show ip rip interface

To display interface entry information from the Routing Information Protocol (RIP) topology table, use the show ip rip interface command in any mode.

show ip rip interface [ type slot / port ] [ vrf vrf-name ]

Syntax Description

interface type slot / port
(Optional) Specifies the interface.
vrf vrf-name
(Optional) Specifies the name of the virtual routing and forwarding (VRF) instance. The vrf-name argument can be specified as any case-sensitive, alphanumeric string up to 32 characters. The strings default and all are reserved VRF names.

Command Default

This command has no default settings.

Command Modes

Any command mode

Command History

This command was introduced.


This example shows how to display the neighbor information for a specified interface from the RIP topology table:

switch(config-if)# show ip rip interface ethernet 1/2

Related Commands

show ip rip
Displays RIP information.
show ip rip neighbor
Displays RIP neighbor information.
show ip rip policy statistics
Displays RIP policy statistics.
show ip rip route
Displays RIP route information.
show ip rip statistics
Displays RIP statistics.