deadtime

To configure the dead-time interval for a RADIUS or TACACS+ server group, use the deadtime command. To revert to the default, use the no form of this command.

deadtime minutes

no deadtime minutes

Syntax Description

minutes
Number of minutes for the interval. The range is from 0 to 1440 minutes. Setting the dead-time interval to 0 disables the timer.

Command Default

0 minutes

Command Modes

RADlUS server group configuration
TACACS+ server group configuration

Command History

Release
Modification
4.0(0)N1(1a)
This command was introduced.

Usage Guidelines

You must use the feature tacacs+ command before you configure TACACS.

Examples

This example shows how to set the dead-time interval to 2 minutes for a RADIUS server group:

switch(config)# aaa group server radius RadServer
switch(config-radius)# deadtime 2
 

This example shows how to set the dead-time interval to 5 minutes for a TACACS+ server group:

switch(config)# aaa group server tacacs+ TacServer
switch(config-tacacs+)# deadtime 5
 

This example shows how to revert to the dead-time interval default:

switch(config)# aaa group server tacacs+ TacServer
switch(config-tacacs+)# no deadtime 5
 

Related Commands

Command
Description
aaa group server
Configures AAA server groups.
feature tacacs+
Enables TACACS+.
radius-server host
Configures a RADIUS server.
show radius-server groups
Displays RADIUS server group information.
show tacacs-server groups
Displays TACACS+ server group information.
tacacs-server host
Configures a TACACS+ server.