show running-config aclmgr

To display the access control list (ACL) configuration in the running configuration, use the show running-config aclmgr command.

show running-config aclmgr [ all ]

Syntax Description

all
(Optional) Displays configured and default information.

Command Default

None

Command Modes

Any command mode

Command History

Release
Modification
5.0(2)N1(1)
This command was introduced.

Examples

This example shows how to display the ACL running configuration:

switch# show running-config aclmgr
 
!Command: show running-config aclmgr
!Time: Tue Aug 31 05:01:56 2010
 
version 5.0(2)N1(1)
ip access-list BulkData
10 deny ip any any
ip access-list CriticalData
10 deny ip any any
ip access-list Scavenger
10 deny ip any any
mac access-list acl-mac
10 permit any any
ip access-list denyv4
20 deny ip 10.10.10.0/24 10.20.10.0/24 fragments
30 permit udp 10.10.10.0/24 10.20.10.0/24 lt 400
40 permit icmp any any router-advertisement
60 deny tcp 10.10.10.0/24 10.20.10.0/24 syn
70 permit igmp any any host-report
80 deny tcp any any rst
90 deny tcp any any ack
100 permit tcp any any fin
110 permit tcp any gt 300 any lt 400
130 deny tcp any range 200 300 any lt 600
140 deny tcp any range 200 300 any lt 600
ip access-list dot
statistics per-entry
10 permit ip 20.1.1.1 255.255.255.0 20.10.1.1 255.255.255.0 precedence flash-override
:
<snip>
:
vlan access-map vacl-mac
match mac address acl-mac
action forward
statistics per-entry
vlan filter vacl-mac vlan-list 300
 
interface Ethernet1/1
ipv6 port traffic-filter denv6 in
 
interface Ethernet1/2
ip port access-group voice in
 
interface Ethernet1/9
ipv6 port traffic-filter denv6 in
 
interface Ethernet1/10
ipv6 port traffic-filter denv6 in
 
line vty
access-class myACList in
access-class myACList out
ipv6 access-class myI6List out
 
switch#
 

This example shows how to display only the VTY running configuration:

switch# show running-config aclmgr | begin vty
line vty
access-class myACList in
access-class myACList out
ipv6 access-class myI6List out
 
switch#
 

Related Commands

Command
Description
access-class
Configures access classes for VTY.
copy running-config startup-config
Copies the running configuration to the startup configuration file.
ip access-class
Configures IPv4 access classes for VTY.
ipv6 access-class
Configures IPv6 access classes for VTY.
show startup-config aclmgr
Displays the ACL startup configuration.