show policy-map

To display policy maps, use the show policy-map command.

show policy-map [ type { network-qos | qos | queuing }] [ policy-map-name ]

Syntax Description

type
(Optional) Specifies the component type to display.
network-qos
Displays policy maps of type network-qos.
qos
Displays policy maps of type qos only.
queuing
Displays policy maps of type queuing only.
policy-map-name
(Optional) Named policy map. The name can be a maximum of 40 alphanumeric characters.

Command Default

None

Command Modes

Any command mode

Command History

Release
Modification
4.1(3)N1(1)
This command was introduced.

Usage Guidelines

When you enter the show policy-map command with no arguments or keywords, the system also displays the Control Plane Policing (CoPP) information.

Examples

This example shows how to display a named network-qos policy map:

switch# show policy-map type network-qos my_pnq
 
 
Type network-qos policy-maps
===============================
 
policy-map type network-qos my_pnq
class type network-qos cl_nq
multicast-optimize
queue-limit 20480 bytes
mtu 1500
class type network-qos class-fcoe
pause no-drop
mtu 2158
class type network-qos class-default
mtu 1500
switch#
 

Related Commands

Command
Description
policy-map
Creates or modifies a policy map.