To display information about the running-system configuration for quality of service (QoS), use the show running-config ipqos command.
show running-config ipqos [ all ]
|
all
|
(Optional) Displays configured and default information.
|
None
EXEC mode
|
Release
|
Modification
|
|---|---|
|
5.0(2)N1(1)
|
This command was introduced.
|
|
5.0(3)N1(1)
|
Support to display Layer 3 interfaces was added.
|
Use this command to view a list of default and configured class maps and policy maps and the policies attached to interfaces.
This example shows how to display QoS information on a switch that runs Cisco NX-OS Release 5.0(2)N1(1):
This example shows how to display QoS information on a switch that runs Cisco NX-OS Release 5.0(3)N1(1):
The above display shows the QoS information for Layer 3 interfaces (Ethernet 1/5 configured as a Layer 3 interface).
|
Command
|
Description
|
|---|---|
|
copy running-config startup-config
|
Copies the running configuration to the startup configuration file.
|
|
show class-map
|
Displays information about class maps.
|
|
show policy-map
|
Displays information about policy maps.
|