore File: ../../vpn/CommonCrypt/Certificates/NSSCertStore.cpp Line: 76 Invoked Function: CNSSCertUtils::InitNSS Return Code: -31457269 (0xFE20000B) Description: CERTSTORE_ERROR_PROVIDER_ERROR
Jul  1 08:42:50 machine acvpnui[11774]: Function: addNSSStore File: ../../vpn/CommonCrypt/Certificates/CollectiveCertStore.cpp Line: 1874 Invoked Function: CNSSCertStore::CNSSCertStore Return Code: -31457269 (0xFE20000B) Description: CERTSTORE_ERROR_PROVIDER_ERROR
Jul  1 08:42:50 machine acvpnui[11774]: Function: OpenStores File: ../../vpn/CommonCrypt/Certificates/CollectiveCertStore.cpp Line: 449 Invoked Function: CCollectiveCertStore::addNSSStore Return Code: -31457269 (0xFE20000B) Description: CERTSTORE_ERROR_PROVIDER_ERROR
Jul  1 08:42:50 machine acvpnui[11774]: Function: GetCertChain File: ../../vpn/CommonCrypt/Certificates/FileCertStore.cpp Line: 618 Invoked Function: enumerateCert Return Code: -31457266 (0xFE20000E) Description: CERTSTORE_ERROR_CERT_NOT_FOUND
Jul  1 08:42:50 machine acvpndownloader[13609]: Function: getManifestFromConfigXml File: ../../../vpn/Downloader/DownloaderArgs.cpp Line: 657 Language manifest not present
Jul  1 08:42:50 machine acvpndownloader[13609]: Function: getManifestFromConfigXml File: ../../../vpn/Downloader/DownloaderArgs.cpp Line: 666 Customization manifest not present
Jul  1 08:42:50 machine acvpndownloader[13609]: Function: getManifestFromConfigXml File: ../../../vpn/Downloader/DownloaderArgs.cpp Line: 675 Profile manifest not present
Jul  1 08:42:50 machine acvpndownloader[13609]: Function: parseBaseConfig File: ../../../vpn/Downloader/DownloaderArgs.cpp Line: 872 No optional modules in aggregate config xml.
Jul  1 08:42:50 machine acvpndownloader[13609]: Function: parseMiscInfo File: ../../../vpn/Downloader/DownloaderArgs.cpp Line: 898 VPN Profile Manifest entry not present
Jul  1 08:42:50 machine acvpndownloader[13609]: Function: parseCustomAttributes File: ../../../vpn/Downloader/DownloaderArgs.cpp Line: 937 Custom attribute entry not present
Jul  1 08:42:50 machine acvpndownloader[13609]: Function: setHostnameAndPort File: ../../../vpn/Downloader/DownloaderArgs.cpp Line: 545 Defaulting to port 443
Jul  1 08:42:50 machine acvpndownloader[13609]: Connecting to bglanyconnect.cisco.com.
Jul  1 08:42:50 machine acvpndownloader[13609]: Authorized Server List is not defined in local policy. Treating bglanyconnect.cisco.com as authorized. Any configured local policy software and profile locks do not apply.
Jul  1 08:42:50 machine acvpndownloader[13609]: Checking for profile updates...
Jul  1 08:42:50 machine acvpndownloader[13609]: Checking for product updates...
Jul  1 08:42:50 machine acvpnui[11774]: Message type information sent to the user: Checking for profile updates...
Jul  1 08:42:50 machine acvpndownloader[13609]: Skipping update of AnyConnect Secure Mobility Client 4.6.03049 because an up-to-date version is already installed.
Jul  1 08:42:50 machine acvpndownloader[13609]: Skipping update of AnyConnect DART 4.6.03049 because an up-to-date version is already installed.
Jul  1 08:42:50 machine acvpndownloader[13609]: Checking for customization updates...
Jul  1 08:42:50 machine acvpndownloader[13609]: Performing any required updates...
Jul  1 08:42:50 machine acvpndownloader[13609]: The AnyConnect Downloader updates have been completed.
Jul  1 08:42:50 machine acvpnagent[1785]: Function: OnIpcMessageReceived File: ../../vpn/Common/IPC/IPCDepot.cpp Line: 1115 Invoked Function: CIpcTransport::OnSocketReadComplete Return Code: -33292279 (0xFE040009) Description: IPCTRANSPORT_ERROR_UNEXPECTED
Jul  1 08:42:50 machine acvpndownloader[13609]: Function: Serialize File: ../../vpn/Common/TLV/CertificateInfoTlv.cpp Line: 799 Data to serialize is empty
Jul  1 08:42:50 machine acvpndownloader[13609]: Function: Assign File: ../../vpn/Common/TLV/CertificateInfoTlv.cpp Line: 87 Invoked Function: CCertificateInfoTlv::Serialize Return Code: -21954549 (0xFEB1000B) Description: CERTIFICATEINFO_ERROR_NO_DATA:No certificate data was found
Jul  1 08:42:50 machine acvpndownloader[13609]: Function: GetAggAuthCertificateInfo File: ../../../vpn/Downloader/DownloaderArgs.cpp Line: 1828 Invoked Function: CCertificateInfoTlv::Assign Return Code: -21954549 (0xFEB1000B) Description: CERTIFICATEINFO_ERROR_NO_DATA:No certificate data was found
Jul  1 08:42:50 machine acvpnagent[1785]: Function: GetAggAuthCertificateInfo File: ../../vpn/Common/TLV/startparameters.cpp Line: 1365 Invoked Function: CStartParameters::GetInfoByType Return Code: -32440304 (0xFE110010) Description: TLV_ERROR_NO_ATTRIBUTE
Jul  1 08:42:50 machine acvpnagent[1785]: Tunnel initiated by GUI Client.
Jul  1 08:42:50 machine acvpnagent[1785]: Using default preferences. Some settings (e.g. certificate matching) may not function as expected if a local profile is expected to be used. Verify that the selected host is in the server list section of the profile and that the profile is configured on the secure gateway.
Jul  1 08:42:50 machine acvpnagent[1785]: Function: GetAggAuthCertificateInfo File: ../../vpn/Common/TLV/startparameters.cpp Line: 1365 Invoked Function: CStartParameters::GetInfoByType Return Code: -32440304 (0xFE110010) Description: TLV_ERROR_NO_ATTRIBUTE
Jul  1 08:42:50 machine acvpnagent[1785]: Function: Serialize File: ../../vpn/Common/TLV/CertificateInfoTlv.cpp Line: 799 Data to serialize is empty
Jul  1 08:42:50 machine acvpnagent[1785]: Function: Assign File: ../../vpn/Common/TLV/CertificateInfoTlv.cpp Line: 87 Invoked Function: CCertificateInfoTlv::Serialize Return Code: -21954549 (0xFEB1000B) Description: CERTIFICATEINFO_ERROR_NO_DATA:No certificate data was found
Jul  1 08:42:50 machine acvpnagent[1785]: Function: SetAggAuthCertificateInfo File: ../../vpn/AgentUtilities/vpnparam.cpp Line: 1165 Invoked Function: CCertificateInfoTlv::Assign Return Code: -21954549 (0xFEB1000B) Description: CERTIFICATEINFO_ERROR_NO_DATA:No certificate data was found
Jul  1 08:42:50 machine acvpnagent[1785]: Secure Gateway Parameters:  Primary IP Address: 10.106.63.179  Secondary IP Address: N/A  Domain name: bglanyconnect.cisco.com  Port: 443  URL: "https://bglanyconnect.cisco.com:443/CACHE/stc/2/"  Auth method: SSL  Proxy Server: ""
Jul  1 08:42:50 machine acvpnagent[1785]: Initiating Cisco AnyConnect Secure Mobility Client connection, version 4.6.03049
Jul  1 08:42:50 machine acvpnagent[1785]: Function: OnTunnelStateChange File: ../../vpn/Agent/TND.cpp Line: 2030 tunnel state change notification (new 0, old 4)
Jul  1 08:42:50 machine acvpnagent[1785]: Function: STLoadLibrary File: ../../vpn/Common/Utility/Win/HModuleMgr.cpp Line: 148 Invoked Function: dlopen Return Code: 0 (0x00000000) Description: libz.so: cannot open shared object file: No such file or directory
Jul  1 08:42:50 machine acvpnagent[1785]: Function: LoadLibrary File: ../../vpn/Agent/CZLib.cpp Line: 246 Invoked Function: CHModuleMgr::STLoadLibrary Return Code: -33554425 (0xFE000007) Description: GLOBAL_ERROR_NOT_INITIALIZED
Jul  1 08:42:50 machine acvpnagent[1785]: Function: CCstpProtocol File: ../../vpn/Agent/CstpProtocol.cpp Line: 327 Invoked Function: CZLib Return Code: -31981557 (0xFE18000B) Description: CZLIB_ERROR_LOAD_LIBRARY
Jul  1 08:42:50 machine acvpnagent[1785]: Function: findProfile File: ../../vpn/CommonCrypt/Certificates/NSSCertUtils.cpp Line: 666 NSS Profile directory: /home/tactest/.mozilla/firefox/6ai2dwqd.default
Jul  1 08:42:50 machine acvpnagent[1785]: Function: InitNSS File: ../../vpn/CommonCrypt/Certificates/NSSCertUtils.cpp Line: 408 Invoked Function: NSS_Initialize Return Code: -8015 (0xFFFFE0B1) Description: unknown Unknown
Jul  1 08:42:50 machine acvpnagent[1785]: Function: CNSSCertStore File: ../../vpn/CommonCrypt/Certificates/NSSCertStore.cpp Line: 76 Invoked Function: CNSSCertUtils::InitNSS Return Code: -31457269 (0xFE20000B) Description: CERTSTORE_ERROR_PROVIDER_ERROR
Jul  1 08:42:50 machine acvpnagent[1785]: Function: addNSSStore File: ../../vpn/CommonCrypt/Certificates/CollectiveCertStore.cpp Line: 1874 Invoked Function: CNSSCertStore::CNSSCertStore Return Code: -31457269 (0xFE20000B) Description: CERTSTORE_ERROR_PROVIDER_ERROR
Jul  1 08:42:50 machine acvpnagent[1785]: Function: OpenStores File: ../../vpn/CommonCrypt/Certificates/CollectiveCertStore.cpp Line: 449 Invoked Function: CCollectiveCertStore::addNSSStore Return Code: -31457269 (0xFE20000B) Description: CERTSTORE_ERROR_PROVIDER_ERROR
Jul  1 08:42:50 machine acvpnagent[1785]: The Primary SSL connection to the secure gateway is being established.
Jul  1 08:42:50 machine acvpnagent[1785]: Function: OnTunnelStateChange File: ../../vpn/Agent/TND.cpp Line: 2030 tunnel state change notification (new 0, old 0)
Jul  1 08:42:50 machine acvpnagent[1785]: Function: postSocketConnectProcessing File: ../../vpn/Agent/SslTunnelTransport.cpp Line: 1421 Opened SSL socket from [10.106.44.166]:58980 to [10.106.63.179]:443
Jul  1 08:42:50 machine NetworkManager[940]: <info>  [1561984970.2702] manager: (cscotun0): new Tun device (/org/freedesktop/NetworkManager/Devices/16)
Jul  1 08:42:50 machine NetworkManager[940]: <info>  [1561984970.2730] devices added (path: /sys/devices/virtual/net/cscotun0, iface: cscotun0)
Jul  1 08:42:50 machine NetworkManager[940]: <info>  [1561984970.2730] device added (path: /sys/devices/virtual/net/cscotun0, iface: cscotun0): no ifupdown configuration found.
Jul  1 08:42:50 machine acvpnagent[13620]: Function: findProfile File: ../../vpn/CommonCrypt/Certificates/NSSCertUtils.cpp Line: 666 NSS Profile directory: /home/tactest/.mozilla/firefox/6ai2dwqd.default
Jul  1 08:42:50 machine acvpnagent[13620]: Function: InitNSS File: ../../vpn/CommonCrypt/Certificates/NSSCertUtils.cpp Line: 408 Invoked Function: NSS_Initialize Return Code: -8015 (0xFFFFE0B1) Description: unknown Unknown
Jul  1 08:42:50 machine acvpnagent[13620]: Function: CNSSCertStore File: ../../vpn/CommonCrypt/Certificates/NSSCertStore.cpp Line: 76 Invoked Function: CNSSCertUtils::InitNSS Return Code: -31457269 (0xFE20000B) Description: CERTSTORE_ERROR_PROVIDER_ERROR
Jul  1 08:42:50 machine acvpnagent[13620]: Function: addNSSStore File: ../../vpn/CommonCrypt/Certificates/CollectiveCertStore.cpp Line: 1874 Invoked Function: CNSSCertStore::CNSSCertStore Return Code: -31457269 (0xFE20000B) Description: CERTSTORE_ERROR_PROVIDER_ERROR
Jul  1 08:42:50 machine acvpnagent[13620]: Function: OpenStores File: ../../vpn/CommonCrypt/Certificates/CollectiveCertStore.cpp Line: 449 Invoked Function: CCollectiveCertStore::addNSSStore Return Code: -31457269 (0xFE20000B) Description: CERTSTORE_ERROR_PROVIDER_ERROR
Jul  1 08:42:50 machine acvpnagent[13620]: Function: findProfile File: ../../vpn/CommonCrypt/Certificates/NSSCertUtils.cpp Line: 666 NSS Profile directory: /home/tactest/.mozilla/firefox/6ai2dwqd.default
Jul  1 08:42:50 machine acvpnagent[13620]: Function: InitNSS File: ../../vpn/CommonCrypt/Certificates/NSSCertUtils.cpp Line: 408 Invoked Function: NSS_Initialize Return Code: -8015 (0xFFFFE0B1) Description: unknown Unknown
Jul  1 08:42:50 machine acvpnagent[13620]: Function: CNSSCertStore File: ../../vpn/CommonCrypt/Certificates/NSSCertStore.cpp Line: 76 Invoked Function: CNSSCertUtils::InitNSS Return Code: -31457269 (0xFE20000B) Description: CERTSTORE_ERROR_PROVIDER_ERROR
Jul  1 08:42:50 machine acvpnagent[13620]: Function: addNSSStore File: ../../vpn/CommonCrypt/Certificates/CollectiveCertStore.cpp Line: 1874 Invoked Function: CNSSCertStore::CNSSCertStore Return Code: -31457269 (0xFE20000B) Description: CERTSTORE_ERROR_PROVIDER_ERROR
Jul  1 08:42:50 machine acvpnagent[13620]: Function: OpenStores File: ../../vpn/CommonCrypt/Certificates/CollectiveCertStore.cpp Line: 449 Invoked Function: CCollectiveCertStore::addNSSStore Return Code: -31457269 (0xFE20000B) Description: CERTSTORE_ERROR_PROVIDER_ERROR
Jul  1 08:42:50 machine acvpnagent[13620]: Function: init File: ../../vpn/Common/i18n/MsgCatalog.cpp Line: 373 initialized catalog: AnyConnect with locale:
Jul  1 08:42:50 machine acvpnagent[13620]: Function: loadProfiles File: ../../vpn/Api/ProfileMgr.cpp Line: 189 No profile is available.
Jul  1 08:42:50 machine acvpnagent[13620]: Function: invokePreferenceUpdateCBs File: ../../vpn/Api/PreferenceMgr.cpp Line: 1512 Callback interface address is NULL.
Jul  1 08:42:50 machine acvpnagent[13620]: Current Preference Settings: ServiceDisable: false ShowPreConnectMessage: false AutoConnectOnStart: false MinimizeOnConnect: true LocalLanAccess: false DisableCaptivePortalDetection: false AutoReconnect: true AutoUpdate: true ProxySettings: Native AllowLocalProxyConnections: true PPPExclusion: Disable PPPExclusionServerIP:  AutomaticVPNPolicy: false TrustedNetworkPolicy: Disconnect UntrustedNetworkPolicy: Connect TrustedDNSDomains:  TrustedDNSServers:  TrustedHttpsServerList:  EnableScripting: false TerminateScriptOnNextEvent: false EnableAutomaticServerSelection: false AuthenticationTimeout: 12 IPProtocolSupport: IPv4,IPv6 AllowManualHostInput: true BlockUntrustedServers: false PublicProxyServerAddress:  CertificatePinning: false
Jul  1 08:42:50 machine acvpnagent[13620]: Using default preferences. Some settings (e.g. certificate matching) may not function as expected if a local profile is expected to be used. Verify that the selected host is in the server list section of the profile and that the profile is configured on the secure gateway.
Jul  1 08:42:50 machine acvpnagent[13620]: Function: GetCertificatePins File: ../../vpn/Api/PreferenceMgr.cpp Line: 1795 Invoked Function: ProfileMgr::GetProfileNameFromAddress Return Code: -26083317 (0xFE72000B) Description: PROFILEMGR_ERROR_HOST_ADDRESS_NOT_FOUND_IN_ANY_PROFILE Server address bglanyconnect.cisco.com not found in any profile.
Jul  1 08:42:50 machine acvpnagent[13620]: Function: verify_callback File: ../../vpn/CommonCrypt/Certificates/FileCertificate.cpp Line: 417 Invoked Function: X509_verify_cert Return Code: 0 (0x00000000) Description: ok
Jul  1 08:42:50 machine acvpnagent[13620]: Function: verify_callback File: ../../vpn/CommonCrypt/Certificates/FileCertificate.cpp Line: 417 Invoked Function: X509_verify_cert Return Code: 0 (0x00000000) Description: ok
Jul  1 08:42:50 machine acvpnagent[1785]: Function: verifyServerCertificate File: ../../vpn/Agent/CertOpenSSLAdapter.cpp Line: 834 certificate confirmation reason=0x0
Jul  1 08:42:50 machine acvpnagent[1785]: A SSL connection has been established using cipher ECDHE-RSA-AES256-GCM-SHA384
Jul  1 08:42:50 machine acvpnagent[1785]: Function: calculateTunnelMTU File: ../../vpn/Agent/CstpProtocol.cpp Line: 2846 The candidate MTU (1399) is derived from the physical interface MTU.
Jul  1 08:42:50 machine acvpnagent[1785]: Function: startHTTPNegotiation File: ../../vpn/Agent/CstpProtocol.cpp Line: 1018 Proposed base MTU is 1500.
Jul  1 08:42:50 machine acvpnagent[1785]: Current Profile: none Received VPN Session Configuration Settings:  Keep Installed: enabled  Rekey Method: disabled  Proxy Setting: do not modify  Proxy Server: none  Proxy PAC URL: none  Proxy Exceptions: none  Proxy Lockdown: enabled  IPv4 Split Exclude: disabled  IPv6 Split Exclude: disabled  IPv4 Dynamic Split Exclude: disabled  IPv6 Dynamic Split Exclude: disabled  IPv4 Split Include: 1 IPv4 private networks  IPv6 Split Include: disabled  IPv4 Dynamic Split Include: disabled  IPv6 Dynamic Split Include: disabled  IPv4 Split DNS: disabled  IPv6 Split DNS: disabled  Tunnel all DNS: disabled  IPv4 Local LAN Wildcard: local LAN access preference is disabled  IPv6 Local LAN Wildcard: local LAN access preference is disabled  Firewall Rules: none  Client Address: 192.168.100.1  Client Mask: 255.255.255.0  Client IPv6 Address: FE80:0:0:0:72F5:2CAF:BCCC:5145 (auto-generated)  Client IPv6 Mask: FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFC  TLS MTU: 1367  TLS Compression: disabled  TLS Keep Alive: 20 seconds  TLS Rekey Interval: none  TLS DPD: 30 seconds  DTLS: enabled  DTLS MTU: 1406  DTLS Compression: disabled  DTLS Keep Alive: 20 seconds  DTLS Rekey Interval: none  DTLS DPD: 30 seconds  Session Timeout: none  Session Timeout Alert Interval: 60 seconds  Session Timeout Remaining: none  Disconnect Timeout: 1800 seconds  Idle Timeout: 1800 seconds  Server: ASA (9.9(2)36)  MUS Host: unknown  DAP User Message: none  Quarantine State: disabled  Always On VPN: not disabled  Lease Duration: 1209600 seconds  Default Domain: cisco.com  Home page: unknown  Smart Card Removal Disconnect: enabled  License Response: unknown  SG TCP Keep Alive: enabled  Peer's Local IPv4 Address: N/A  Peer's Local IPv6 Address: N/A  Peer's Remote IPv4 Address: N/A  Peer's Remote IPv6 Address: N/A  Peer's host name: bglanyconnect.cisco.com  Client Protocol Bypass: false
Jul  1 08:42:50 machine acvpnagent[1785]: The Primary SSL connection to the secure gateway has been established.
Jul  1 08:42:50 machine acvpnagent[1785]: Function: OnTunnelStateChange File: ../../vpn/Agent/TND.cpp Line: 2030 tunnel state change notification (new 0, old 0)
Jul  1 08:42:50 machine acvpnagent[1785]: Function: addSplitIncludeNetworksForTunnelDnsServers File: ../../vpn/Agent/VpnMgr.cpp Line: 1108 Added split-include network for tunnel DNS server 10.10.10.99
Jul  1 08:42:50 machine acvpnagent[1785]: VPN Adapter Configuration:  IPv4 address: 192.168.100.1/24  IPv6 address: FE80:0:0:0:72F5:2CAF:BCCC:5145/126 (auto-generated)  Default domain: cisco.com  DNS suffixes: N/A  DNS servers: 10.10.10.99  WINS servers: N/A  MTU: 1406
Jul  1 08:42:50 machine acvpnagent[1785]: Host Configuration:  Public address: 10.106.44.166/24  Potential public addresses: 10.106.44.166  Private Address: 192.168.100.1/24  Private IPv6 Address: FE80:0:0:0:72F5:2CAF:BCCC:5145/126 (auto-generated)  Remote Peers: 10.106.63.179 (TCP port 443, UDP port 443, source address 10.106.44.166)  Private Networks: 2 (10.0.0.0/24, 10.10.10.99/32)  Private IPv6 Networks: none  Public Networks: none  Public IPv6 Networks: none  Tunnel Mode: yes  Tunnel all DNS: no
Jul  1 08:42:50 machine NetworkManager[940]: <info>  [1561984970.3025] device (cscotun0): state change: unmanaged -> unavailable (reason 'connection-assumed') [10 20 41]
Jul  1 08:42:50 machine acvpnui[11774]: Message type information sent to the user: Checking for product updates...
Jul  1 08:42:50 machine acvpnui[11774]: Message type information sent to the user: Checking for customization updates...
Jul  1 08:42:50 machine NetworkManager[940]: <info>  [1561984970.3046] keyfile: add connection in-memory (c9f1c86e-5e5c-4966-8260-be7e751b642d,"cscotun0")
Jul  1 08:42:50 machine acvpnui[11774]: Message type information sent to the user: Performing any required updates...
Jul  1 08:42:50 machine NetworkManager[940]: <info>  [1561984970.3051] device (cscotun0): state change: unavailable -> disconnected (reason 'connection-assumed') [20 30 41]
Jul  1 08:42:50 machine acvpnui[11774]: Message type information sent to the user: The AnyConnect Downloader updates have been completed.
Jul  1 08:42:50 machine NetworkManager[940]: <info>  [1561984970.3058] device (cscotun0): Activation: starting connection 'cscotun0' (c9f1c86e-5e5c-4966-8260-be7e751b642d)
Jul  1 08:42:50 machine acvpnui[11774]: VPN state: Connecting Network state: Network Accessible Network control state: Network Access: Available Network type: Undefined
Jul  1 08:42:50 machine acvpnui[11774]: Message type information sent to the user: Establishing VPN session...
Jul  1 08:42:50 machine acvpnui[11774]: Message type information sent to the user: Establishing VPN - Initiating connection...
Jul  1 08:42:50 machine NetworkManager[940]: <info>  [1561984970.3064] device (cscotun0): state change: disconnected -> prepare (reason 'none') [30 40 0]
Jul  1 08:42:50 machine acvpnui[11774]: Message type information sent to the user: Establishing VPN - Examining system...
Jul  1 08:42:50 machine NetworkManager[940]: <info>  [1561984970.3067] device (cscotun0): state change: prepare -> config (reason 'none') [40 50 0]
Jul  1 08:42:50 machine acvpnui[11774]: Message type information sent to the user: Establishing VPN - Activating VPN adapter...
Jul  1 08:42:50 machine NetworkManager[940]: <info>  [1561984970.3068] device (cscotun0): state change: config -> ip-config (reason 'none') [50 70 0]
Jul  1 08:42:50 machine acvpnui[11774]: Message type information sent to the user: Establishing VPN - Configuring system...
Jul  1 08:42:50 machine NetworkManager[940]: <info>  [1561984970.3070] device (cscotun0): state change: ip-config -> ip-check (reason 'none') [70 80 0]
Jul  1 08:42:50 machine NetworkManager[940]: <info>  [1561984970.3073] device (cscotun0): state change: ip-check -> secondaries (reason 'none') [80 90 0]
Jul  1 08:42:50 machine NetworkManager[940]: <info>  [1561984970.3075] device (cscotun0): state change: secondaries -> activated (reason 'none') [90 100 0]
Jul  1 08:42:50 machine NetworkManager[940]: <info>  [1561984970.3111] device (cscotun0): Activation: successful, device activated.
Jul  1 08:42:50 machine dbus[935]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service'
Jul  1 08:42:50 machine systemd[1]: Starting Network Manager Script Dispatcher Service...
Jul  1 08:42:50 machine dbus[935]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Jul  1 08:42:50 machine systemd[1]: Started Network Manager Script Dispatcher Service.
Jul  1 08:42:50 machine nm-dispatcher: req:1 'up' [cscotun0]: new request (1 scripts)
Jul  1 08:42:50 machine nm-dispatcher: req:1 'up' [cscotun0]: start running ordered scripts...
Jul  1 08:42:50 machine acvpnagent[1785]: Function: getDnsConfiguration File: ../../vpn/Common/Utility/NetInterface_unix.cpp Line: 1247 Unable to get domain list for interface ens32.
Jul  1 08:42:50 machine acvpnagent[1785]: Function: getDnsConfiguration File: ../../vpn/Common/Utility/NetInterface_unix.cpp Line: 1247 Unable to get domain list for interface cscotun0.
Jul  1 08:42:50 machine acvpnagent[1785]: Function: getDnsConfiguration File: ../../vpn/Common/Utility/NetInterface_unix.cpp Line: 1247 Unable to get domain list for interface ens32.
Jul  1 08:42:50 machine acvpnagent[1785]: Function: getDnsConfiguration File: ../../vpn/Common/Utility/NetInterface_unix.cpp Line: 1247 Unable to get domain list for interface ens32.
Jul  1 08:42:50 machine acvpnagent[1785]: Function: getDnsConfiguration File: ../../vpn/Common/Utility/NetInterface_unix.cpp Line: 1247 Unable to get domain list for interface cscotun0.
Jul  1 08:42:50 machine NetworkManager[940]: <info>  [1561984970.6920] policy: set 'cscotun0' (cscotun0) as default for IPv6 routing and DNS
Jul  1 08:42:51 machine acvpnagent[1785]: Function: getDnsConfiguration File: ../../vpn/Common/Utility/NetInterface_unix.cpp Line: 1247 Unable to get domain list for interface ens32.
Jul  1 08:42:51 machine acvpnagent[1785]: Function: getDnsConfiguration File: ../../vpn/Common/Utility/NetInterface_unix.cpp Line: 1247 Unable to get domain list for interface cscotun0.
Jul  1 08:42:51 machine acvpnagent[1785]: Function: getDnsConfiguration File: ../../vpn/Common/Utility/NetInterface_unix.cpp Line: 1247 Unable to get domain list for interface ens32.
Jul  1 08:42:51 machine acvpnagent[1785]: Function: getDnsConfiguration File: ../../vpn/Common/Utility/NetInterface_unix.cpp Line: 1247 Unable to get domain list for interface ens32.
Jul  1 08:42:51 machine systemd[1]: Reloading OpenBSD Secure Shell server.
Jul  1 08:42:51 machine systemd[1]: Reloaded OpenBSD Secure Shell server.
Jul  1 08:42:51 machine acvpnagent[1785]: Function: getDnsConfiguration File: ../../vpn/Common/Utility/NetInterface_unix.cpp Line: 1247 Unable to get domain list for interface cscotun0.
Jul  1 08:42:52 machine acvpnagent[1785]: Function: applyFirewallConfiguration File: ../../vpn/AgentUtilities/HostConfigMgr.cpp Line: 1187 No Firewall Rules to configure
Jul  1 08:42:52 machine acvpnagent[1785]: The network control state changed to restricted.
Jul  1 08:42:52 machine acvpnui[11774]: Message type information sent to the user: Establishing VPN...
Jul  1 08:42:52 machine acvpnui[11774]: Function: setSessionInfo File: ../../vpn/Api/VPNStatsBase.cpp Line: 1097 Invoked Function: CSessionInfoTlv::GetAppliedSecureRouteCount Return Code: -32440304 (0xFE110010) Description: TLV_ERROR_NO_ATTRIBUTE
Jul  1 08:42:52 machine acvpnui[11774]: Function: setSessionInfo File: ../../vpn/Api/VPNStatsBase.cpp Line: 1204 Invoked Function: CSessionInfoTlv::GetAppliedNonsecureRouteCount Return Code: -32440304 (0xFE110010) Description: TLV_ERROR_NO_ATTRIBUTE
Jul  1 08:42:52 machine acvpnui[11774]: VPN state: Connected Network state: Network Accessible Network control state: Network Access: Restricted Network type: Undefined
Jul  1 08:42:52 machine acvpnui[11774]: Using default preferences. Some settings (e.g. certificate matching) may not function as expected if a local profile is expected to be used. Verify that the selected host is in the server list section of the profile and that the profile is configured on the secure gateway.
Jul  1 08:42:52 machine acvpnui[11774]: Function: getProfileNameFromHost File: ../../vpn/Api/ProfileMgr.cpp Line: 1250 No profile available for host bglanyconnect.cisco.com.
Jul  1 08:42:52 machine acvpnui[11774]: Function: getHostInitSettings File: ../../vpn/Api/ProfileMgr.cpp Line: 1334 Profile () not found. Using default settings.
Jul  1 08:42:52 machine acvpnui[11774]: Message type information sent to the user: Connected to bglanyconnect.cisco.com.
Jul  1 08:42:52 machine acvpnagent[1785]: Function: OnTunnelStateChange File: ../../vpn/Agent/TND.cpp Line: 2030 tunnel state change notification (new 1, old 0)
Jul  1 08:42:52 machine acvpnagent[1785]: The VPN connection has been established and can now pass data.
Jul  1 08:42:52 machine acvpnagent[1785]: The Primary DTLS connection to the secure gateway is being established.
Jul  1 08:42:52 machine acvpnagent[1785]: Function: OnTunnelStateChange File: ../../vpn/Agent/TND.cpp Line: 2030 tunnel state change notification (new 1, old 1)
Jul  1 08:42:52 machine acvpnagent[1785]: Function: initiateTransport File: ../../vpn/Agent/DtlsTunnelTransport.cpp Line: 238 Opened DTLS socket from [10.106.44.166]:35312 to [10.106.63.179]:443
Jul  1 08:42:52 machine acvpndownloader[13609]: Function: WaitForCompletion File: ../../vpn/Common/Utility/Thread.cpp Line: 311 The thread has successfully completed execution.
Jul  1 08:42:52 machine acvpndownloader[13609]: Cisco AnyConnect Secure Mobility Client Downloader (VPN) exiting, version 4.6.03049 , return code 0 [0x00000000]
Jul  1 08:42:52 machine acvpnagent[1785]: A routing table change notification has been received.  Starting automatic correction of the routing table.
Jul  1 08:42:52 machine acvpnagent[1785]: Automatic correction of the routing table has been successful.
Jul  1 08:42:52 machine acvpnagent[1785]: Function: OnIpcMessageReceived File: ../../vpn/Common/IPC/IPCDepot.cpp Line: 1115 Invoked Function: CIpcTransport::OnSocketReadComplete Return Code: -33292279 (0xFE040009) Description: IPCTRANSPORT_ERROR_UNEXPECTED
Jul  1 08:42:52 machine acvpnagent[1785]: Function: writeSocketBlocking File: ../../vpn/Common/IPC/UdpTcpTransports_unix.cpp Line: 429 Invoked Function: ::write Return Code: 32 (0x00000020) Description: unknown
Jul  1 08:42:52 machine acvpnagent[1785]: Function: terminateIpcConnection File: ../../vpn/Common/IPC/IPCTransport.cpp Line: 459 Invoked Function: CSocketTransport::writeSocketBlocking Return Code: -31588341 (0xFE1E000B) Description: SOCKETTRANSPORT_ERROR_WRITE
Jul  1 08:42:52 machine acvpnagent[1785]: A DTLS connection has been established using cipher DHE-RSA-AES256-SHA
Jul  1 08:42:52 machine acvpnagent[1785]: The Primary DTLS connection to the secure gateway has been established.
Jul  1 08:42:52 machine acvpnui[11774]: Function: launchCachedDownloader File: ../../vpn/Api/ConnectMgr.cpp Line: 8274 Invoked Function: ConnectMgr::launchCachedDownloader Return Code: 0 (0x00000000) Description: Cached Downloader terminated normally
Jul  1 08:42:52 machine acvpnui[11774]: Using default preferences. Some settings (e.g. certificate matching) may not function as expected if a local profile is expected to be used. Verify that the selected host is in the server list section of the profile and that the profile is configured on the secure gateway.
Jul  1 08:42:52 machine acvpnui[11774]: Function: getProfileNameFromHost File: ../../vpn/Api/ProfileMgr.cpp Line: 1250 No profile available for host bglanyconnect.cisco.com.
Jul  1 08:42:52 machine acvpnui[11774]: message repeated 2 times: [ Function: getProfileNameFromHost File: ../../vpn/Api/ProfileMgr.cpp Line: 1250 No profile available for host bglanyconnect.cisco.com.]
Jul  1 08:42:52 machine acvpnui[11774]: Function: reloadPreferencesAfterUpdates File: ../../vpn/Api/ConnectMgr.cpp Line: 10859 Secure gateway (bglanyconnect.cisco.com) was not found in profile .
Jul  1 08:42:52 machine acvpnui[11774]: Function: getProfileNameFromHost File: ../../vpn/Api/ProfileMgr.cpp Line: 1250 No profile available for host bglanyconnect.cisco.com.
Jul  1 08:42:52 machine acvpnui[11774]: Function: getHostInitSettings File: ../../vpn/Api/ProfileMgr.cpp Line: 1334 Profile () not found. Using default settings.
Jul  1 08:42:52 machine acvpnui[11774]: Function: getProfileNameFromHost File: ../../vpn/Api/ProfileMgr.cpp Line: 1250 No profile available for host bglanyconnect.cisco.com.
Jul  1 08:42:52 machine acvpnui[11774]: Function: getHostInitSettings File: ../../vpn/Api/ProfileMgr.cpp Line: 1334 Profile () not found. Using default settings.
Jul  1 08:42:52 machine acvpnui[11774]: VPN state: Connected Network state: Network Accessible Network control state: Network Access: Restricted Network type: Undefined
Jul  1 08:42:52 machine acvpnagent[1785]: Function: OnTunnelStateChange File: ../../vpn/Agent/TND.cpp Line: 2030 tunnel state change notification (new 1, old 1)
Jul  1 08:42:53 machine systemd[1]: Reloading OpenBSD Secure Shell server.
Jul  1 08:42:53 machine systemd[1]: Reloaded OpenBSD Secure Shell server.
Jul  1 08:42:53 machine acvpnui[11774]: Message type information sent to the user: Connected to bglanyconnect.cisco.com.
    •  DART (Diagnostic and Reporting Tool, Ferramenta de diagnóstico e geração de relatórios) em cliente Linux

      Semelhante ao Windows e ao MAC, o cliente Linux também tem o DART       funcionalidade. Isso pode ser usado pela GUI ou pela CLI.
      O DART precisa ser executado como um usuário administrador para coletar registros completos em um cliente Linux.

      1. O DART pode ser executado a partir da linha de comando, navegando até este caminho:

       
      tactest:bin$ cd /opt/cisco/anyconnect/dart
tactest:dart$ ls
anyconnect-linux64-4.6.03049-dart-webdeploy-k9-20190627095410.log  dartui     xml
dartcli                                                            resources
tactest:dart$ ./dartcli 

Cisco AnyConnect Diagnostic and Reporting Tool 4.6.03049 .

Copyright (c) 2008 - 2018 Cisco Systems, Inc.
All Rights Reserved.

Bundle option selected: default
Bundle location: /home/tactest/Desktop/DARTBundle_0701_0933.zip

Parsing request and configuration XMLs...            1%iptables v1.6.0: can't initialize iptables table `filter': Permission denied (you must be root)
Perhaps iptables or your kernel needs to be upgraded.
ip6tables v1.6.0: can't initialize ip6tables table `filter': Permission denied (you must be root)
Perhaps ip6tables or your kernel needs to be upgraded.
Processing Posture application logs...              76%sh: 1: /home/tactest/.cisco/hostscan/lib/wadiagnose: not found
sh: 1: /opt/cisco/hostscan/lib/wadiagnose: not found
DART has finished...                               100%

      2. Para executar o DART a partir da GUI, procure anyconnect na GUI do Linux, clique em Cisco DART e execute as instruções. O pacote DART coletado é armazenado no desktop.


      DART Bundle
      3. Para copiar o pacote DART do cliente Linux para sua estação de trabalho, use o comando:

      scp username@10.106.44.166:/home/ /Desktop/DARTBundle_0701_0945.zip /Users/dmoudgil/Desktop/Ubuntu/
      Aqui está um documento para referência ao DART em sistemas operacionais diferentes: Como coletar o pacote DART para o Anyconnect

    • Em caso de problemas desconhecidos, o cliente VPN pode ser reiniciado por esta linha de comando:
    tactest:bin$ sudo /etc/init.d/vpnagentd restart
[sudo] password for tactest: 
[ ok ] Restarting vpnagentd (via systemctl): vpnagentd.service.
tactest:bin$

    Histórico de revisões

    Revisão Data de publicação Comentários
    2.0
    12-Dec-2022
    Revisado para estar em conformidade com os padrões atuais de publicação da Cisco.
    1.0
    09-Jul-2019
    Versão inicial
    TAC Authored

    Colaborado por engenheiros da Cisco

    • Created by Dinesh Moudgil
      Engenheiro HTTS da Cisco
    • Edited by Cesar Lopez Zamarripa
      Engenheiro de consultoria técnica da Cisco

    Este documento lhe foi útil?

    FeedbackFeedback

    Contate a Cisco

    Este documento se refere a estes produtos