show ip rip

To display the configuration and status of the Routing Information Protocol (RIP), use the show ip rip command in any mode.

show ip rip [ instance-tag ] [ vrf vrf-name ]

Syntax Description

(Optional) RIP instance. The instance tag can be a maximum of 20 alphanumeric characters.
vrf vrf-name
(Optional) Specifies the name of the virtual routing and forwarding (VRF) instance. The vrf-name argument can be specified as any case-sensitive, alphanumeric string up to 32 characters. The strings default and all are reserved VRF names.

Command Default

No default behavior or values

Command Modes

Any command mode

Command History

This command was introduced.


This example shows how to display the RIP configuration information:

switch(config-if)# show ip rip

Related Commands

show ip rip interface
Displays RIP information for an interface.
show ip rip neighbor
Displays RIP neighbor information.
show ip rip policy statistics
Displays RIP policy statistics.
show ip rip route
Displays RIP route information.
show ip rip statistics
Displays RIP statistics.