show ip rip route

To display route information from the Routing Information Protocol (RIP) topology table, use the show ip rip route command in any mode.

show ip rip route [ prefix / length ] [ summary ] [ vrf vrf-name ]

Syntax Description

prefix / length
(Optional) IP prefix about which routing information should be displayed.
summary
(Optional) Displays information about summary routes.
vrf vrf-name
(Optional) Specifies the name of the virtual routing and forwarding (VRF) instance. The vrf-name argument can be specified as any case-sensitive, alphanumeric string up to 32 characters. The strings default and all are reserved VRF names.

Command Default

No default behavior or values

Command Modes

Any command mode

Command History

Release
Modification
5.0(3)N1(1)
This command was introduced.

Examples

This example shows how to display route information from the RIP topology table:

switch# show ip rip route
 

Related Commands

Command
Description
show ip rip
Displays RIP information.
show ip rip interface
Displays RIP information for an interface.
show ip rip neighbor
Displays RIP information for a neighbor.
show ip rip policy statistics
Displays policy statistics for RIP.
show ip rip statistics
Displays RIP statistics.