Hiperverificação: Hyperflex Health & Ferramenta de verificação de pré-atualização - HyperV
Contents
Introduction
Este documento descreve o processo para executar a ferramenta Verificação de integridade e pré-atualização do Hyperflex no cluster HyperV. Essa ferramenta é um utilitário para executar autoverificações proativas em sistemas hiperflex para garantir sua estabilidade e resiliência. Ele ajuda a automatizar uma lista de verificações de integridade e pré-atualização em sistemas hiperflex para economizar tempo durante operações de atualização e manutenção de hiperflex.
OBSERVAÇÃO: faça sempre o download da versão mais recente da ferramenta antes de usá-la. Como a ferramenta é aprimorada com frequência, o uso de versões mais antigas pode resultar na falta de verificações importantes.
Sistemas HX suportados
- Versões hiperflex - 3.0, 3.5, 4.0
- Cluster padrão Hyperflex
- Suportado apenas no cluster Hyperflex no Microsoft Hyper-V
NOTA: Como executar o Hypercheck no cluster do hiperflex ESXi, Visite-
Quando usar
- Antes das atualizações do Hyperflex.
- Verificação de Integridade do Hyperflex antes e depois das Janelas de Manutenção
- Para identificar unidades/discos com falha.
- Ao trabalhar com o Cisco TAC
- Verificação de integridade pró-ativa a qualquer momento.
Como usar
Etapa 1. Baixe o Hyperflex-Hypercheck.zip da conta do Cisco github devnet aqui .Obtenha a cópia mais recente que terá as melhorias e atualizações mais recentes.
NOTA: Use apenas o script baixado da conta do Cisco github devnet.
Etapa 2. Faça o upload para a VM do controlador de armazenamento (SCVM) com o IP de gerenciamento de cluster (CMIP).
Use seu método preferido - scp/sftp/ftp/tftp - para copiar o Hypercheck-HyperV-master.zip para o diretório /tmp
Para MAC:
Execute o SCP a partir da CLI (confirme se o Hyperflex-Hypercheck.zip está na mesma pasta a partir da qual você está executando o scp)
# scp Hypercheck-HyperV-master.zip root@<scvm-eth0:mgmtip>:/tmp/
Utilize o seguinte para identificar o IP de Gerenciamento de Cluster em seu ambiente HX - manual do Hyperflex
Para Windows:
Podemos usar o WINSCP para transferir os arquivos conforme mostrado abaixo-
Etapa 3. Extraia o conteúdo do Hypercheck-HyperV-master.zip
Digite cd /tmp para alterar para o diretório /tmp
root@hyper11-stc:~# cd /tmp/
Digite unzip Hypercheck-HyperV-master.zip para extrair os arquivos
root@hyper11-stc:/tmp# unzip Hypercheck-HyperV-master.zip
Archive: Hypercheck-HyperV-master.zip
67f0d63639785f5c18b8ed35ff789f748157e944
creating: Hypercheck-HyperV-master/
inflating: Hypercheck-HyperV-master/README.md
inflating: Hypercheck-HyperV-master/ReadMe.txt
inflating: Hypercheck-HyperV-master/TestInfo.txt
inflating: Hypercheck-HyperV-master/VHXTool.py
inflating: Hypercheck-HyperV-master/prettytable.py
inflating: Hypercheck-HyperV-master/progressbar.py
root@hyper11-stc:/tmp#
Etapa 4. Executar o script VHXTool Python
Digite cd Hypercheck-HyperV-master para ir para o diretório Hypercheck-HyperV-master
root@hyper11-stc:/tmp# cd Hypercheck-HyperV-master
Digite python VHXTool.py para executar o script
root@hyper11-stc:/tmp/Hypercheck-HyperV-master# python VHXTool.py
Etapa 5. Insira o nome de usuário do administrador do HyperV, a senha e a senha raiz do cluster quando solicitado
Please enter below info of Hyper-V Cluster:
Enter the Hyper-V Username(Ex: Domain\Username):
Enter the Hyper-V Password:
Enter the HX-Cluster Root Password:
NOTA: Para interromper a execução do script, use a tecla [CTRL+Z] e ela será interrompida imediatamente
Etapa 6. A ferramenta Hyperflex-Hypercheck solicitará que você pergunte se o Ative Diretory está instalado em um bare metal em seu ambiente.
NOTA: O script continuará a ser executado independentemente da entrada fornecida (Sim/Não) aqui. A mensagem a seguir será exibida como uma palavra de cuidado.
"Lembre-se de que todos os servidores Ative Diretory/DNS não devem ser aninhados em máquinas virtuais de armazenamento de dados Hyperflex. Sempre deve haver ADs físicos (bare metal) em seu ambiente"
Passo 7. A ferramenta Hyperflex-Hypercheck inicia suas verificações. A conclusão da execução levará de 5 a 10 minutos, dependendo do número de nós convergentes no cluster
Etapa 8. Entendendo as saídas/verificações realizadas
As seguintes verificações são realizadas pela ferramenta Hyperflex-Hyperchecktool
Hyperflex Checks: (Below checks are performed on all the storage controller VMs)
Cluster services check - Verifies the status of storfs, stMgr and stNodeMgr services.
Enospc state check - Checks if the cluster space usage is above the warning threshold or no.
Zookeeper check - Checks whether the Zookeeper is running or no.
Exhibitor check - Verfies the status of the Exhibitor service which manages the ZK.
System Disks Usage - Checks if /sda1, var/stv and /var/zookeeper is less than 80%.
HDD health check - Reports if you have any blacklisted disk in your cluster.
DNS check - Checks whether DNS is configured and reachable.
Timestamp check - Checks if all the controller VMs have the exact same time.
NTP sync check - Checks whether NTP is reachable from the storage controller VMs and synced.
Check package & versions - Checks for packages and versions on Storage Controller VMs.
Check Iptables count - Checks for Iptables count on and ensure it is same on all Storage Controller VMs.
Cache Disks check - Checks the number of Cache Disks.
Extra pnodes check - Looks for any extra/duplicate pnode entries in the cluster.
Memory usage check - Checks for available memory more than 2GB.
Incidence of OOM in the log file - Checks for any previous incidence of Out Of Memory Condition.
Check permissions for /tmp - Checks if the /tmp permissions are set correctly.
Check Cluster Access Policy - Checks the Configured Cluster Access Policy
CMIP Hostname – Check if the clustermanagementip has hostname defined
Check domain join health – checking domain join health of the node.
HYPER-V Checks: (Below checks are performed on each HyperV node)
Hostname – check and print the hostname of the node.
Cluster Failover – check and ensure cluster failover is enabled.
Hyper-V Role – Check and ensure HyperV role is enabled.
Node State - Checks the state of the node.
Network Interfaces State - Checks the Network Interfaces State of the node.
Remote Management Enabled - Check if the Remote Management is enabled on the node.
MTU for Storage Data Network - Check MTU for the Storage Data Network of the node.
Domain and forest details - Check the Domain and forest details of the cluster.
Host file entries- Check if the host file have correct entries.
Check Adapter details - Check Adapter details of the node.
Drivers test - Check the status of minifilter drivers.
SMB Test - Checking SMB Path reachability from the node.
VMMS – Checking the VMMS Service status
Etapa 9. Obtenha um relatório das saídas do script. Você pode obtê-lo como mostrado abaixo
O arquivo tar do relatório de hiperverificação é salvo em /var/log/springpath e /tmp/Hypercheck-HyperV-master. Assim, você pode fazer o download do pacote tar em /var/log/springpath ou/tmp/Hypercheck-HyperV-master. Como alternativa, você pode simplesmente gerar e carregar um pacote de suporte a storfs que também conterá o tar do relatório de hiperverificação.
O arquivo tar do relatório de hiperverificação é salvo em /var/log/springpath.
Exemplo de arquivo tar de relatório - VHX_Report_2020_08_29_08_40_20.tar é copiado para o caminho:/var/log/springpath
Digite ls -l | grep VHX_Report para revisar os arquivos criados pela ferramenta Hyperflex-Hypercheck
Under /var/log/springpath,
root@hyper11-stc:/var/log/springpath# ls -l | grep VHX_Report
-rw-r--r-- 1 root root 370K Aug 29 08:47 VHX_Report_2020_08_29_08_40_20.tar
root@hyper10-stc:/var/log/springpath#
Under /tmp/Hypercheck-HyperV-master
root@hyper11-stc:/tmp/Hypercheck-HyperV-master# ls -ltrh
total 576K
-rwxrwxrwx 1 root root 53K Apr 10 2018 prettytable.py
-rwxrwxrwx 1 root root 1.4K Jan 22 2019 progressbar.py
-rwxrwxrwx 1 root root 1.6K Aug 28 00:27 ReadMe.txt
-rwxrwxrwx 1 root root 75K Aug 28 06:32 VHXTool.py
-rwxrwxrwx 1 root root 3.5K Aug 28 06:46 TestInfo.txt
-rw-r--r-- 1 root root 49K Aug 29 08:40 prettytable.pyc
-rw-r--r-- 1 root root 1.8K Aug 29 08:40 progressbar.pyc
drwxr-xr-x 2 root root 4.0K Aug 29 08:47 VHX_Report_2020_08_29_08_40_20
-rw-r--r-- 1 root root 370K Aug 29 08:47 VHX_Report_2020_08_29_08_40_20.tar
Arquivos e registros no pacote de log do Hypercheck-
root@hyper11-stc: tmp/Hypercheck-HyperV-master # cd VHX_Report_2020_08_29_08_40_20
root@hyper11-stc: tmp/Hypercheck-HyperV-master # ls -ltrh
-rw-r--r-- 1 root root 27K Aug 29 08:44 VHX_Report_10.8.16.65.txt
-rw-r--r-- 1 root root 27K Aug 29 08:45 VHX_Report_10.8.16.66.txt
-rw-r--r-- 1 root root 27K Aug 29 08:47 VHX_Report_10.8.16.67.txt
-rw-r--r-- 1 root root 101K Aug 29 08:47 VHX_Tool_Main_Report_2020-08-29_08-47-43_HYPER11-SMB.txt
-rw-r--r-- 1 root root 186K Aug 29 08:47 VHXTool_2020-08-29_08-40-20.log
Etapa 10: Exporte HX_YYY_MM_DD_HH_MM_SS.tar e compartilhe-o com o TAC.
Use seu método preferido para exportar os registros de Hypercheck usando scp/sftp/ftp/tftp do SCVM ou você pode simplesmente fazer o download do pacote de suporte de storfs que conterá o pacote tar VHX_Report.
Etapa 11. Exemplo de saída VHXTool de um cluster de 3 nós
Please enter below info of Hyper-V Cluster:
Enter the Hyper-V Username(Ex: Domain\Username): hx.local\hxadmin
Enter the Hyper-V Password:
Enter the HX-Cluster Root Password:
Is the Active Directory installed on Physical (bare metal) in your Environment (Enter Yes/No): yes
Note: Please be aware that all Active Directory Servers/ DNS Servers should not be nested in Hyperflex datastore virtual machines. There should always be physical (bare metal) ADs in your environment.
SMB Name: HYPER10-SMB
SSH connection established to HX Node: 10.8.16.65
SSH connection established to HX Node: 10.8.16.66
SSH connection established to HX Node: 10.8.16.67
HX Cluster Nodes:
+-------+-----------------+-------------+-----------------+----------+--------------------------+-----------------+------------+
| Nodes | Eth0 IP Address | HostName | Eth1 IP Address | Eth1 MTU | Cluster Mgmt IP | Cluster Data IP | CRM Master |
+-------+-----------------+-------------+-----------------+----------+--------------------------+-----------------+------------+
| 1 | 10.8.16.65 | hyper10-stc | 10.8.18.65 | 9000 | HYPER10-MGMT-IP.hx.local | 10.8.18.69 | 10.8.18.67 |
+-------+-----------------+-------------+-----------------+----------+--------------------------+-----------------+------------+
| 2 | 10.8.16.66 | hyper11-stc | 10.8.18.66 | 9000 | HYPER10-MGMT-IP.hx.local | 10.8.18.69 | 10.8.18.67 |
+-------+-----------------+-------------+-----------------+----------+--------------------------+-----------------+------------+
| 3 | 10.8.16.67 | hyper12-stc | 10.8.18.67 | 9000 | HYPER10-MGMT-IP.hx.local | 10.8.18.69 | 10.8.18.67 |
+-------+-----------------+-------------+-----------------+----------+--------------------------+-----------------+------------+
HX Controller: 10.8.16.65
Cluster services check [########################] COMPLETE
ZooKeeper & Exhibitor check [########################] COMPLETE
HDD health check [########################] COMPLETE
Pre-Upgrade Check [########################] COMPLETE
Hyper-V check [########################] COMPLETE
HX Controller: 10.8.16.66
Cluster services check [########################] COMPLETE
ZooKeeper & Exhibitor check [########################] COMPLETE
HDD health check [########################] COMPLETE
Pre-Upgrade Check [########################] COMPLETE
Hyper-V check [########################] COMPLETE
HX Controller: 10.8.16.67
Cluster services check [########################] COMPLETE
ZooKeeper & Exhibitor check [########################] COMPLETE
HDD health check [########################] COMPLETE
Pre-Upgrade Check [########################] COMPLETE
Hyper-V check [########################] COMPLETE
HX Controller: 10.8.16.65
Test Summary:
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
| Name | Result | Comments |
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
| Cluster services check | PASS | Checks storfs, stMgr, sstNodeMgr service running on each node. |
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
| Enospc state check | PASS | Checks if the cluster storage utilization is above threshold. |
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
| Zookeeper check | PASS | Checks if Zookeeper service is running. |
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
| Exhibitor check | PASS | Checks if Exhibitor in running. |
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
| System Disks Usage | PASS | Checks if /sda1, var/stv and /var/zookeeper is less than 80%. |
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
| HDD health check | PASS | Checks if any drive is in blacklisted state. |
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
| DNS check | PASS | Checks if configured DNS is reachable. |
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
| Timestamp check | PASS | Checks if the timestamp is same across all Nodes. |
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
| NTP sync check | PASS | Checks if the NTP is synced with NTP server. |
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
| Check package & versions | PASS | Checks for count and version of HX packages on each node. |
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
| Check Iptables count | PASS | Checks if the IP Table count matches on all nodes. |
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
| Cache Disks check | PASS | Checks the number of Cache Disks. |
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
| Extra pnodes check | PASS | Checks for any stale Node entry. |
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
| Memory usage check | PASS | Checks for available memory more than 2GB. |
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
| Incidence of OOM in the log file | PASS | Checks for any previous incidence of Out Of Memory Condition. |
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
| Check permissions for /tmp | PASS | Checks if the /tmp permissions are set correctly. |
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
| Check Cluster Access Policy | Lenient | Checks the Configured Cluster Access Policy |
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
| Check CMIP Hostname | PASS | Check if the clustermanagementip has hostname defined. |
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
| Domain join health | Name = hyper10-stc | Checking domain join health of the Node. |
| | Domain = HX.LOCAL | |
| | Distinguished Name = CN=HYPER10-STC,OU=HYPER10,DC=hx,DC=local | |
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
HX Controller: 10.8.16.66
Test Summary:
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
| Name | Result | Comments |
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
| Cluster services check | PASS | Checks storfs, stMgr, sstNodeMgr service running on each node. |
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
| Enospc state check | PASS | Checks if the cluster storage utilization is above threshold. |
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
| Zookeeper check | PASS | Checks if Zookeeper service is running. |
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
| Exhibitor check | PASS | Checks if Exhibitor in running. |
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
| System Disks Usage | PASS | Checks if /sda1, var/stv and /var/zookeeper is less than 80%. |
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
| HDD health check | PASS | Checks if any drive is in blacklisted state. |
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
| DNS check | PASS | Checks if configured DNS is reachable. |
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
| Timestamp check | PASS | Checks if the timestamp is same across all Nodes. |
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
| NTP sync check | PASS | Checks if the NTP is synced with NTP server. |
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
| Check package & versions | PASS | Checks for count and version of HX packages on each node. |
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
| Check Iptables count | PASS | Checks if the IP Table count matches on all nodes. |
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
| Cache Disks check | PASS | Checks the number of Cache Disks. |
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
| Extra pnodes check | PASS | Checks for any stale Node entry. |
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
| Memory usage check | PASS | Checks for available memory more than 2GB. |
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
| Incidence of OOM in the log file | PASS | Checks for any previous incidence of Out Of Memory Condition. |
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
| Check permissions for /tmp | PASS | Checks if the /tmp permissions are set correctly. |
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
| Check Cluster Access Policy | Lenient | Checks the Configured Cluster Access Policy |
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
| Check CMIP Hostname | PASS | Check if the clustermanagementip has hostname defined. |
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
| Domain join health | Name = hyper11-stc | Checking domain join health of the Node. |
| | Domain = HX.LOCAL | |
| | Distinguished Name = CN=HYPER11-STC,OU=HYPER10,DC=hx,DC=local | |
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
HX Controller: 10.8.16.67
Test Summary:
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
| Name | Result | Comments |
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
| Cluster services check | PASS | Checks storfs, stMgr, sstNodeMgr service running on each node. |
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
| Enospc state check | PASS | Checks if the cluster storage utilization is above threshold. |
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
| Zookeeper check | PASS | Checks if Zookeeper service is running. |
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
| Exhibitor check | PASS | Checks if Exhibitor in running. |
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
| System Disks Usage | PASS | Checks if /sda1, var/stv and /var/zookeeper is less than 80%. |
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
| HDD health check | PASS | Checks if any drive is in blacklisted state. |
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
| DNS check | PASS | Checks if configured DNS is reachable. |
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
| Timestamp check | PASS | Checks if the timestamp is same across all Nodes. |
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
| NTP sync check | PASS | Checks if the NTP is synced with NTP server. |
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
| Check package & versions | PASS | Checks for count and version of HX packages on each node. |
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
| Check Iptables count | PASS | Checks if the IP Table count matches on all nodes. |
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
| Cache Disks check | PASS | Checks the number of Cache Disks. |
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
| Extra pnodes check | PASS | Checks for any stale Node entry. |
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
| Memory usage check | PASS | Checks for available memory more than 2GB. |
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
| Incidence of OOM in the log file | PASS | Checks for any previous incidence of Out Of Memory Condition. |
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
| Check permissions for /tmp | PASS | Checks if the /tmp permissions are set correctly. |
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
| Check Cluster Access Policy | Lenient | Checks the Configured Cluster Access Policy |
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
| Check CMIP Hostname | PASS | Check if the clustermanagementip has hostname defined. |
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
| Domain join health | Name = hyper12-stc | Checking domain join health of the Node. |
| | Domain = HX.LOCAL | |
| | Distinguished Name = CN=HYPER12-STC,OU=HYPER10,DC=hx,DC=local | |
+----------------------------------+---------------------------------------------------------------+----------------------------------------------------------------+
################################################################################
Hyper-V check:
################################################################################
Hyper-V Clusters: 10.8.16.61, 10.8.16.62, 10.8.16.63
Hyper-V Host: 10.8.16.61
+------------------------------------------+-------------------------------------------------------------------------------------+-------------------------------------------------------------+
| Name | Status | Comments |
+------------------------------------------+-------------------------------------------------------------------------------------+-------------------------------------------------------------+
| HostName | HYPER10 | Check if the hostname is defined. |
+------------------------------------------+-------------------------------------------------------------------------------------+-------------------------------------------------------------+
| Cluster Failover | Installed | Check if the Failover Cluster Manager feature is installed. |
+------------------------------------------+-------------------------------------------------------------------------------------+-------------------------------------------------------------+
| Hyper-V Role | Installed | Check if the Hyper-V Manager feature is installed. |
+------------------------------------------+-------------------------------------------------------------------------------------+-------------------------------------------------------------+
| Node State | PASS | Check the Node State. |
+------------------------------------------+-------------------------------------------------------------------------------------+-------------------------------------------------------------+
| Network Interfaces State | PASS | Check the Network Interfaces State. |
+------------------------------------------+-------------------------------------------------------------------------------------+-------------------------------------------------------------+
| Remote Management Enabled | PASS | Check if the Remote Management is enabled on the node. |
+------------------------------------------+-------------------------------------------------------------------------------------+-------------------------------------------------------------+
| MTU for Storage Data Network | 9000 | Check MTU for the Storage Data Network. |
+------------------------------------------+-------------------------------------------------------------------------------------+-------------------------------------------------------------+
| Check the Domain and forest details | Description : HXDC-DOMAIN | Check the Domain and forest details of the cluster. |
| | DnsForestName : hx.local | |
| | DomainControllerAddress : \\10.8.12.254 | |
| | DomainControllerName : \\HXDC | |
| | DomainName : HXDC-DOMAIN | |
| | Status : OK | |
+------------------------------------------+-------------------------------------------------------------------------------------+-------------------------------------------------------------+
| Check host file entries | | Check if the host file have correct entries. |
| | 10.8.18.65 HYPER10-SMB.hx.local | |
| | 10.8.18.69 HYPER10-SMB.hx.local | |
+------------------------------------------+-------------------------------------------------------------------------------------+-------------------------------------------------------------+
| Check Adapter details | InterfaceAlias InterfaceDescription IPv4Address | Check Adapter details of the node. |
| | -------------- -------------------- ----------- | |
| | vswitch-hx-livemigration Hyper-V Virtual Ethernet Adapter #4 {10.8.17.61} | |
| | vswitch-hx-vm-network Hyper-V Virtual Ethernet Adapter #3 {10.8.19.61} | |
| | vswitch-hx-storage-data Hyper-V Virtual Ethernet Adapter #2 {10.8.18.61} | |
| | vswitch-hx-inband-mgmt Hyper-V Virtual Ethernet Adapter {10.8.16.61} | |
| | vEthernet (New Virtual Switch) Hyper-V Virtual Ethernet Adapter #5 {169.254.84.129} | |
+------------------------------------------+-------------------------------------------------------------------------------------+-------------------------------------------------------------+
| Drivers test | Filter Name Num Instances Altitude Frame | Check the status of minifilter drivers. |
| | ------------------------------ ------------- ------------ ----- | |
| | CsvNSFlt 1 404900 0 | |
| | CsvFlt 0 404800 0 | |
| | CCFFilter 1 261160 0 | |
| | storqosflt 1 244000 0 | |
| | ResumeKeyFilter 0 202000 0 | |
| | wcifs 0 189900 0 | |
| | CldFlt 0 180451 0 | |
| | FileCrypt 0 141100 0 | |
| | svhdxflt 0 135100 0 | |
| | luafv 1 135000 0 | |
| | npsvctrig 1 46000 0 | |
| | Wof 1 40700 0 | |
+------------------------------------------+-------------------------------------------------------------------------------------+-------------------------------------------------------------+
| Virtual Machine Management service check | PASS | Checking if VMMS service is Up and Running. |
+------------------------------------------+-------------------------------------------------------------------------------------+-------------------------------------------------------------+
| SMB Test | PASS | Checking SMB reachability of node. |
+------------------------------------------+-------------------------------------------------------------------------------------+-------------------------------------------------------------+
Hyper-V Host: 10.8.16.62
+------------------------------------------+---------------------------------------------------------------------------------------------+-------------------------------------------------------------+
| Name | Status | Comments |
+------------------------------------------+---------------------------------------------------------------------------------------------+-------------------------------------------------------------+
| HostName | HYPER11 | Check if the hostname is defined. |
+------------------------------------------+---------------------------------------------------------------------------------------------+-------------------------------------------------------------+
| Cluster Failover | Installed | Check if the Failover Cluster Manager feature is installed. |
+------------------------------------------+---------------------------------------------------------------------------------------------+-------------------------------------------------------------+
| Hyper-V Role | Installed | Check if the Hyper-V Manager feature is installed. |
+------------------------------------------+---------------------------------------------------------------------------------------------+-------------------------------------------------------------+
| Node State | PASS | Check the Node State. |
+------------------------------------------+---------------------------------------------------------------------------------------------+-------------------------------------------------------------+
| Network Interfaces State | PASS | Check the Network Interfaces State. |
+------------------------------------------+---------------------------------------------------------------------------------------------+-------------------------------------------------------------+
| Remote Management Enabled | PASS | Check if the Remote Management is enabled on the node. |
+------------------------------------------+---------------------------------------------------------------------------------------------+-------------------------------------------------------------+
| MTU for Storage Data Network | 9000 | Check MTU for the Storage Data Network. |
+------------------------------------------+---------------------------------------------------------------------------------------------+-------------------------------------------------------------+
| Check the Domain and forest details | Description : HXDC-DOMAIN | Check the Domain and forest details of the cluster. |
| | DnsForestName : hx.local | |
| | DomainControllerAddress : \\10.8.12.254 | |
| | DomainControllerName : \\HXDC | |
| | DomainName : HXDC-DOMAIN | |
| | Status : OK | |
+------------------------------------------+---------------------------------------------------------------------------------------------+-------------------------------------------------------------+
| Check host file entries | | Check if the host file have correct entries. |
| | 10.8.18.66 HYPER10-SMB.hx.local | |
| | 10.8.18.69 HYPER10-SMB.hx.local | |
+------------------------------------------+---------------------------------------------------------------------------------------------+-------------------------------------------------------------+
| Check Adapter details | InterfaceAlias InterfaceDescription IPv4Address | Check Adapter details of the node. |
| | -------------- -------------------- ----------- | |
| | vswitch-hx-inband-mgmt Hyper-V Virtual Ethernet Adapter {10.8.16.70, 10.8.16.62} | |
| | vswitch-hx-livemigration Hyper-V Virtual Ethernet Adapter #4 {10.8.17.62} | |
| | vswitch-hx-storage-data Hyper-V Virtual Ethernet Adapter #2 {10.8.18.62} | |
| | vswitch-hx-vm-network Hyper-V Virtual Ethernet Adapter #3 {10.8.19.62} | |
| | vEthernet (New Virtual Switch) Hyper-V Virtual Ethernet Adapter #5 {169.254.247.198} | |
+------------------------------------------+---------------------------------------------------------------------------------------------+-------------------------------------------------------------+
| Drivers test | Filter Name Num Instances Altitude Frame | Check the status of minifilter drivers. |
| | ------------------------------ ------------- ------------ ----- | |
| | CsvNSFlt 1 404900 0 | |
| | CsvFlt 0 404800 0 | |
| | CCFFilter 1 261160 0 | |
| | storqosflt 2 244000 0 | |
| | ResumeKeyFilter 0 202000 0 | |
| | wcifs 0 189900 0 | |
| | CldFlt 0 180451 0 | |
| | FileCrypt 0 141100 0 | |
| | svhdxflt 0 135100 0 | |
| | luafv 1 135000 0 | |
| | npsvctrig 1 46000 0 | |
| | Wof 1 40700 0 | |
+------------------------------------------+---------------------------------------------------------------------------------------------+-------------------------------------------------------------+
| Virtual Machine Management service check | PASS | Checking if VMMS service is Up and Running. |
+------------------------------------------+---------------------------------------------------------------------------------------------+-------------------------------------------------------------+
| SMB Test | PASS | Checking SMB reachability of node. |
+------------------------------------------+---------------------------------------------------------------------------------------------+-------------------------------------------------------------+
Hyper-V Host: 10.8.16.63
+------------------------------------------+------------------------------------------------------------------------------------+-------------------------------------------------------------+
| Name | Status | Comments |
+------------------------------------------+------------------------------------------------------------------------------------+-------------------------------------------------------------+
| HostName | HYPER12 | Check if the hostname is defined. |
+------------------------------------------+------------------------------------------------------------------------------------+-------------------------------------------------------------+
| Cluster Failover | Installed | Check if the Failover Cluster Manager feature is installed. |
+------------------------------------------+------------------------------------------------------------------------------------+-------------------------------------------------------------+
| Hyper-V Role | Installed | Check if the Hyper-V Manager feature is installed. |
+------------------------------------------+------------------------------------------------------------------------------------+-------------------------------------------------------------+
| Node State | PASS | Check the Node State. |
+------------------------------------------+------------------------------------------------------------------------------------+-------------------------------------------------------------+
| Network Interfaces State | PASS | Check the Network Interfaces State. |
+------------------------------------------+------------------------------------------------------------------------------------+-------------------------------------------------------------+
| Remote Management Enabled | PASS | Check if the Remote Management is enabled on the node. |
+------------------------------------------+------------------------------------------------------------------------------------+-------------------------------------------------------------+
| MTU for Storage Data Network | 9000 | Check MTU for the Storage Data Network. |
+------------------------------------------+------------------------------------------------------------------------------------+-------------------------------------------------------------+
| Check the Domain and forest details | Description : HXDC-DOMAIN | Check the Domain and forest details of the cluster. |
| | DnsForestName : hx.local | |
| | DomainControllerAddress : \\10.8.12.254 | |
| | DomainControllerName : \\HXDC | |
| | DomainName : HXDC-DOMAIN | |
| | Status : OK | |
+------------------------------------------+------------------------------------------------------------------------------------+-------------------------------------------------------------+
| Check host file entries | | Check if the host file have correct entries. |
| | 10.8.18.67 HYPER10-SMB.hx.local | |
| | 10.8.18.69 HYPER10-SMB.hx.local | |
+------------------------------------------+------------------------------------------------------------------------------------+-------------------------------------------------------------+
| Check Adapter details | InterfaceAlias InterfaceDescription IPv4Address | Check Adapter details of the node. |
| | -------------- -------------------- ----------- | |
| | vswitch-hx-inband-mgmt Hyper-V Virtual Ethernet Adapter {10.8.16.63} | |
| | vswitch-hx-storage-data Hyper-V Virtual Ethernet Adapter #2 {10.8.18.63} | |
| | vswitch-hx-vm-network Hyper-V Virtual Ethernet Adapter #3 {10.8.19.63} | |
| | vswitch-hx-livemigration Hyper-V Virtual Ethernet Adapter #4 {10.8.17.63} | |
| | vEthernet (New Virtual Switch) Hyper-V Virtual Ethernet Adapter #5 {169.254.18.96} | |
+------------------------------------------+------------------------------------------------------------------------------------+-------------------------------------------------------------+
| Drivers test | Filter Name Num Instances Altitude Frame | Check the status of minifilter drivers. |
| | ------------------------------ ------------- ------------ ----- | |
| | CsvNSFlt 1 404900 0 | |
| | CsvFlt 0 404800 0 | |
| | CCFFilter 1 261160 0 | |
| | storqosflt 2 244000 0 | |
| | ResumeKeyFilter 0 202000 0 | |
| | wcifs 0 189900 0 | |
| | CldFlt 0 180451 0 | |
| | FileCrypt 0 141100 0 | |
| | svhdxflt 0 135100 0 | |
| | luafv 1 135000 0 | |
| | npsvctrig 1 46000 0 | |
| | Wof 1 40700 0 | |
+------------------------------------------+------------------------------------------------------------------------------------+-------------------------------------------------------------+
| Virtual Machine Management service check | PASS | Checking if VMMS service is Up and Running. |
+------------------------------------------+------------------------------------------------------------------------------------+-------------------------------------------------------------+
| SMB Test | PASS | Checking SMB reachability of node. |
+------------------------------------------+------------------------------------------------------------------------------------+-------------------------------------------------------------+
Main Report File: VHX_Tool_Main_Report_2020-09-13_09-49-38_HYPER10-SMB.txt
Report tar file: VHX_Report_2020_09_13_21_42_18.tar
Report file copied to path: /var/log/springpath
Release Notes:
https://www.cisco.com/c/en/us/support/hyperconverged-systems/hyperflex-hx-data-platform-software/products-release-notes-list.html
Upgrade Guides:
https://www.cisco.com/c/en/us/support/hyperconverged-systems/hyperflex-hx-data-platform-software/products-installation-guides-list.html
Note:
1) Hypercheck doesnot perform FAILOVER TEST, so please ensure that the upstream is configured for network connectivity for JUMBO or NORMAL MTU size as needed.
Analisar a saída da ferramenta - Próximas etapas
- A ferramenta automatiza o processo de execução de comandos manuais em sistemas Hyperflex.
- Se a ferramenta for executada OK e PASS/COMPLETED em todos os testes. O sistema HX é bom para todas as verificações que o script executou.
- Em situações em que a ferramenta FALHA em algumas verificações ou não é executada com êxito, você pode usar os comandos CLI (listados abaixo) para executar as mesmas verificações no Hyperflex System feitas pelo script Manually.
- A ferramenta NÃO verifica se há advertências antigas/novas/abertas/resolvidas e, portanto, é altamente recomendável rever as Notas de versão do Hyperflex e os Guias de atualização antes de qualquer atividade de atualização ou manutenção.
NOTA: ERRADO abrir um caso TAC porque o script não pôde ser executado. Execute os comandos manualmente, identifique o problema e abra um SR para o problema identificado.
Comandos CLI
No Hyperflex SCVM-
ssh to All Hyperflex SCVMs-
# service_status.sh
# sysmtool --ns cluster --cmd enospcinfo
# echo srvr | nc 0 2181
# pidof exhibitor
# sysmtool --ns disk --cmd list | grep -i blacklisted | wc -l
# stcli services dns show (and ping the IPs listed)
# date ; compare the time on all SCVMs. They should ideally be identical
# stcli services ntp show
# sysmtool --ns cleaner --cmd status
# ntpq -p -4
# dpkg -l | grep -i springpath
# iptables -L -n | wc -l
# hxcli cluster info
# df -h ; check that /var/stv should not be more than 80% used
# zgrep -i “out of memory” /var/log/springpath/debug-storfs.*
# domainjoin-cli query
No nó do HyperV -
Open the Windows Powershell
# Get-ClusterNode
# Get-ClusterNetwork
# Get-Service WinRM, Make sure windows remote management service is running
# Get-Content $env:SystemRoot\System32\Drivers\etc\hosts , Make sure you have correct host entried
# test-path\\<smb-share name fqdn>\<datastorename> This should return true ,if not datastore is not reachable via smb.
# Get-NetIPConfiguration
# Get-NetIPInterface -AddressFamily IPv4 -InterfaceAlias vswitch-hx-storage-data | select NlMtu*
FeedbackContate a Cisco
- Abrir um caso de suporte
- (É necessário um Contrato de Serviço da Cisco)