show running-config copp

To display Control Plane Policing (CoPP) configuration information in the running configuration, use the show running-config copp command.

show running-config copp [ all ]

Syntax Description

all
(Optional) Displays configured and default information.

Command Default

None

Command Modes

Any command mode

Command History

Release
Modification
5.1(3)N1(1)
This command was introduced.

Usage Guidelines

This command does not require a license.

Examples

This example shows how to display the configured CoPP information in the running configuration on a switch that runs Cisco NX-OS Release 5.1(3)N1(1):

switch# show running-config copp
 

This example shows how to display the configured and default CoPP information in the running configuration:

switch# show running-config copp all
 

Related Commands

Command
Description
control-plane
Enters the control-plane configuration mode.
copy running-config startup-config
Copies the running configuration to the startup configuration file.
show startup-config aclmgr
Displays the ACL startup configuration.
show startup-config copp
Displays the CoPP configuration information in the startup configuration file.