radius-server directed-request

To allow users to send authentication requests to a specific RADIUS server when logging in, use the radius-server directed request command. To revert to the default, use the no form of this command.

radius-server directed-request

no radius-server directed-request

Syntax Description

This command has no arguments or keywords.

Command Default

Sends the authentication request to the configured RADIUS server group.

Command Modes

Global configuration mode

Command History

Release
Modification
4.0(0)N1(1a)
This command was introduced.

Usage Guidelines

You can specify the username @ vrfname : hostname during login, where vrfname is the VRF to use and hostname is the name of a configured RADIUS server. The username is sent to the RADIUS server for authentication.

Examples

This example shows how to allow users to send authentication requests to a specific RADIUS server when logging in:

switch(config)# radius-server directed-request
 

This example shows how to disallow users to send authentication requests to a specific RADIUS server when logging in:

switch(config)# no radius-server directed-request
 

Related Commands

Command
Description
show radius-server directed-request
Displays the directed request RADIUS server configuration.