cts device-id

To configure a Cisco TrustSec device identifier, use the cts device-id command.

cts device-id device-id password [ 7 ] password

Syntax Description

device-id
Cisco TrustSec device identifier name. The name is alphanumeric and case-sensitive. The maximum length is 32 characters.
password
Specifies the password (in clear text or encrypted) to use during EAP-FAST processing.
7
(Optional) Specifies that the password is in encrypted text.
password
Password for the Cisco TrustSec device. It contains up to 32 alphanumeric, case-sensitive characters.

Command Default

No Cisco TrustSec device identifier
Clear text password

Command Modes

Global configuration mode

Command History

Release
Modification
5.1(3)N1(1)
This command was introduced.

Usage Guidelines

To use this command, you must first enable the 802.1X feature by using the feature dot1x command and then enable the Cisco TrustSec feature using the feature cts command.

The Cisco TrustSec device identifier name must be unique.

This command does not require a license.

Examples

This example shows how to configure a Cisco TrustSec device identifier:

switch# configure terminal
swtich(config)# cts device-id DeviceA password Cisco321
swtich(config)#
 

Related Commands

Command
Description
feature cts
Enables the Cisco TrustSec feature.
feature dot1x
Enables the 802.1X feature.
show cts credentials
Displays the Cisco TrustSec credentials information.