show running-config security

To display user account, Secure Shell (SSH) server, and Telnet server information in the running configuration, use the show running-config security command.

show running-config security [ all ]

Syntax Description

all
(Optional) Displays default user account, SSH server, and Telnet server configuration information.

Command Default

None

Command Modes

EXEC mode

Command History

Release
Modification
4.0(0)N1(1a)
This command was introduced.

Examples

This example shows how to display user account, SSH server, and Telnet server information in the running configuration:

switch# show running-config security
 

In Cisco NX-OS Release 5.0(2)N1(1), the following output is displayed:

 
!Command: show running-config security
!Time: Wed Aug 25 10:27:20 2010
 
version 5.0(2)N1(1)
feature telnet
 
username admin password 5 $1$eKzwPRms$5QB0PxpkXdp6ZKkME/vSS1 role network-admin
username praveena password 5 $1$9w6ZnM/R$Pg5OfsV/vkOaAGW.f.RyP. role network-op
erator
username install password 5 ! role network-admin
username user1 password 5 ! role priv-5
no password strength-check
 
 
switch#
 

Related Commands

Command
Description
ssh
Creates a Secure Shell (SSH) connection using IPv4.
ssh6
Creates a Secure Shell (SSH) connection using IPv6.
telnet
Creates a Telnet session using IPv4.
telnet6
Creates a Telnet session using IPv6.
username
Configures a user account.