Inhoud

Inleiding

Voorwaarden

Vereisten

Gebruikte componenten

Conventies

Configuratie

VoIP-opdrachten

samenvatting van spraakpoort

samenvatting van spraakoproepen

toespitsen van de stem van dial-peers

show call active voice-brief

show voice-dsp

Bijlage

Gerelateerde informatie

Inleiding

Dit document bestrijkt de equivalente MIB-objecten die de gegevens bevatten in verschillende VoIP-verificatieopdrachten (Voice-over-IP). NMS toepassingen en/of scripts kunnen deze informatie potentieel gebruiken.

Voorwaarden

Vereisten

Er zijn geen specifieke vereisten van toepassing op dit document.

Gebruikte componenten

Dit document beperkt zich niet tot specifieke softwareversies. Dit is echter specifiek geschreven voor een Cisco 3600 Series router met een NM-2V kaart.

De informatie in dit document is gebaseerd op de apparaten in een specifieke laboratoriumomgeving. Alle apparaten die in dit document worden beschreven, hadden een opgeschoonde (standaard)configuratie. Als uw netwerk live is, moet u de potentiële impact van elke opdracht begrijpen.

Conventies

Raadpleeg Cisco Technical Tips Conventions (Conventies voor technische tips van Cisco) voor meer informatie over documentconventies.

Configuratie

Deze uitvoer toont een relevant gedeelte van de configuratie die in dit document wordt gebruikt:

VoipRouter#show running-configuration

Building configuration...

Current configuration : 5412 bytes

!

version 12.3

...

!

snmp-server community public RO

!

...

!

voice-port 2/0/0

!

...

!

dial-peer voice 2000 pots

destination-pattern 2000

port 2/0/0

!

dial-peer voice 1000 voip

destination-pattern 1000

session target ipv4:172.16.99.22

!

...

end

VoIP-opdrachten

Deze secties tonen de MIB voorwerpen die aan de uitvoer van deze VoIP verificatieopdrachten beantwoorden:

- samenvatting van spraakpoort tonen (alleen voor NM-2V kaart)

- samenvatting van spraakoproepen

- toespitsen van de stem van dial-peers

- show call active Voice brief (alleen voor Cisco 3600 platform)

- toon stem dsp (alleen voor NM-HDV kaart)

De informatie die deze VoIP-verificatieopdrachten bevatten, kan worden afgeleid van IF-MIB, CISCO-VOICE-IF-MIB, CISCO-VOICE-ANALOG-IF-MIB, CISCO-VOICE-DIAL-CONTROL-MIB, DIAL-CONTROL-MIB DSP-MGMT-MIB.

Toelichting: In deze voorbeelden is het telefoongedeelte geïndexeerd door 1102799 en is het H.323-been geïndexeerd door 1102966.

samenvatting van spraakpoort

Opmerking: de vet tekst in de opdracht samenvatting van spraakpoort tonen is geschetst in de sectie Equivalent MIB Objects.

VoipRouter#show voice port summary

IN           OUT

PORT      CH   SIG-TYPE   ADMIN OPER  STATUS       STATUS   EC

========= == ============ ===== ====  ========     ======== ==

2/0/0(A1) --  fxs-ls(A2)  up(A3)up(A4) off-hook(A5) idle     y(A6)

2/0/1     --  fxs-ls      up    dorm   on-hook      idle     y

Equivalente MIB-objecten

A1  —  IF-MIB::ifDescr.37 = STRING: Foreign Exchange Station 2/0/0

A2  —  CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSCfgSignalType.37 = INTEGER: fxsLoopStart(1)

A3  —  IF-MIB::ifAdminStatus.37 = INTEGER: up(1)

A4  —  IF-MIB::ifOperStatus.37 = INTEGER: up(1)

A5  —  CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSHookStatus.37 = INTEGER: offHook(2)

A6  —  CISCO-VOICE-IF-MIB::cvIfCfgEchoCancelEnable.37 = INTEGER: true(1)

Opmerking: Geen MIB Object handhaaft de waarde in het CH gedeelte van het de samenvatting opdracht van de show Voice port wanneer de NM-2V kaart wordt gebruikt.

samenvatting van spraakoproepen

Opmerking: De vet tekst in de opdracht voice-call summiere opdracht is geschetst in de sectie Equivalent MIB Objects.

VoipRouter#show voice call summary

PORT         CODEC      VAD   VTSP STATE            VPM STATE

============ ========   ===   ==================== ======================

2/0/0(B1)    g729r8(B2) y(B3) S_CONNECT             FXSLS_CONNECT

2/0/1         -         -       -                   FXSLS_ONHOOK

Equivalente MIB-objecten

B1  —  IF-MIB::ifDescr.37 = STRING: Foreign Exchange Station 2/0/0

B2  —  CISCO-VOICE-COMMON-DIAL-CONTROL-MIB::cvCommonDcCallActiveCoderTypeRate.

1102966.1 = INTEGER: ietfg729r8000(25)

B3  —  CISCO-VOICE-COMMON-DIAL-CONTROL-MIB::cvCommonDcCallActiveVADEnable.

1102966.1 = INTEGER: true(1)

Opmerking: Er is geen MIB-object dat de VTSP-staten (Voice Telephony Service Provider) en de VPM-staten afzonderlijk handhaaft. Gebruik callActiveCallState van DIAL-CONTROL-MIB in plaats daarvan.

toespitsen van de stem van dial-peers

Opmerking: De vet tekst in de opdracht Voice-peer wordt weergegeven in de sectie Equivalent MIB Objects.

VoipRouter#show dial-peer voice summary

dial-peer hunt 0

AD                                        PRE  PASS

TAG      TYPE     MIN     OPER    PREFIX DEST-PATTERN  FER  THRU SESS-TARGET   PORT

2000(C1) pots(C2)  up(C3)  up(C4) 9(C5)   2000(C6)     0(C7)                2/0/0(C8)

1000     voip      up      up             1000         0    syst ipv4:172.16.99.22(C9)

Equivalente MIB-objecten

C1  —  CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCfgIfIndex.2000 = INTEGER: 90

—  DIAL-CONTROL-MIB::dialCtlPeerCfgLowerIf.2000.90 = INTEGER: 37

C2  —  CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCfgType.2000 = INTEGER: voice(1)

C3  —  IF-MIB::ifAdminStatus.37 = INTEGER: up(1)

C4  —  IF-MIB::ifOperStatus.37 = INTEGER: up(1)

C5  —  CISCO-VOICE-DIAL-CONTROL-MIB::cvVoicePeerCfgDialDigitsPrefix.90 = STRING: 9

C6  —  DIAL-CONTROL-MIB::dialCtlPeerCfgOriginateAddress.2000.90 = STRING: 2000

C7  —  CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgPreference.90 = INTEGER: 0

C8  —  IF-MIB::ifDescr.37 = STRING: Foreign Exchange Station 2/0/0

C9  —  CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgSessionTarget.91 =

STRING: ipv4:172.16.99.22

Opmerking: Geen MIB Object handhaaft de waarde in het PASS THRU-modemgedeelte van de samenvatting-opdracht van dial-peers.

show call active voice-brief

Opmerking: De vet tekst in de show call active voice brief short opdracht is geschetst in de Equivalent MIB Objects sectie.

VoIPRouter#show call active voice brief

<ID>:<start>hs.<index> +<connect> pid:<peer_id> <dir> <addr> <state>

dur hh:mm:ss tx:<packets>/<bytes> rx:<packets>/<bytes>

IP <ip>:<udp> rtt:<time>ms pl:<play>/<gap>ms lost:<lost>/<early>/<late>

delay:<last>/<min>/<max>ms <codec>

MODEMPASS <method> buf:<fills>/<drains> loss <overall%>

<multipkt>/<corrected>

last <buf event time>s dur:<Min>/<Max>s

FR <protocol> [int dlci cid] vad:<y/n> dtmf:<y/n> seq:<y/n>

sig:<on/off> <codec> (payload size)

ATM <protocol> [int vpi/vci cid] vad:<y/n> dtmf:<y/n> seq:<y/n>

sig:<on/off> <codec> (payload size)

Tele <int>:tx:<tot>/<v>/<fax>ms <codec> noise:<l> acom:<l> i/o:<l>/<l>

dBm

MODEMRELAY info:<rcvd>/<sent>/<resent> xid:<rcvd>/<sent>

total:<rcvd>/<sent>/<drops>

Proxy <ip>:<audio udp>,<video udp>,<tcp0>,<tcp1>,<tcp2>,<tcp3> endpt:

<type>/<manf>

bw:<req>/<act> codec:<audio>/<video>

tx:<audio pkts>/<audio bytes>,<video pkts>/<video bytes>,<t120

pkts>/<t120 bytes>

rx:<audio pkts>/<audio bytes>,<video pkts>/<video bytes>,<t120

pkts>/<t120 bytes>

Telephony call-legs: 1

SIP call-legs: 0

H323 call-legs: 1

MGCP call-legs: 0

Total call-legs: 2

11D9 : 1102799(D1)hs.1 +1324 pid:2000(D2) Answer(D3) 2000(D4) active(D5)

dur 1d19h(D6) tx:7875641(D7)/157512782(D8) rx:7875955(D9)/157519081(D10)

Tele 2/0/0(D11):1: tx:157515460(D12)/157514630(D13)/0ms g729r8(D14)

noise:-56(D15) acom:5(D16)  i/0:-40(D17)/-46(D18) dBm

11D9 : 1102966hs.1 +1157 pid:1000 Originate 1000 active

dur 1d19h tx:7875388/157507741 rx:7875641/157512782

IP 172.16.99.22(D19):19066(D20) rtt:6ms(D21) pl:157496940(D22)/4770ms(D23)

lost:52(D24)/1(D25)/325(D26) delay:67(D27)/55(D28)/132ms(D29) g729r8

Telephony call-legs: 1

SIP call-legs: 0

H323 call-legs: 1

MGCP call-legs: 0

Total call-legs: 2

Equivalente MIB-objecten

D1  —  CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveConnectionId.1102799.1

= Hex-STRING: 53 98 B1 3F EB B7 11 D7 80 02 AA AD C2 77 19 FC

D2  —  DIAL-CONTROL-MIB::callActivePeerId.1102799.1 = INTEGER: 2000

D3  —  DIAL-CONTROL-MIB::callActiveCallOrigin.1102799.1 = INTEGER: answer(2)

D4  —  DIAL-CONTROL-MIB::callActivePeerAddress.1102799.1 = STRING: 2000

D5  —  DIAL-CONTROL-MIB::callActiveCallState.1102799.1 = INTEGER: active(4)

D6  —  DIAL-CONTROL-MIB::callActiveConnectTime.1102799.1 = Timeticks:

(1104123) 3:04:01.23

—  DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (16590203) 1 days,

22:05:02.03

D7  —  DIAL-CONTROL-MIB::callActiveTransmitPackets.1102799.1 = Gauge32: 7875641

D8  —  DIAL-CONTROL-MIB::callActiveTransmitBytes.1102799.1 = Gauge32: 157512782

D9  —  DIAL-CONTROL-MIB::callActiveReceivePackets.1102799.1 = Gauge32: 7875955

D10 —  DIAL-CONTROL-MIB::callActiveReceiveBytes.1102799.1 = Gauge32: 157519081

D11 —  IF-MIB::ifDescr.37 = STRING: Foreign Exchange Station 2/0/0

D12 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveTxDuration.

1102799.1 = Gauge32: 157515460 milliseconds

D13 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveVoiceTxDuration.

1102799.1 = Gauge32: 157514630 milliseconds

D14 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveCoderTypeRate.

1102799.1 = INTEGER: ietfg729r8000(25)

D15 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveNoiseLevel.

1102799.1 = INTEGER: -56 dBm

D16 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveACOMLevel.

1102799.1 =  INTEGER: 5 dB

D17 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveInSignalLevel.

1102799.1 = INTEGER: -40 dBm

D18 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveOutSignalLevel.

1102799.1 = INTEGER: -46 dBm

D19 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveRemoteIPAddress.

1102966.1 = IpAddress: 172.16.99.22

D20 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveRemoteUDPPort.

1102966.1 = INTEGER: 19066

D21 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveRoundTripDelay.

1102966.1 = Gauge32: 6 milliseconds

D22 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveOnTimeRvPlayout.

1102966.1 = Gauge32: 157496940 milliseconds

D23 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveGapFillWithSilence.

1102966.1 = Gauge32: 1090 milliseconds

—  CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveGapFillWithPrediction.

1102966.1 = Gauge32: 3680 milliseconds

—  CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveGapFillWithInterpolation.

1102966.1 = Gauge32: 0 milliseconds

D24 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveLostPackets.

1102966.1 = Gauge32: 52 packets

D25 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveEarlyPackets.

1102966.1 = Gauge32: 1 packets

D26 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveLatePackets.

1102966.1 = Gauge32: 325 packets

D27 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveReceiveDelay.

1102966.1 = Gauge32: 67

D28 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveLoWaterPlayoutDelay.

1102966.1 = Gauge32: 55 milliseconds

D29 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveHiWaterPlayoutDelay.

1102966.1 = Gauge32: 132 milliseconds

Opmerking: De gapfill waarde van de opdracht Bel actief stembriefje wordt verkregen wanneer u de SNMP-objecten cvVoIPCallActiveStepWithSilence, cvVoIPCallActiveGapFillWith, voorspelling en cvVoIPCallActiveFillFill Met interpolatie.

show voice-dsp

VoIPRouter#show voice dsp

DSP  DSP             DSPWARE CURR  BOOT                         PAK     TX/RX

TYPE NUM CH CODEC    VERSION STATE STATE   RST AI VOICEPORT TS ABORT  PACK COUNT

==== === == ======== ======= ===== ======= === == ========= == ===== ============

C549 009 01 {medium}  4.1.31 IDLE  idle      0  0 1/0:0     05     0         0/36

02 {medium}  4.1.31 IDLE  idle         0 1/0:0     06     0          0/0

03 {medium}  4.1.31 IDLE  idle         0 1/0:0     07     0          0/0

04 {medium}  4.1.31 IDLE  idle         0 1/0:0     08     0          0/0

C549 010 01 {medium}  4.1.31 IDLE  idle      0  0 1/0:0     09     0          0/0

02 {medium}  4.1.31 IDLE  idle         0 1/0:0     10     0          0/0

03 {medium}  4.1.31 IDLE  idle         0 1/0:0     11     0          0/0

04 {medium}  4.1.31 IDLE  idle         0 1/0:0     12     0          0/0

C549 011 01 {medium}  4.1.31 IDLE  idle      0  0 1/0:0     13     0          0/0

02 {medium}  4.1.31 IDLE  idle         0 1/0:0     14     0          0/0

03 {medium}  4.1.31 IDLE  idle         0 1/0:0     15     0          0/0

04 {medium}  4.1.31 IDLE  idle         0 1/0:0     16     0          0/0

C549 012 01 {medium}  4.1.31 IDLE  idle      0  0 1/0:0     17     0          0/0

02 {medium}  4.1.31 IDLE  idle         0 1/0:0     18     0          0/0

03 {medium}  4.1.31 IDLE  idle         0 1/0:0     19     0          0/0

04 {medium}  4.1.31 IDLE  idle         0 1/0:0     20     0          0/0

C549 013 01 {medium}  4.1.31 IDLE  idle      0  0 1/0:0     21     0          0/0

02 {medium}  4.1.31 IDLE  idle         0 1/0:0     22     0          0/0

03 {medium}  4.1.31 IDLE  idle         0 1/0:0     23     0         0/12

04 g729r8    4.1.31 busy  idle         0 1/0:0     24     0    176/56702

C549 014 01 {medium}  4.1.31 IDLE  idle      0  0 1/0:0     01     0         0/27

02 {medium}  4.1.31 IDLE  idle         0 1/0:0     02     0         0/12

03 {medium}  4.1.31 IDLE  idle         0 1/0:0     03     0         0/12

04 {medium}  4.1.31 IDLE  idle         0 1/0:0     04     0         0/12

Hier zijn een paar nuttige MIB voorwerpen die informatie over de actieve vraag in de voorbeeldoutput van de opdracht van de show stem dsp verstrekken:

CISCO-DSP-MGMT-MIB::cdspCardIndex.7 = INTEGER: 2

OLD-CISCO-CHASSIS-MIB::cardType.2 = INTEGER: hdv(516)

OLD-CISCO-CHASSIS-MIB::cardDescr.2 = STRING: "High Density Voice"

ENTITY-MIB::entPhysicalDescr.7 = STRING: High Density Voice

ENTITY-MIB::entPhysicalDescr.22 = STRING: DSP (C549)

CISCO-DSP-MGMT-MIB::cdspCardState.7 = INTEGER: normal(1)

CISCO-DSP-MGMT-MIB::cdspCardMaxChanPerDSP.7 = Gauge32: 4 channels

CISCO-DSP-MGMT-MIB::cdspTotalChannels.22 = Gauge32: 4 channels

CISCO-DSP-MGMT-MIB::cdspActiveChannels.21 = Gauge32: 1 channels

Opmerking: Het MIB dat de informatie bevat voor show voice dsp is CISCO-DSP-MGMT-MIB. Vanwege Cisco bug-ID CSCeb62542 voor de NM-2V-kaart worden DSP’s op NM-2V echter niet in ENTITY-MIB weergegeven. Aangezien cdspCardStatusTable afhankelijk is van entPhysicalIndex van ENTITY-MIB, is cdspCardStatusTable niet ingevuld voor de NM-2V-kaart.

Bijlage

Deze uitvoer toont de volledige samenvatting van ciscoVoiceAnalogMIB van CISCO-VOICE-ANALOG-IF-MIB op het tijdstip van de VoIP verificatieopdrachten die in dit document worden getoond:

snmpwalk -c public 172.16.100.20 CISCO-VOICE-ANALOG-IF-MIB:ciscoVoiceAnalogIfMIB

CISCO-VOICE-ANALOG-IF-MIB::cvaIfCfgImpedance.37 = INTEGER: ohms600Real(2)

CISCO-VOICE-ANALOG-IF-MIB::cvaIfCfgImpedance.38 = INTEGER: ohms600Real(2)

CISCO-VOICE-ANALOG-IF-MIB::cvaIfCfgIntegratedDSP.37 = INTEGER: false(2)

CISCO-VOICE-ANALOG-IF-MIB::cvaIfCfgIntegratedDSP.38 = INTEGER: false(2)

CISCO-VOICE-ANALOG-IF-MIB::cvaIfStatusInfoType.37 = INTEGER: voice(2)

CISCO-VOICE-ANALOG-IF-MIB::cvaIfStatusInfoType.38 = INTEGER: none(1)

CISCO-VOICE-ANALOG-IF-MIB::cvaIfMaintenanceMode.37 = INTEGER: none(1)

CISCO-VOICE-ANALOG-IF-MIB::cvaIfMaintenanceMode.38 = INTEGER: none(1)

CISCO-VOICE-ANALOG-IF-MIB::cvaIfStatusSignalErrors.37 = Counter32: 0

CISCO-VOICE-ANALOG-IF-MIB::cvaIfStatusSignalErrors.38 = Counter32: 0

CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSCfgSignalType.37 = INTEGER: fxsLoopStart(1)

CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSCfgSignalType.38 = INTEGER: fxsLoopStart(1)

CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSRingFrequency.37 = INTEGER: ringFrequency25(1)

CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSRingFrequency.38 = INTEGER: ringFrequency25(1)

CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSHookStatus.37 = INTEGER: offHook(2)

CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSHookStatus.38 = INTEGER: onHook(1)

CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSRingActive.37 = INTEGER: false(2)

CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSRingActive.38 = INTEGER: false(2)

CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSRingGround.37 = INTEGER: false(2)

CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSRingGround.38 = INTEGER: false(2)

CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSTipGround.37 = INTEGER: false(2)

CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSTipGround.38 = INTEGER: false(2)

CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSTimingDigitDuration.37 =

INTEGER: 100 milliseconds

CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSTimingDigitDuration.38 =

INTEGER: 100 milliseconds

CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSTimingInterDigitDuration.37 =

INTEGER: 100 milliseconds

CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSTimingInterDigitDuration.38 =

INTEGER: 100 milliseconds

Deze uitvoer toont de volledige stap van ciscoVoiceInterfaceMIB van CISCO-VOICE-IF-MIB op het tijdstip van de VoIP-verificatieopdrachten die in dit document worden getoond:

snmpwalk -c public 172.16.100.20 CISCO-VOICE-IF-MIB:ciscoVoiceInterfaceMIB

CISCO-VOICE-IF-MIB::cvIfCfgNoiseRegEnable.37 = INTEGER: true(1)

CISCO-VOICE-IF-MIB::cvIfCfgNoiseRegEnable.38 = INTEGER: true(1)

CISCO-VOICE-IF-MIB::cvIfCfgNonLinearProcEnable.37 = INTEGER: true(1)

CISCO-VOICE-IF-MIB::cvIfCfgNonLinearProcEnable.38 = INTEGER: true(1)

CISCO-VOICE-IF-MIB::cvIfCfgMusicOnHoldThreshold.37 = INTEGER: -38 dBm

CISCO-VOICE-IF-MIB::cvIfCfgMusicOnHoldThreshold.38 = INTEGER: -38 dBm

CISCO-VOICE-IF-MIB::cvIfCfgInGain.37 = INTEGER: 0 dB

CISCO-VOICE-IF-MIB::cvIfCfgInGain.38 = INTEGER: 0 dB

CISCO-VOICE-IF-MIB::cvIfCfgOutAttn.37 = INTEGER: 3 dB

CISCO-VOICE-IF-MIB::cvIfCfgOutAttn.38 = INTEGER: 3 dB

CISCO-VOICE-IF-MIB::cvIfCfgEchoCancelEnable.37 = INTEGER: true(1)

CISCO-VOICE-IF-MIB::cvIfCfgEchoCancelEnable.38 = INTEGER: true(1)

CISCO-VOICE-IF-MIB::cvIfCfgEchoCancelCoverage.37 = INTEGER: 4

CISCO-VOICE-IF-MIB::cvIfCfgEchoCancelCoverage.38 = INTEGER: 4

CISCO-VOICE-IF-MIB::cvIfCfgConnectionMode.37 = INTEGER: normal(1)

CISCO-VOICE-IF-MIB::cvIfCfgConnectionMode.38 = INTEGER: normal(1)

CISCO-VOICE-IF-MIB::cvIfCfgConnectionNumber.37 = STRING:

CISCO-VOICE-IF-MIB::cvIfCfgConnectionNumber.38 = STRING:

CISCO-VOICE-IF-MIB::cvIfCfgInitialDigitTimeOut.37 = INTEGER: 10 seconds

CISCO-VOICE-IF-MIB::cvIfCfgInitialDigitTimeOut.38 = INTEGER: 10 seconds

CISCO-VOICE-IF-MIB::cvIfCfgInterDigitTimeOut.37 = INTEGER: 10 seconds

CISCO-VOICE-IF-MIB::cvIfCfgInterDigitTimeOut.38 = INTEGER: 10 seconds

CISCO-VOICE-IF-MIB::cvIfCfgRegionalTone.37 = STRING: "US"

CISCO-VOICE-IF-MIB::cvIfCfgRegionalTone.38 = STRING: "US"

CISCO-VOICE-IF-MIB::cvIfCfgEntry.13.37 = INTEGER: 1

CISCO-VOICE-IF-MIB::cvIfCfgEntry.13.38 = INTEGER: 1

CISCO-VOICE-IF-MIB::cvIfCfgEntry.14.37 = INTEGER: 1

CISCO-VOICE-IF-MIB::cvIfCfgEntry.14.38 = INTEGER: 1

Deze uitvoer toont de volledige stap van ciscoVoiceDialControlMIB van CISCO-VOICE-DIAL-CONTROL-MIB op het tijdstip van de VoIP-verificatieopdrachten die in dit document worden getoond:

snmpwalk -c public 172.16.100.20 CISCO-VOICE-DIAL-CONTROL-MIB:ciscoVoiceDialControlMIB

CISCO-VOICE-DIAL-CONTROL-MIB::cvGeneralPoorQoVNotificationEnable.0 = INTEGER: true(1)

CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCfgIfIndex.1000 = INTEGER: 91

CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCfgIfIndex.2000 = INTEGER: 90

CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCfgType.1000 = INTEGER: voip(2)

CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCfgType.2000 = INTEGER: voice(1)

CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCfgRowStatus.1000 = INTEGER: active(1)

CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCfgRowStatus.2000 = INTEGER: active(1)

CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCfgEntry.5.1000 = INTEGER: 1

CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCfgEntry.5.2000 = INTEGER: 1

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoicePeerCfgSessionTarget.90 = STRING:

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoicePeerCfgDialDigitsPrefix.90 = STRING: 9

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoicePeerCfgDIDCallEnable.90 = INTEGER: false(2)

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoicePeerCfgCasGroup.90 = INTEGER: -1

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoicePeerCfgRegisterE164.90 = INTEGER: true(1)

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoicePeerCfgForwardDigits.90 = INTEGER: -1

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoicePeerCfgEntry.7.90 = INTEGER: 1

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgSessionProtocol.91 = INTEGER: cisco(2)

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgDesiredQoS.91 = INTEGER: 1

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgMinAcceptableQoS.91 = INTEGER: 1

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgSessionTarget.91 =

STRING: ipv4:172.16.99.22

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgCoderRate.91 =

INTEGER: g729IETFr8000(16)

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgFaxRate.91 = INTEGER: voiceRate(2)

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgVADEnable.91 = INTEGER: true(1)

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgExpectFactor.91 =

INTEGER: 0 equipment impairment factor (eif)

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgIcpif.91 =

INTEGER: 20 equipment impairment factor (eif)

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgPoorQoVNotificationEnable.91 =

INTEGER: false(2)

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgUDPChecksumEnable.91 = INTEGER: false(2)

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgIPPrecedence.91 = INTEGER: 0

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgTechPrefix.91 = STRING:

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgDigitRelay.91 = Hex-STRING: 00

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgCoderBytes.91 = INTEGER: 20 bytes

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgFaxBytes.91 = INTEGER: 20 bytes

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgInBandSignaling.91 = INTEGER: cas(1)

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgEntry.23.91 = INTEGER: 1

CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgIncomingDnisDigits.90 = STRING:

CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgIncomingDnisDigits.91 = STRING:

CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgMaxConnections.90 =

INTEGER: -1 connections

CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgMaxConnections.91 =

INTEGER: -1 connections

CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgApplicationName.90 = STRING:

CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgApplicationName.91 = STRING:

CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgPreference.90 = INTEGER: 0

CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgPreference.91 = INTEGER: 0

CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgHuntStop.90 = INTEGER: false(2)

CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgHuntStop.91 = INTEGER: false(2)

CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgEntry.6.90 = ""

CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgEntry.6.91 = ""

CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgEntry.7.90 = ""

CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgEntry.7.91 = ""

CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgEntry.8.90 = ""

CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgEntry.8.91 = ""

CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgEntry.9.90 = ""

CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgEntry.9.91 = ""

CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgEntry.10.90 = ""

CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgEntry.10.91 = ""

CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveConnectionId.1102799.1 =

Hex-STRING: 53 98 B1 3F EB B7 11 D7 80 02 AA AD C2 77 19 FC

CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveTxDuration.1102799.1 =

Gauge32: 157515460 milliseconds

CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveVoiceTxDuration.1102799.1 =

Gauge32: 157514630 milliseconds

CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveFaxTxDuration.1102799.1 =

Gauge32: 0 milliseconds

CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveCoderTypeRate.1102799.1 =

INTEGER: ietfg729r8000(25)

CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveNoiseLevel.1102799.1 = INTEGER: -56 dBm

CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveACOMLevel.1102799.1 = INTEGER: 5 dB

CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveOutSignalLevel.1102799.1 =

INTEGER: -46 dBm

CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveInSignalLevel.1102799.1 =

INTEGER: -40 dBm

CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveERLLevel.1102799.1 = INTEGER: 5 dB

CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveSessionTarget.1102799.1 = STRING:

CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveImgPageCount.1102799.1 = Gauge32: 0 pages

CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveEntry.13.1102799.1 = ""

CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveEntry.14.1102799.1 = INTEGER: 2

CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveEntry.15.1102799.1 = INTEGER: 19971

CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveEntry.17.1102799.1 = INTEGER: 5

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveConnectionId.1102966.1 =

Hex-STRING: 53 98 B1 3F EB B7 11 D7 80 02 AA AD C2 77 19 FC

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveRemoteIPAddress.1102966.1 =

IpAddress: 172.16.99.22

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveRemoteUDPPort.1102966.1 =

INTEGER: 19066

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveRoundTripDelay.1102966.1 =

Gauge32: 6 milliseconds

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveSelectedQoS.1102966.1 = INTEGER: 1

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveSessionProtocol.1102966.1 =

INTEGER: cisco(2)

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveSessionTarget.1102966.1 =

STRING: ipv4:172.16.99.22

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveOnTimeRvPlayout.1102966.1 =

Gauge32: 157496940 milliseconds

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveGapFillWithSilence.1102966.1 =

Gauge32: 1090 milliseconds

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveGapFillWithPrediction.1102966.1 =

Gauge32: 3680 milliseconds

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveGapFillWithInterpolation.1102966.1 =

Gauge32: 0 milliseconds

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveGapFillWithRedundancy.1102966.1 =

Gauge32: 0 milliseconds

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveHiWaterPlayoutDelay.1102966.1 =

Gauge32: 132 milliseconds

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveLoWaterPlayoutDelay.1102966.1 =

Gauge32: 55 milliseconds

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveReceiveDelay.1102966.1 =

Gauge32: 67

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveVADEnable.1102966.1 =

INTEGER: true(1)

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveCoderTypeRate.1102966.1 =

INTEGER: ietfg729r8000(25)

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveLostPackets.1102966.1 =

Gauge32: 52 packets

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveEarlyPackets.1102966.1 =

Gauge32: 1 packets

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveLatePackets.1102966.1 =

Gauge32: 325 packets

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveEntry.21.1102966.1 = ""

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveEntry.22.1102966.1 = ""

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveEntry.23.1102966.1 = INTEGER: 1

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveEntry.24.1102966.1 =

STRING: "172.16.99.22"

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveEntry.25.1102966.1 = INTEGER: 1720

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveEntry.26.1102966.1 = INTEGER: 1

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveEntry.27.1102966.1 =

STRING: "172.16.99.22"

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveEntry.28.1102966.1 = INTEGER: 19066

Deze uitvoer toont de volledige stap van ciscoVoiceCommonDialControlMIB van CISCO-VOICE-DIAL-CONTROL-MIB op het tijdstip van de VoIP-verificatieopdrachten die in dit document worden getoond:

snmpwalk -c public 172.16.100.20 CISCO-VOICE-COMMON-DIAL-CONTROL-MIB:

ciscoVoiceCommonDialControlMIB

CISCO-VOICE-COMMON-DIAL-CONTROL-MIB::cvCommonDcCallActiveConnectionId.

1102966.1 = Hex-STRING: 53 98 B1 3F EB B7 11 D7 80 02 AA AD C2 77 19 FC

CISCO-VOICE-COMMON-DIAL-CONTROL-MIB::cvCommonDcCallActiveVADEnable.

1102966.1 = INTEGER: true(1)

CISCO-VOICE-COMMON-DIAL-CONTROL-MIB::cvCommonDcCallActiveCoderTypeRate.

1102966.1 = INTEGER: ietfg729r8000(25)

CISCO-VOICE-COMMON-DIAL-CONTROL-MIB::cvCommonDcCallActiveCodecBytes.

1102966.1 = INTEGER: 20

CISCO-VOICE-COMMON-DIAL-CONTROL-MIB::cvCommonDcCallActiveInBandSignaling.

1102966.1 = INTEGER: cas(1)

CISCO-VOICE-COMMON-DIAL-CONTROL-MIB::cvCommonDcCallActiveEntry.6.

1102966.1 = ""

CISCO-VOICE-COMMON-DIAL-CONTROL-MIB::cvCommonDcCallActiveEntry.7.

1102966.1 = INTEGER: 2

Deze uitvoer toont de volledige breuk van dialControlMib van DIAL-CONTROL-MIB op het tijdstip van de VoIP controle opdrachten in dit document die worden getoond:

snmpwalk -c public 172.16.100.20 DIAL-CONTROL-MIB:dialControlMib

DIAL-CONTROL-MIB::dialCtlAcceptMode.0 = INTEGER: acceptAll(2)

DIAL-CONTROL-MIB::dialCtlTrapEnable.0 = INTEGER: enabled(1)

DIAL-CONTROL-MIB::dialCtlPeerCfgIfType.1000.91 = INTEGER: voiceOverIp(104)

DIAL-CONTROL-MIB::dialCtlPeerCfgIfType.2000.90 = INTEGER: voiceFXS(102)

DIAL-CONTROL-MIB::dialCtlPeerCfgLowerIf.1000.91 = INTEGER: 0

DIAL-CONTROL-MIB::dialCtlPeerCfgLowerIf.2000.90 = INTEGER: 37

DIAL-CONTROL-MIB::dialCtlPeerCfgOriginateAddress.1000.91 = STRING: 1000

DIAL-CONTROL-MIB::dialCtlPeerCfgOriginateAddress.2000.90 = STRING: 2000

DIAL-CONTROL-MIB::dialCtlPeerCfgAnswerAddress.1000.91 = STRING:

DIAL-CONTROL-MIB::dialCtlPeerCfgAnswerAddress.2000.90 = STRING:

DIAL-CONTROL-MIB::dialCtlPeerCfgSubAddress.1000.91 = STRING:

DIAL-CONTROL-MIB::dialCtlPeerCfgSubAddress.2000.90 = STRING:

DIAL-CONTROL-MIB::dialCtlPeerCfgSpeed.1000.91 = INTEGER: 0

DIAL-CONTROL-MIB::dialCtlPeerCfgSpeed.2000.90 = INTEGER: 0

DIAL-CONTROL-MIB::dialCtlPeerCfgInfoType.1000.91 = INTEGER: speech(2)

DIAL-CONTROL-MIB::dialCtlPeerCfgInfoType.2000.90 = INTEGER: speech(2)

DIAL-CONTROL-MIB::dialCtlPeerCfgPermission.1000.91 = INTEGER: both(3)

DIAL-CONTROL-MIB::dialCtlPeerCfgPermission.2000.90 = INTEGER: both(3)

DIAL-CONTROL-MIB::dialCtlPeerCfgInactivityTimer.1000.91 = INTEGER: 0 seconds

DIAL-CONTROL-MIB::dialCtlPeerCfgInactivityTimer.2000.90 = INTEGER: 0 seconds

DIAL-CONTROL-MIB::dialCtlPeerCfgMinDuration.1000.91 = INTEGER: 0

DIAL-CONTROL-MIB::dialCtlPeerCfgMinDuration.2000.90 = INTEGER: 0

DIAL-CONTROL-MIB::dialCtlPeerCfgMaxDuration.1000.91 = INTEGER: 0

DIAL-CONTROL-MIB::dialCtlPeerCfgMaxDuration.2000.90 = INTEGER: 0

DIAL-CONTROL-MIB::dialCtlPeerCfgCarrierDelay.1000.91 = INTEGER: 0 seconds

DIAL-CONTROL-MIB::dialCtlPeerCfgCarrierDelay.2000.90 = INTEGER: 0 seconds

DIAL-CONTROL-MIB::dialCtlPeerCfgCallRetries.1000.91 = INTEGER: 0

DIAL-CONTROL-MIB::dialCtlPeerCfgCallRetries.2000.90 = INTEGER: 0

DIAL-CONTROL-MIB::dialCtlPeerCfgRetryDelay.1000.91 = INTEGER: 0 seconds

DIAL-CONTROL-MIB::dialCtlPeerCfgRetryDelay.2000.90 = INTEGER: 0 seconds

DIAL-CONTROL-MIB::dialCtlPeerCfgFailureDelay.1000.91 = INTEGER: 0 seconds

DIAL-CONTROL-MIB::dialCtlPeerCfgFailureDelay.2000.90 = INTEGER: 0 seconds

DIAL-CONTROL-MIB::dialCtlPeerCfgTrapEnable.1000.91 = INTEGER: disabled(2)

DIAL-CONTROL-MIB::dialCtlPeerCfgTrapEnable.2000.90 = INTEGER: disabled(2)

DIAL-CONTROL-MIB::dialCtlPeerCfgStatus.1000.91 = INTEGER: active(1)

DIAL-CONTROL-MIB::dialCtlPeerCfgStatus.2000.90 = INTEGER: active(1)

DIAL-CONTROL-MIB::dialCtlPeerStatsConnectTime.1000.91 = Gauge32: 0 seconds

DIAL-CONTROL-MIB::dialCtlPeerStatsConnectTime.2000.90 = Gauge32: 0 seconds

DIAL-CONTROL-MIB::dialCtlPeerStatsChargedUnits.1000.91 = Gauge32: 0

DIAL-CONTROL-MIB::dialCtlPeerStatsChargedUnits.2000.90 = Gauge32: 0

DIAL-CONTROL-MIB::dialCtlPeerStatsSuccessCalls.1000.91 = Gauge32: 0

DIAL-CONTROL-MIB::dialCtlPeerStatsSuccessCalls.2000.90 = Gauge32: 0

DIAL-CONTROL-MIB::dialCtlPeerStatsFailCalls.1000.91 = Gauge32: 0

DIAL-CONTROL-MIB::dialCtlPeerStatsFailCalls.2000.90 = Gauge32: 0

DIAL-CONTROL-MIB::dialCtlPeerStatsAcceptCalls.1000.91 = Gauge32: 0

DIAL-CONTROL-MIB::dialCtlPeerStatsAcceptCalls.2000.90 = Gauge32: 0

DIAL-CONTROL-MIB::dialCtlPeerStatsRefuseCalls.1000.91 = Gauge32: 0

DIAL-CONTROL-MIB::dialCtlPeerStatsRefuseCalls.2000.90 = Gauge32: 0

DIAL-CONTROL-MIB::dialCtlPeerStatsLastDisconnectCause.1000.91 = ""

DIAL-CONTROL-MIB::dialCtlPeerStatsLastDisconnectCause.2000.90 = ""

DIAL-CONTROL-MIB::dialCtlPeerStatsLastDisconnectText.1000.91 = STRING:

DIAL-CONTROL-MIB::dialCtlPeerStatsLastDisconnectText.2000.90 = STRING:

DIAL-CONTROL-MIB::dialCtlPeerStatsLastSetupTime.1000.91 = Timeticks:

(1102966) 3:03:49.66

DIAL-CONTROL-MIB::dialCtlPeerStatsLastSetupTime.2000.90 = Timeticks:

(1102799) 3:03:47.99

DIAL-CONTROL-MIB::callActivePeerAddress.1102799.1 = STRING: 2000

DIAL-CONTROL-MIB::callActivePeerAddress.1102966.1 = STRING: 1000

DIAL-CONTROL-MIB::callActivePeerSubAddress.1102799.1 = STRING:

DIAL-CONTROL-MIB::callActivePeerSubAddress.1102966.1 = STRING:

DIAL-CONTROL-MIB::callActivePeerId.1102799.1 = INTEGER: 2000

DIAL-CONTROL-MIB::callActivePeerId.1102966.1 = INTEGER: 1000

DIAL-CONTROL-MIB::callActivePeerIfIndex.1102799.1 = INTEGER: 90

DIAL-CONTROL-MIB::callActivePeerIfIndex.1102966.1 = INTEGER: 91

DIAL-CONTROL-MIB::callActiveLogicalIfIndex.1102799.1 = INTEGER: 37

DIAL-CONTROL-MIB::callActiveLogicalIfIndex.1102966.1 = INTEGER: 0

DIAL-CONTROL-MIB::callActiveConnectTime.1102799.1 = Timeticks:

(1104123) 3:04:01.23

DIAL-CONTROL-MIB::callActiveConnectTime.1102966.1 = Timeticks:

(1104123) 3:04:01.23

DIAL-CONTROL-MIB::callActiveCallState.1102799.1 = INTEGER: active(4)

DIAL-CONTROL-MIB::callActiveCallState.1102966.1 = INTEGER: active(4)

DIAL-CONTROL-MIB::callActiveCallOrigin.1102799.1 = INTEGER: answer(2)

DIAL-CONTROL-MIB::callActiveCallOrigin.1102966.1 = INTEGER: originate(1)

DIAL-CONTROL-MIB::callActiveChargedUnits.1102799.1 = Gauge32: 0

DIAL-CONTROL-MIB::callActiveChargedUnits.1102966.1 = Gauge32: 0

DIAL-CONTROL-MIB::callActiveInfoType.1102799.1 = INTEGER: speech(2)

DIAL-CONTROL-MIB::callActiveInfoType.1102966.1 = INTEGER: speech(2)

DIAL-CONTROL-MIB::callActiveTransmitPackets.1102799.1 = Gauge32: 7875641

DIAL-CONTROL-MIB::callActiveTransmitPackets.1102966.1 = Gauge32: 7875388

DIAL-CONTROL-MIB::callActiveTransmitBytes.1102799.1 = Gauge32: 157512782

DIAL-CONTROL-MIB::callActiveTransmitBytes.1102966.1 = Gauge32: 157507741

DIAL-CONTROL-MIB::callActiveReceivePackets.1102799.1 = Gauge32: 7875955

DIAL-CONTROL-MIB::callActiveReceivePackets.1102966.1 = Gauge32: 7875641

DIAL-CONTROL-MIB::callActiveReceiveBytes.1102799.1 = Gauge32: 157519081

DIAL-CONTROL-MIB::callActiveReceiveBytes.1102966.1 = Gauge32: 157512782

DIAL-CONTROL-MIB::callHistoryTableMaxLength.0 = INTEGER: 50

DIAL-CONTROL-MIB::callHistoryRetainTimer.0 = INTEGER: 15 minutes

Gerelateerde informatie

- Cisco IOS MIB-tools

- Cisco SNMP-object Navigator

- SNMP-technische opmerkingen

- Technische ondersteuning en documentatie – Cisco Systems