cts sxp enable

To enable the Security Group Tag (SGT) Exchange Protocol (SXP) peer on a device, use the cts sxp enable command. To revert to the default, use the no form of this command.

cts sxp enable

no cts sxp enable

Syntax Description

This command has no arguments or keywords.

Command Default

Disabled

Command Modes

Global configuration mode

Command History

Release
Modification
5.1(3)N1(1)
This command was introduced.

Usage Guidelines

To use this command, you must first enable the 802.1X feature by using the feature dot1x command and then enable the Cisco TrustSec feature using the feature cts command.

This command does not require a license.

Examples

This example shows how to enable SXP:

switch# configure terminal
switch(config)# cts sxp enable
switch(config)#
 

This example shows how to disable SXP:

switch# configure terminal
switch(config)# no cts sxp enable
switch(config)#

Related Commands

Command
Description
feature cts
Enables the Cisco TrustSec feature.
feature dot1x
Enables the 802.1X feature on the switch.
show cts sxp
Displays the Cisco TrustSec SXP configuration information.