show policy-map type control-plane

To display control plane policy map information, use the show policy-map type control-plane command.

show policy-map type control-plane [ expand ] [ name policy-map-name ]

Syntax Description

expand
(Optional) Displays expanded control plane policy map information.
name policy-map-name
(Optional) Specifies the name of the control plane policy map. The name is case sensitive and can be a maximum of 64 alphanumeric characters.

Command Default

None

Command Modes

Any command mode

Command History

Release
Modification
5.1(3)N1(1)
This command was introduced.

Usage Guidelines

This command does not require a license.

Examples

This example shows how to display control plane policy map information:

switch# show policy-map type control-plane
 
policy-map type control-plane copp-system-policy-customized
class copp-system-class-igmp
police cir 1024 kbps bc 65535 bytes
class copp-system-class-pim-hello
police cir 1024 kbps bc 4800000 bytes
class copp-system-class-bridging
police cir 20000 kbps bc 4800000 bytes
class copp-system-class-arp
police cir 1024 kbps bc 3600000 bytes
class copp-system-class-dhcp
police cir 1024 kbps bc 4800000 bytes
class copp-system-class-mgmt
police cir 12000 kbps bc 4800000 bytes
class copp-system-class-lacp
police cir 1024 kbps bc 4800000 bytes
class copp-system-class-lldp
police cir 2048 kbps bc 4800000 bytes
class copp-system-class-udld
police cir 2048 kbps bc 4800000 bytes
<--Output truncated-->
switch#
 

This example shows how to display control plane policy map information in expanded format:

switch# show policy-map type control-plane expand
 

Related Commands

Command
Description
policy-map type control-plane
Creates or configures a control plane policy map.