show running-config cts

To display the Cisco TrustSec configuration in the running configuration, use the show running-config cts command.

show running-config cts

Syntax Description

This command has no arguments or keywords.

Command Default

None

Command Modes

Any command mode

Command History

Release
Modification
5.1(3)N1(1)
This command was introduced.

Usage Guidelines

This command does not require a license.

Examples

This example shows how to display the Cisco TrustSec configuration in the running configuration:

switch# show running-config cts
 
!Command: show running-config cts
!Time: Thu Jan 1 05:33:03 2009
 
version 6.0(0)N1(1)
feature cts
cts role-based counters enable
cts sxp enable
cts sxp connection peer 192.0.2.1 password none mode listener
 
 
interface Ethernet1/5
cts manual
policy static sgt 0x3
 
switch#

Related Commands

Command
Description
copy running-config startup-config
Copies the running configuration information to the startup configuration file.
feature cts
Enables the Cisco TrustSec feature.