router rip

To configure the Routing Information Protocol (RIP) routing process, use the router rip command. To turn off the RIP routing process, use the no form of this command.

router rip instance-tag

no router rip

Syntax Description

instance-tag
Name for this RIP instance.

Command Default

No RIP routing process is defined.

Command Modes

Global configuration mode

Command History

Release
Modification
5.0(3)N1(1)
This command was introduced.

Examples

This example shows how to begin the RIP routing process:

switch(config)# router rip Enterprise
 

Related Commands

Command
Description
ip router rip
Specifies a RIP instance for an interface.