show http-server

To display information about the HTTP or HTTPS configuration, use the show http-server command.

show http-server

Syntax Description

This command has no arguments or keywords.

Command Default

None

Command Modes

EXEC mode

Command History

Release
Modification
5.0(2)N1(1)
This command was introduced.

Usage Guidelines

In releases earlier than Cisco NX-OS Release 5.0(2)N1(1), HTTP or HTTPS is enabled on the switch by default.

Examples

This example shows how to display the status of the HTTP server:

switch# show http-server
http-server enabled
switch#
 

Related Commands

Command
Description
feature http-server
Enables or disables the HTTP or HTTPS server on the switch.